[Fri Jul 13 07:25:24 2012] Detection parameters:
  Position = (322.5, 298.9) = 16 34 5.74 33 11 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 43.8 +/- 8.4
  Background counts = 5.8
  Rate = 0.004 +/- 0.0007

[Fri Jul 13 07:25:24 2012] Off-axis axis estimate = 1.74'
[Fri Jul 13 08:21:30 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 08:21:30 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Jul 13 08:21:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Fri Jul 13 08:21:30 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.30"
[Fri Jul 13 08:49:33 2012] fullrun_mos2_xmm0556210301_pi300-10000_cl_pass0_src13.ximg exists
[Fri Jul 13 08:49:33 2012] fullrun_mos2_xmm0556210301_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Jul 13 08:49:33 2012] Fit fullrun_mos2_xmm0556210301_pi300-10000_cl_pass0_src13 appears to have run properly
[Fri Jul 13 08:49:34 2012] fullrun_mos2_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Jul 13 08:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Jul 13 08:49:34 2012] fullrun_mos2_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Jul 13 08:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Jul 13 08:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 08:49:46 2012] Spatial fit model total counts = 117.038000, observed total counts = 106.000000
[Fri Jul 13 08:49:46 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 08:49:46 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 08:49:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 08:49:46 2012] Assessing source extent using major
[Fri Jul 13 08:49:46 2012] Source does appear to be extended
[Fri Jul 13 08:49:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 09:46:12 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 09:46:12 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Fri Jul 13 09:46:12 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Fri Jul 13 09:46:12 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 7.30"
[Fri Jul 13 10:21:20 2012] fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_src13.ximg exists
[Fri Jul 13 10:21:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_src13.csv
[Fri Jul 13 10:21:20 2012] fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri Jul 13 10:21:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_src13.csv
[Fri Jul 13 10:21:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 10:21:20 2012] fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri Jul 13 10:21:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jul 13 10:21:20 2012] fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri Jul 13 10:21:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri Jul 13 10:21:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 10:21:45 2012] Spatial fit model total counts = 117.610000, observed total counts = 106.000000
[Fri Jul 13 10:21:45 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 10:21:45 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 10:21:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 10:21:45 2012] Assessing source extent using major
[Fri Jul 13 10:21:45 2012] Source does appear to be extended
[Fri Jul 13 10:21:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 11:28:54 2012] XMMSAS src. selection expression = ellipse(28007.324677, 25959.266937, 652.500000, 652.500000, 0.000000, X, Y)
[Fri Jul 13 11:28:54 2012] Writing source region out to fullrun_mos2_xmm0556210301_pi300-10000_pass1_cl_src13_src.reg
[Fri Jul 13 11:28:54 2012] Extracting stamp from image fullrun_mos2_xmm0556210301_pi300-10000_cl_sm2.00.img.gz, (285, 261) - (360, 336)
[Fri Jul 13 11:28:54 2012] XMMSAS bgd. selection expression = annulus(28007.324677, 25959.266937, 1087.500000, 2175.000000, X, Y) && !ellipse(27246.932251, 27450.214569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30757.265961, 28529.537079, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jul 13 11:28:54 2012] Writing fullrun_mos2_xmm0556210301_pi300-10000_pass1_cl_src13.gif
[Fri Jul 13 11:33:35 2012] Mean detx,y = (-929.70, -1326.67) 
[Fri Jul 13 11:33:37 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 11:33:46 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 11:33:46 2012] Setting source spectrum file to fullrun_mos2_xmm0556210301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jul 13 11:33:46 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556210301_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri Jul 13 11:41:51 2012] Not generating rmf since there are only 43 counts
[Fri Jul 13 11:41:51 2012] rmf not generated due to insufficient counts
[Fri Jul 13 11:43:08 2012] Updating aperture counts using extracted products
[Fri Jul 13 11:43:08 2012] Error reading totcts from fullrun_mos2_xmm0556210301_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri Jul 13 11:43:09 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 11:43:09 2012] Using photon index=1.80, rate=0.00389, arf fullrun_mos2_xmm0556210301_pi300-10000_pass1_cl_src13.arf
[Fri Jul 13 11:43:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 11:43:09 2012] Updating source flux to 4.3e-14
[Fri Jul 13 11:44:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting