[Wed Dec 28 02:28:53 2011] Detection parameters:
  Position = (301.3, 149.6) = 15 15 21.20 0 35 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.2 +/- 9.3
  Background counts = 4.9
  Rate = 0.004 +/- 0.0008

[Wed Dec 28 02:28:53 2011] Off-axis axis estimate = 10.79'
[Wed Dec 28 04:44:47 2011] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Wed Dec 28 04:44:47 2011] Initial guess for spatial extent in simple fitting = 11.83"
[Wed Dec 28 04:44:47 2011] source mask rpix=2.7, npix_max = 41, mask sum = 49, frac = 1.182
[Wed Dec 28 04:44:47 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 11.83"
[Wed Dec 28 05:54:05 2011] fullrun_mos2_xmm0556210501_pi300-10000_cl_pass0_src7.ximg exists
[Wed Dec 28 05:54:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556210501_pi300-10000_cl_pass0_src7.csv
[Wed Dec 28 05:54:05 2011] fullrun_mos2_xmm0556210501_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Dec 28 05:54:05 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556210501_pi300-10000_cl_pass0_src7.csv
[Wed Dec 28 05:54:05 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556210501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556210501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 05:54:05 2011] fullrun_mos2_xmm0556210501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Dec 28 05:54:05 2011] fullrun_mos2_xmm0556210501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Dec 28 05:54:05 2011] Fit fullrun_mos2_xmm0556210501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Dec 28 05:54:25 2011] Spatial fit model total counts = 104.975000, observed total counts = 105.000000
[Wed Dec 28 05:54:25 2011] Offset between fit and detection position for source 16 = 0.107731 pixels
[Wed Dec 28 05:54:25 2011] 104.380700 total counts/ 75.257800 bgd. counts: snr = 3.357058
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.107731 pixels
  Position = (301.4, 149.5) = 15 15 21.19 0 35 12.9
  Extent = 4.2 (3.0-6.0)", rotation angle = 0
  Source counts = 29.1 +/- 10.2
  Background counts = 75.3
  Rate = 0.002 +/- 0.0008
[Wed Dec 28 05:54:25 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 05:54:25 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 05:54:25 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 05:54:25 2011] Source does appear to be extended
[Wed Dec 28 05:54:25 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 07:58:16 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Dec 28 07:58:16 2011] Initial guess for spatial extent in simple fitting = 4.19"
[Wed Dec 28 07:58:16 2011] source mask rpix=1.0, npix_max = 8, mask sum = 9, frac = 1.051
[Wed Dec 28 07:58:16 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 4.19"
[Wed Dec 28 09:06:38 2011] fullrun_mos2_xmm0556210501_pi300-10000_cl_pass1_src7.ximg exists
[Wed Dec 28 09:06:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556210501_pi300-10000_cl_pass1_src7.csv
[Wed Dec 28 09:06:38 2011] fullrun_mos2_xmm0556210501_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Dec 28 09:06:38 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556210501_pi300-10000_cl_pass1_src7.csv
[Wed Dec 28 09:06:38 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556210501_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556210501_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Dec 28 09:06:38 2011] fullrun_mos2_xmm0556210501_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Dec 28 09:06:38 2011] fullrun_mos2_xmm0556210501_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Dec 28 09:06:38 2011] Fit fullrun_mos2_xmm0556210501_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Dec 28 09:07:03 2011] Spatial fit model total counts = 105.905000, observed total counts = 105.000000
[Wed Dec 28 09:07:03 2011] Offset between fit and detection position for source 16 = 0.048937 pixels
[Wed Dec 28 09:07:03 2011] 105.301500 total counts/ 75.774700 bgd. counts: snr = 3.391988
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 0.048937 pixels
  Position = (301.4, 149.5) = 15 15 21.19 0 35 13.1
  Extent = 4.1 (2.9-6.1)", rotation angle = 0
  Source counts = 29.5 +/- 10.3
  Background counts = 75.8
  Rate = 0.002 +/- 0.0008
[Wed Dec 28 09:07:03 2011] Vigneting correction estimate = 1.000000
[Wed Dec 28 09:07:03 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Dec 28 09:07:03 2011] Assessing source extent using major axis lower bound
[Wed Dec 28 09:07:03 2011] Source does appear to be extended
[Wed Dec 28 09:07:03 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Dec 28 10:24:23 2011] XMMSAS src. selection expression = ellipse(26171.276800, 12958.867000, 245.208007, 245.208007, 0.000000, X, Y)
[Wed Dec 28 10:24:23 2011] Writing source region out to fullrun_mos2_xmm0556210501_pi300-10000_pass1_cl_src16_src.reg
[Wed Dec 28 10:24:23 2011] Extracting stamp from image fullrun_mos2_xmm0556210501_pi300-10000_cl_sm2.00.img.gz, (287, 135) - (315, 164)
[Wed Dec 28 10:24:23 2011] XMMSAS bgd. selection expression = annulus(26171.276800, 12958.867000, 408.680012, 817.360024, X, Y)
[Wed Dec 28 10:24:23 2011] Writing fullrun_mos2_xmm0556210501_pi300-10000_pass1_cl_src16.gif
[Wed Dec 28 10:30:10 2011] Mean detx,y = (5753.44, -13764.64) 
[Wed Dec 28 10:30:15 2011] Setting backscal keywords in source and bgd. spectrum
[Wed Dec 28 10:30:36 2011] Binned source spectrum to 10 counts/bin
[Wed Dec 28 10:30:36 2011] Setting source spectrum file to fullrun_mos2_xmm0556210501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Dec 28 10:30:36 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0556210501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Dec 28 11:00:25 2011] Not generating rmf since there are only 29 counts
[Wed Dec 28 11:00:25 2011] rmf not generated due to insufficient counts
[Wed Dec 28 11:01:56 2011] Updating aperture counts using extracted products
[Wed Dec 28 11:01:56 2011] Error reading totcts from fullrun_mos2_xmm0556210501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Wed Dec 28 11:01:57 2011] Calculating source flux in energy range 0.30-8.00
[Wed Dec 28 11:01:57 2011] Using photon index=1.80, rate=0.00243, arf fullrun_mos2_xmm0556210501_pi300-10000_pass1_cl_src16.arf
[Wed Dec 28 11:01:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Dec 28 11:01:57 2011] Updating source flux to 9.3e-14
[Wed Dec 28 11:02:01 2011] Source 16 has fewer than 100.000000 counts, skipping spectral fitting