[Sun May  6 11:16:39 2012] Detection parameters:
  Position = (399.2, 335.8) = 9 9 28.17 -9 39 31.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 882.1 +/- 51.9
  Background counts = 936.0
  Rate = 0.02 +/- 0.001

[Sun May  6 11:16:58 2012] Off-axis axis estimate = 7.79'
[Sun May  6 11:29:19 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Sun May  6 11:29:19 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Sun May  6 11:29:19 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.908
[Sun May  6 11:29:19 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.33"
[Mon May  7 10:04:15 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_src15.ximg exists
[Mon May  7 10:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_src15.csv
[Mon May  7 10:04:15 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_src15_1.ximg exists
[Mon May  7 10:04:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_src15.csv
[Mon May  7 10:04:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May  7 10:04:19 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Mon May  7 10:04:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon May  7 10:04:19 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Mon May  7 10:04:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Mon May  7 10:04:19 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 16:26:16 2012] Warning, spatial fit 15 centroid is now closest to src. 23
[Tue May  8 16:26:17 2012] Vigneting correction estimate = 1.000000
[Tue May  8 16:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 16:26:17 2012] Assessing source extent using major
[Tue May  8 16:26:17 2012] Source does appear to be extended
[Tue May  8 16:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 16:26:17 2012] Source is confused with source 15
[Tue May  8 16:28:22 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Tue May  8 16:28:22 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Tue May  8 16:28:22 2012] source mask rpix=2.4, npix_max = 33, mask sum = 30, frac = 0.908
[Tue May  8 16:28:22 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 10.33"
[Wed May  9 14:19:25 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src13.ximg exists
[Wed May  9 14:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src13.csv
[Wed May  9 14:19:25 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed May  9 14:19:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src13.csv
[Wed May  9 14:19:25 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 14:19:29 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed May  9 14:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May  9 14:19:29 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed May  9 14:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed May  9 14:19:29 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 22:00:28 2012] Warning, spatial fit 13 centroid is now closest to src. 20
[Thu May 10 22:00:29 2012] Vigneting correction estimate = 1.000000
[Thu May 10 22:00:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 22:00:29 2012] Assessing source extent using major
[Thu May 10 22:00:29 2012] Source does appear to be extended
[Thu May 10 22:00:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 22:01:56 2012] XMMSAS src. selection expression = ellipse(34685.448181, 29165.520142, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 10 22:01:56 2012] Writing source region out to fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src16_src.reg
[Thu May 10 22:01:56 2012] Extracting stamp from image fullrun_pn_xmm0556200501_pi300-10000_cl_sm2.00.img.gz, (362, 298) - (437, 373)
[Thu May 10 22:01:56 2012] XMMSAS bgd. selection expression = annulus(34685.448181, 29165.520142, 1087.500000, 2175.000000, X, Y) && !ellipse(32176.503906, 31560.922089, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32536.305511, 31030.930450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.958130, 29856.146362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35318.042000, 30187.746000, 1710.472049, 1710.472049, 0.000000, X, Y) && !ellipse(35725.521393, 28749.862030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36944.812000, 27775.266000, 1759.616051, 1759.616051, 0.000000, X, Y) && !ellipse(35901.815338, 28317.445374, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34006.702000, 28396.218000, 1565.200045, 300.182409, 330.751700, X, Y) && !ellipse(36168.066986, 27969.222351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34921.708618, 28131.200378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34667.856000, 27741.892000, 1561.400045, 1561.400045, 0.000000, X, Y) && !ellipse(33715.212860, 27905.135254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37208.214539, 27352.854645, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35183.406891, 27450.785400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36571.695160, 27355.451263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34491.065521, 27426.258240, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37506.246000, 27191.684000, 11128.224320, 11128.224320, 0.000000, X, Y) && !ellipse(38655.836000, 26748.055000, 1854.704053, 1854.704053, 0.000000, X, Y) && !ellipse(36443.563446, 26936.004425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34704.192688, 26914.559753, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37103.651520, 26924.255920, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35305.572754, 26854.277313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36769.993988, 26494.719971, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33947.681915, 27365.904114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31923.992035, 26624.994293, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34968.764000, 26180.880000, 1581.744046, 1581.744046, 0.000000, X, Y) && !ellipse(32528.130676, 26160.393372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32876.126000, 25778.701400, 1533.960044, 1533.960044, 0.000000, X, Y) && !ellipse(31314.166600, 30210.768000, 1462.784042, 1396.336040, 359.981000, X, Y) && !ellipse(32502.536194, 29884.677307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32117.859619, 29349.513672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33556.272186, 29072.389679, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32451.404600, 29118.658600, 1517.912044, 1517.912044, 0.000000, X, Y) && !ellipse(32289.770111, 28599.077606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32679.292114, 27427.941528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33811.352000, 26788.020000, 4827.240139, 4827.240139, 0.000000, X, Y) && !ellipse(32513.384400, 26995.102000, 1490.624043, 1490.624043, 0.000000, X, Y)
[Thu May 10 22:01:56 2012] Writing fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src16.gif
[Thu May 10 22:45:05 2012] Mean detx,y = (8265.40, 1776.14) 
[Thu May 10 22:45:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu May 10 22:47:42 2012] Binned source spectrum to 10 counts/bin
[Thu May 10 22:47:43 2012] Setting source spectrum file to fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Thu May 10 22:47:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Fri May 11 03:13:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 11 03:13:10 2012] rmf not generated due to insufficient counts
[Fri May 11 17:14:56 2012] Updating aperture counts using extracted products
[Fri May 11 17:14:56 2012] Error reading totcts from fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Fri May 11 17:15:04 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 11 17:15:04 2012] Using photon index=1.80, rate=0.0199, arf fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src16.arf
[Fri May 11 17:15:04 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 11 17:15:04 2012] Updating source flux to 1.5e-13
[Fri May 11 17:31:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting