[Tue May 21 05:56:55 2013] Detection parameters:
  Position = (459.0, 233.1) = 9 27 15.56 50 45 31.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.6 +/- 10.5
  Background counts = 12.2
  Rate = 0.005 +/- 0.0009

[Tue May 21 05:56:57 2013] Off-axis axis estimate = 12.57'
[Tue May 21 05:59:20 2013] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Tue May 21 05:59:20 2013] Initial guess for spatial extent in simple fitting = 12.71"
[Tue May 21 05:59:20 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.897
[Tue May 21 05:59:20 2013] Giving source the simple spatial ID 11 for pass 0, mean size = 12.71"
[Tue May 21 06:55:33 2013] fullrun_pn_xmm0556210401_pi300-10000_cl_pass0_src11.ximg exists
[Tue May 21 06:55:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210401_pi300-10000_cl_pass0_src11.csv
[Tue May 21 06:55:33 2013] fullrun_pn_xmm0556210401_pi300-10000_cl_pass0_src11_1.ximg exists
[Tue May 21 06:55:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210401_pi300-10000_cl_pass0_src11.csv
[Tue May 21 06:55:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556210401_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556210401_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 06:55:33 2013] fullrun_pn_xmm0556210401_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Tue May 21 06:55:33 2013] fullrun_pn_xmm0556210401_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Tue May 21 06:55:33 2013] Fit fullrun_pn_xmm0556210401_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Tue May 21 07:45:33 2013] Spatial fit model total counts = 168.923000, observed total counts = 153.000000
[Tue May 21 07:45:33 2013] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 07:45:33 2013] Vigneting correction estimate = 1.000000
[Tue May 21 07:45:33 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 07:45:33 2013] Assessing source extent using major
[Tue May 21 07:45:33 2013] Source does appear to be extended
[Tue May 21 07:45:33 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 07:45:56 2013] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Tue May 21 07:45:56 2013] Initial guess for spatial extent in simple fitting = 12.71"
[Tue May 21 07:45:56 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.897
[Tue May 21 07:45:56 2013] Giving source the simple spatial ID 11 for pass 1, mean size = 12.71"
[Tue May 21 08:40:57 2013] fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_src11.ximg exists
[Tue May 21 08:40:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_src11.csv
[Tue May 21 08:40:57 2013] fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_src11_1.ximg exists
[Tue May 21 08:40:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_src11.csv
[Tue May 21 08:40:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:40:58 2013] fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Tue May 21 08:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue May 21 08:40:58 2013] fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Tue May 21 08:40:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src11.csv
[Tue May 21 08:40:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 09:20:44 2013] Warning, spatial fit 11 centroid is now closest to src. 7
[Tue May 21 09:20:44 2013] Vigneting correction estimate = 1.000000
[Tue May 21 09:20:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 09:20:44 2013] Assessing source extent using major
[Tue May 21 09:20:44 2013] Source does appear to be extended
[Tue May 21 09:20:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 09:20:57 2013] XMMSAS src. selection expression = ellipse(39881.284760, 20229.741592, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 09:20:57 2013] Writing source region out to fullrun_pn_xmm0556210401_pi300-10000_pass1_cl_src12_src.reg
[Tue May 21 09:20:57 2013] Extracting stamp from image fullrun_pn_xmm0556210401_pi300-10000_cl_sm2.00.img.gz, (421, 196) - (496, 271)
[Tue May 21 09:20:57 2013] XMMSAS bgd. selection expression = annulus(39881.284760, 20229.741592, 1087.500000, 2175.000000, X, Y) && !ellipse(41812.622101, 20732.562988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41554.356781, 17999.917892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40502.609660, 17513.903200, 746.915221, 286.201608, 98.157910, X, Y)
[Tue May 21 09:20:57 2013] Writing fullrun_pn_xmm0556210401_pi300-10000_pass1_cl_src12.gif
[Tue May 21 09:26:59 2013] Mean detx,y = (-10150.79, -10533.73) 
[Tue May 21 09:27:02 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 09:27:22 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 09:27:23 2013] Setting source spectrum file to fullrun_pn_xmm0556210401_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Tue May 21 09:27:23 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556210401_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Tue May 21 09:44:25 2013] Not generating rmf since there are only 57 counts
[Tue May 21 09:44:25 2013] rmf not generated due to insufficient counts
[Tue May 21 10:06:11 2013] Updating aperture counts using extracted products
[Tue May 21 10:06:11 2013] Total counts from fullrun_pn_xmm0556210401_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 117.00
[Tue May 21 10:06:11 2013] Total counts from fullrun_pn_xmm0556210401_pi300-10000_pass1_cl_src12_bgd.pi.gz = 620.00
[Tue May 21 10:06:11 2013] Got source and background scale factors 1177192.000000, 8824938.000000
[Tue May 21 10:06:11 2013] User source parameters:
  Position = (459.0, 233.1) = 9 27 15.56 50 45 31.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 34.3 +/- 11.9
  Background aperture counts = 82.7
  Rate = 0.003 +/- 0.001

[Tue May 21 10:06:11 2013] Updating counts from extracted products
[Tue May 21 10:06:11 2013] Set source signif. to 34.30/9.09 = 3.77
[Tue May 21 10:06:15 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 10:06:15 2013] Using photon index=1.80, rate=0.00285, arf fullrun_pn_xmm0556210401_pi300-10000_pass1_cl_src12.arf
[Tue May 21 10:06:15 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 10:06:15 2013] Updating source flux to 2.1e-14
[Tue May 21 10:06:24 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 10:06:25 2013] xmm0556210401/analysis//spectral/fullrun_pn_xmm0556210401_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete