[Sun May  6 11:16:54 2012] Detection parameters:
  Position = (303.1, 325.3) = 9 9 56.44 -9 40 17.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 241.8 +/- 24.6
  Background counts = 142.7
  Rate = 0.004 +/- 0.0004

[Sun May  6 11:16:58 2012] Off-axis axis estimate = 1.98'
[Sun May  6 11:29:19 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sun May  6 11:29:19 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Sun May  6 11:29:19 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.028
[Sun May  6 11:29:19 2012] Giving source the simple spatial ID 111 for pass 0, mean size = 7.42"
[Tue May  8 16:26:17 2012] Vigneting correction estimate = 1.000000
[Tue May  8 16:26:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 16:26:17 2012] Assessing source extent using major
[Tue May  8 16:26:17 2012] Source does appear to be extended
[Tue May  8 16:26:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 16:28:22 2012] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Tue May  8 16:28:22 2012] Initial guess for spatial extent in simple fitting = 7.42"
[Tue May  8 16:28:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.028
[Tue May  8 16:28:22 2012] Giving source the simple spatial ID 80 for pass 1, mean size = 7.42"
[Wed May  9 14:19:28 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src80.ximg exists
[Wed May  9 14:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src80.csv
[Wed May  9 14:19:28 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src80_1.ximg exists
[Wed May  9 14:19:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src80.csv
[Wed May  9 14:19:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  9 14:19:31 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src80.ximg exists
[Wed May  9 14:19:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src80.csv
[Wed May  9 14:19:31 2012] fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src80_1.ximg exists
[Wed May  9 14:19:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src80.csv
[Wed May  9 14:19:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src80_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src80.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 22:00:29 2012] Spatial fit model total counts = 1348.530000, observed total counts = 1201.000000
[Thu May 10 22:00:29 2012] Poor agreement between spatial fit and data for source 118
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May 10 22:00:29 2012] Vigneting correction estimate = 1.000000
[Thu May 10 22:00:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 22:00:29 2012] Assessing source extent using major
[Thu May 10 22:00:29 2012] Source does appear to be extended
[Thu May 10 22:00:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 22:02:06 2012] XMMSAS src. selection expression = ellipse(26324.559143, 28255.423889, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 10 22:02:06 2012] Writing source region out to fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src118_src.reg
[Thu May 10 22:02:06 2012] Extracting stamp from image fullrun_pn_xmm0556200501_pi300-10000_cl_sm2.00.img.gz, (266, 288) - (341, 363)
[Thu May 10 22:02:06 2012] XMMSAS bgd. selection expression = annulus(26324.559143, 28255.423889, 1087.500000, 2175.000000, X, Y) && !ellipse(37506.246000, 27191.684000, 11128.224320, 11128.224320, 0.000000, X, Y)
[Thu May 10 22:02:06 2012] Writing fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src118.gif
[Fri May 11 02:19:01 2012] Mean detx,y = (194.37, -479.21) 
[Fri May 11 02:19:08 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 02:19:48 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 02:19:48 2012] Setting source spectrum file to fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src118_src_b10.pi.gz
[Fri May 11 02:19:48 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src118_bgd.pi.gz
[Fri May 11 05:21:44 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 11 05:21:44 2012] rmf not generated due to insufficient counts
[Fri May 11 17:15:02 2012] Updating aperture counts using extracted products
[Fri May 11 17:15:02 2012] Error reading totcts from fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src118_src_b10.pi.gz
[Fri May 11 17:15:07 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 11 17:15:07 2012] Using photon index=1.80, rate=0.00356, arf fullrun_pn_xmm0556200501_pi300-10000_pass1_cl_src118.arf
[Fri May 11 17:15:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 11 17:15:07 2012] Updating source flux to 1.2e-14
[Fri May 11 17:31:56 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting