[Fri Jul 13 07:25:09 2012] Detection parameters:
  Position = (246.8, 431.7) = 16 34 32.00 33 21 5.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.4 +/- 7.0
  Background counts = 5.0
  Rate = 0.002 +/- 0.0006

[Fri Jul 13 07:25:09 2012] Off-axis axis estimate = 10.36'
[Fri Jul 13 07:54:42 2012] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 07:54:42 2012] Initial guess for spatial extent in simple fitting = 11.61"
[Fri Jul 13 07:54:42 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.896
[Fri Jul 13 07:54:42 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.61"
[Fri Jul 13 08:21:30 2012] fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_src18.ximg exists
[Fri Jul 13 08:21:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_src18.csv
[Fri Jul 13 08:21:30 2012] fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_src18_1.ximg exists
[Fri Jul 13 08:21:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_src18.csv
[Fri Jul 13 08:21:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 08:21:30 2012] fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Fri Jul 13 08:21:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri Jul 13 08:21:30 2012] fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Fri Jul 13 08:21:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src18.csv
[Fri Jul 13 08:21:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556210301_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 08:49:43 2012] Warning, spatial fit 18 centroid is now closest to src. 6
[Fri Jul 13 08:49:43 2012] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.914983 pixels away
[Fri Jul 13 08:49:43 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 08:49:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 08:49:43 2012] Assessing source extent using major
[Fri Jul 13 08:49:43 2012] Source does appear to be extended
[Fri Jul 13 08:49:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 09:18:33 2012] Using EEF radius (= 11.61 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 09:18:33 2012] Initial guess for spatial extent in simple fitting = 11.61"
[Fri Jul 13 09:18:33 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.896
[Fri Jul 13 09:18:33 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 11.61"
[Fri Jul 13 09:46:12 2012] fullrun_mos1_xmm0556210301_pi300-10000_cl_pass1_src17.ximg exists
[Fri Jul 13 09:46:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556210301_pi300-10000_cl_pass1_src17.csv
[Fri Jul 13 09:46:12 2012] fullrun_mos1_xmm0556210301_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Jul 13 09:46:12 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556210301_pi300-10000_cl_pass1_src17.csv
[Fri Jul 13 09:46:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556210301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556210301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 09:46:12 2012] fullrun_mos1_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Jul 13 09:46:12 2012] fullrun_mos1_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Jul 13 09:46:12 2012] Fit fullrun_mos1_xmm0556210301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Fri Jul 13 10:21:39 2012] Spatial fit model total counts = 67.252700, observed total counts = 65.000000
[Fri Jul 13 10:21:39 2012] Offset between fit and detection position for source 4 = 0.499845 pixels
[Fri Jul 13 10:21:39 2012] 66.102500 total counts/ 38.415600 bgd. counts: snr = 4.467047
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.499845 pixels
  Position = (246.9, 432.2) = 16 34 31.95 33 21 7.2
  Extent = 7.4 (5.3-9.8)", rotation angle = 0
  Source counts = 27.7 +/- 8.1
  Background counts = 38.4
  Rate = 0.002 +/- 0.0007
[Fri Jul 13 10:21:39 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 10:21:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 10:21:39 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 10:21:39 2012] Source does appear to be extended
[Fri Jul 13 10:21:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 11:08:04 2012] XMMSAS src. selection expression = ellipse(21435.669400, 37553.788440, 446.257813, 446.257813, 0.000000, X, Y)
[Fri Jul 13 11:08:04 2012] Writing source region out to fullrun_mos1_xmm0556210301_pi300-10000_pass1_cl_src4_src.reg
[Fri Jul 13 11:08:04 2012] Extracting stamp from image fullrun_mos1_xmm0556210301_pi300-10000_cl_sm2.00.img.gz, (221, 407) - (273, 458)
[Fri Jul 13 11:08:04 2012] XMMSAS bgd. selection expression = annulus(21435.669400, 37553.788440, 743.763021, 1487.526043, X, Y) && !ellipse(22681.532379, 37322.295837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22370.050000, 36984.196000, 1236.488036, 1236.488036, 0.000000, X, Y)
[Fri Jul 13 11:08:04 2012] Writing fullrun_mos1_xmm0556210301_pi300-10000_pass1_cl_src4.gif
[Fri Jul 13 11:12:47 2012] Mean detx,y = (9522.00, -7406.72) 
[Fri Jul 13 11:12:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jul 13 11:13:01 2012] Binned source spectrum to 10 counts/bin
[Fri Jul 13 11:13:01 2012] Setting source spectrum file to fullrun_mos1_xmm0556210301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 13 11:13:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0556210301_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jul 13 11:28:23 2012] Not generating rmf since there are only 27 counts
[Fri Jul 13 11:28:23 2012] rmf not generated due to insufficient counts
[Fri Jul 13 11:43:06 2012] Updating aperture counts using extracted products
[Fri Jul 13 11:43:06 2012] Error reading totcts from fullrun_mos1_xmm0556210301_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jul 13 11:43:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jul 13 11:43:07 2012] Using photon index=1.80, rate=0.00227, arf fullrun_mos1_xmm0556210301_pi300-10000_pass1_cl_src4.arf
[Fri Jul 13 11:43:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jul 13 11:43:07 2012] Updating source flux to 5.5e-14
[Fri Jul 13 11:43:10 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting