[Tue May 21 05:57:24 2013] Detection parameters:
  Position = (186.2, 293.9) = 9 29 20.70 50 49 57.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 94.1 +/- 12.1
  Background counts = 6.3
  Rate = 0.01 +/- 0.001

[Tue May 21 05:57:24 2013] Off-axis axis estimate = 8.15'
[Tue May 21 06:55:34 2013] Using EEF radius (= 10.50 ")to estimate initial spatial extent for simple fitting
[Tue May 21 06:55:34 2013] Initial guess for spatial extent in simple fitting = 10.50"
[Tue May 21 06:55:34 2013] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.060
[Tue May 21 06:55:34 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.50"
[Tue May 21 07:20:08 2013] fullrun_mos1_xmm0556210401_pi300-10000_cl_pass0_src3.ximg exists
[Tue May 21 07:20:08 2013] fullrun_mos1_xmm0556210401_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue May 21 07:20:08 2013] Fit fullrun_mos1_xmm0556210401_pi300-10000_cl_pass0_src3 appears to have run properly
[Tue May 21 07:20:08 2013] fullrun_mos1_xmm0556210401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue May 21 07:20:08 2013] fullrun_mos1_xmm0556210401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue May 21 07:20:08 2013] Fit fullrun_mos1_xmm0556210401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue May 21 07:45:38 2013] Spatial fit model total counts = 134.437000, observed total counts = 133.000000
[Tue May 21 07:45:38 2013] Offset between fit and detection position for source 4 = 0.104448 pixels
[Tue May 21 07:45:38 2013] 138.869700 total counts/ 50.361300 bgd. counts: snr = 12.471998
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.104448 pixels
  Position = (186.1, 293.9) = 9 29 20.74 50 49 57.3
  Extent = 9.4 (6.9-11.4)" x 5.7 (3.5-7.7)", rotation angle = 284 (265-304) degrees
  Source counts = 88.5 +/- 11.8
  Background counts = 50.4
  Rate = 0.007 +/- 0.0009
[Tue May 21 07:45:38 2013] Vigneting correction estimate = 1.000000
[Tue May 21 07:45:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 07:45:38 2013] Assessing source extent using major axis lower bound
[Tue May 21 07:45:38 2013] Source does appear to be extended
[Tue May 21 07:45:38 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Tue May 21 08:40:58 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 08:40:58 2013] Initial guess for spatial extent in simple fitting = 7.54"
[Tue May 21 08:40:58 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.802
[Tue May 21 08:40:58 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 7.54"
[Tue May 21 08:59:18 2013] fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_src3.ximg exists
[Tue May 21 08:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_src3.csv
[Tue May 21 08:59:18 2013] fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_src3_1.ximg exists
[Tue May 21 08:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_src3.csv
[Tue May 21 08:59:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:59:18 2013] fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Tue May 21 08:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 21 08:59:18 2013] fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Tue May 21 08:59:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src3.csv
[Tue May 21 08:59:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556210401_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 09:20:46 2013] Warning, spatial fit 3 centroid is now closest to src. 13
[Tue May 21 09:20:46 2013] Vigneting correction estimate = 1.000000
[Tue May 21 09:20:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 09:20:46 2013] Assessing source extent using major axis lower bound
[Tue May 21 09:20:46 2013] Source does appear to be extended
[Tue May 21 09:20:46 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.89
[Tue May 21 09:48:08 2013] XMMSAS src. selection expression = ellipse(16139.661420, 25521.654000, 562.099216, 342.628210, 283.506116, X, Y)
[Tue May 21 09:48:08 2013] Writing source region out to fullrun_mos1_xmm0556210401_pi300-10000_pass1_cl_src4_src.reg
[Tue May 21 09:48:08 2013] Extracting stamp from image fullrun_mos1_xmm0556210401_pi300-10000_cl_sm2.00.img.gz, (154, 262) - (218, 326)
[Tue May 21 09:48:08 2013] XMMSAS bgd. selection expression = annulus(16139.661420, 25521.654000, 936.832027, 1873.664054, X, Y) && !ellipse(14888.764400, 23469.573200, 743.800021, 421.117612, 97.729512, X, Y)
[Tue May 21 09:48:08 2013] Writing fullrun_mos1_xmm0556210401_pi300-10000_pass1_cl_src4.gif
[Tue May 21 09:48:35 2013] Mean detx,y = (-6011.31, 7268.98) 
[Tue May 21 09:48:36 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 09:48:57 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 09:48:57 2013] Setting source spectrum file to fullrun_mos1_xmm0556210401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 21 09:48:57 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556210401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue May 21 09:59:20 2013] Not generating rmf since there are only 88 counts
[Tue May 21 09:59:20 2013] rmf not generated due to insufficient counts
[Tue May 21 10:06:15 2013] Updating aperture counts using extracted products
[Tue May 21 10:06:15 2013] Total counts from fullrun_mos1_xmm0556210401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 102.00
[Tue May 21 10:06:16 2013] Total counts from fullrun_mos1_xmm0556210401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 220.00
[Tue May 21 10:06:16 2013] Got source and background scale factors 594004.000000, 6407815.000000
[Tue May 21 10:06:16 2013] User source parameters:
  Position = (186.1, 293.9) = 9 29 20.74 50 49 57.3
  Extent = 9.4 (6.9-11.4)" x 5.7 (3.5-7.7)", rotation angle = 284 (265-304) degrees
  Source aperture counts = 81.6 +/- 11.1
  Background aperture counts = 20.4
  Rate = 0.006 +/- 0.0008

[Tue May 21 10:06:17 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 10:06:17 2013] Using photon index=1.80, rate=0.0065, arf fullrun_mos1_xmm0556210401_pi300-10000_pass1_cl_src4.arf
[Tue May 21 10:06:17 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 10:06:17 2013] Updating source flux to 1.2e-13
[Tue May 21 10:06:21 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 10:06:23 2013] xmm0556210401/analysis//spectral/fullrun_mos1_xmm0556210401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete