[Fri Jul 13 07:24:49 2012] Detection parameters:
  Position = (251.3, 271.9) = 16 34 30.38 33 9 31.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.8 +/- 11.1
  Background counts = 17.3
  Rate = 0.008 +/- 0.002

[Fri Jul 13 07:24:50 2012] Off-axis axis estimate = 3.92'
[Fri Jul 13 07:26:22 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 07:26:22 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Fri Jul 13 07:26:22 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.060
[Fri Jul 13 07:26:22 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 8.39"
[Fri Jul 13 07:54:41 2012] fullrun_pn_xmm0556210301_pi300-10000_cl_pass0_src21.ximg exists
[Fri Jul 13 07:54:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210301_pi300-10000_cl_pass0_src21.csv
[Fri Jul 13 07:54:41 2012] fullrun_pn_xmm0556210301_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Jul 13 07:54:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556210301_pi300-10000_cl_pass0_src21.csv
[Fri Jul 13 07:54:41 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556210301_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556210301_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 07:54:42 2012] fullrun_pn_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Jul 13 07:54:42 2012] fullrun_pn_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Jul 13 07:54:42 2012] Fit fullrun_pn_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri Jul 13 08:49:39 2012] Warning, spatial fit 21 centroid is now closest to src. 24
[Fri Jul 13 08:49:39 2012] Source 23 is offset by -2.543640 and 8.773590 pixels which is larger than
2 X fitted extent = 0.986000 x 0.986000, not incorporating fit results
[Fri Jul 13 08:49:39 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 08:49:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 08:49:39 2012] Assessing source extent using major
[Fri Jul 13 08:49:39 2012] Source does appear to be extended
[Fri Jul 13 08:49:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 08:49:39 2012] Source is confused with source 24
[Fri Jul 13 08:49:54 2012] Using EEF radius (= 8.39 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:49:54 2012] Initial guess for spatial extent in simple fitting = 8.39"
[Fri Jul 13 08:49:54 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.060
[Fri Jul 13 08:49:54 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 8.39"
[Fri Jul 13 09:18:33 2012] fullrun_pn_xmm0556210301_pi300-10000_cl_pass1_src20.ximg exists
[Fri Jul 13 09:18:33 2012] fullrun_pn_xmm0556210301_pi300-10000_cl_pass1_src20_1.ximg exists
[Fri Jul 13 09:18:33 2012] Fit fullrun_pn_xmm0556210301_pi300-10000_cl_pass1_src20 appears to have run properly
[Fri Jul 13 09:18:33 2012] fullrun_pn_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Fri Jul 13 09:18:33 2012] fullrun_pn_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Fri Jul 13 09:18:33 2012] Fit fullrun_pn_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Fri Jul 13 10:21:30 2012] Source 23 is offset by -7.369019 and 6.598969 pixels which is larger than
2 X fitted extent = 0.964175 x 0.964175, not incorporating fit results
[Fri Jul 13 10:21:30 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 10:21:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 10:21:30 2012] Assessing source extent using major
[Fri Jul 13 10:21:30 2012] Source does appear to be extended
[Fri Jul 13 10:21:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 10:21:59 2012] XMMSAS src. selection expression = ellipse(21818.459351, 23605.546295, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 13 10:21:59 2012] Writing source region out to fullrun_pn_xmm0556210301_pi300-10000_pass1_cl_src23_src.reg
[Fri Jul 13 10:21:59 2012] Extracting stamp from image fullrun_pn_xmm0556210301_pi300-10000_cl_sm2.00.img.gz, (214, 234) - (289, 309)
[Fri Jul 13 10:21:59 2012] XMMSAS bgd. selection expression = annulus(21818.459351, 23605.546295, 1087.500000, 2175.000000, X, Y) && !ellipse(21542.435700, 23549.402000, 1804.112052, 1804.112052, 0.000000, X, Y)
[Fri Jul 13 10:21:59 2012] Writing fullrun_pn_xmm0556210301_pi300-10000_pass1_cl_src23.gif
[Fri Jul 13 10:35:08 2012] Mean detx,y = (-4893.11, 4360.56) 
[Fri Jul 13 10:35:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 10:35:26 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 10:35:27 2012] Setting source spectrum file to fullrun_pn_xmm0556210301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jul 13 10:35:27 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556210301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri Jul 13 10:58:40 2012] Not generating rmf since there are only 51 counts
[Fri Jul 13 10:58:40 2012] rmf not generated due to insufficient counts
[Fri Jul 13 11:43:04 2012] Updating aperture counts using extracted products
[Fri Jul 13 11:43:04 2012] Error reading totcts from fullrun_pn_xmm0556210301_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri Jul 13 11:43:05 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 11:43:05 2012] Using photon index=1.80, rate=0.00763, arf fullrun_pn_xmm0556210301_pi300-10000_pass1_cl_src23.arf
[Fri Jul 13 11:43:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 11:43:05 2012] Updating source flux to 2.7e-14
[Fri Jul 13 11:44:15 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting