[Sun May  6 11:17:16 2012] Detection parameters:
  Position = (465.7, 404.9) = 9 9 8.63 -9 34 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.9 +/- 22.0
  Background counts = 122.9
  Rate = 0.001 +/- 0.0002

[Sun May  6 11:17:22 2012] Off-axis axis estimate = 14.37'
[Mon May  7 20:34:30 2012] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Mon May  7 20:34:30 2012] Initial guess for spatial extent in simple fitting = 13.62"
[Mon May  7 20:34:30 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.062
[Mon May  7 20:34:30 2012] Giving source the simple spatial ID 77 for pass 0, mean size = 13.62"
[Tue May  8 16:25:21 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src77.ximg exists
[Tue May  8 16:25:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src77.csv
[Tue May  8 16:25:21 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src77_1.ximg exists
[Tue May  8 16:25:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src77.csv
[Tue May  8 16:25:21 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src77_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src77.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 16:25:23 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src77.ximg exists
[Tue May  8 16:25:23 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src77_1.ximg exists
[Tue May  8 16:25:23 2012] Fit fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src77 appears to have run properly
[Tue May  8 16:27:30 2012] Warning: source 77 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 18.296950 pixels away
[Tue May  8 16:27:30 2012] Vigneting correction estimate = 1.000000
[Tue May  8 16:27:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 16:27:30 2012] Assessing source extent using major
[Tue May  8 16:27:30 2012] Source does appear to be extended
[Tue May  8 16:27:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 16:27:31 2012] Source is confused with source 57
[Thu May 10 08:39:08 2012] Using EEF radius (= 13.62 ")to estimate initial spatial extent for simple fitting
[Thu May 10 08:39:08 2012] Initial guess for spatial extent in simple fitting = 13.62"
[Thu May 10 08:39:08 2012] source mask rpix=3.1, npix_max = 52, mask sum = 56, frac = 1.062
[Thu May 10 08:39:08 2012] Giving source the simple spatial ID 67 for pass 1, mean size = 13.62"
[Thu May 10 21:59:40 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src67.ximg exists
[Thu May 10 21:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src67.csv
[Thu May 10 21:59:40 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src67_1.ximg exists
[Thu May 10 21:59:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src67.csv
[Thu May 10 21:59:40 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src67_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src67.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 21:59:43 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src67.ximg exists
[Thu May 10 21:59:43 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src67_1.ximg exists
[Thu May 10 21:59:43 2012] Fit fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src67 appears to have run properly
[Thu May 10 22:01:21 2012] Warning: source 67 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 13.510803 pixels away
[Thu May 10 22:01:21 2012] Spatial fit model total counts = 10947.000000, observed total counts = 10313.000000
[Thu May 10 22:01:21 2012] Offset between fit and detection position for source 53 = 5.378518 pixels
[Thu May 10 22:01:21 2012] Warning, changing simple spatial fit ID from 67 to 70
[Thu May 10 22:01:21 2012] 10667.984000 total counts/ 10234.900000 bgd. counts: snr = 4.280853
Spatial fit parameters:
  Offset between fit and detection position for source 53 = 5.378518 pixels
  Position = (466.5, 410.2) = 9 9 8.40 -9 34 9.6
  Extent = 35.6 (20.4-55.0)", rotation angle = 0
  Source counts = 433.1 +/- 103.3
  Background counts = 10234.9
  Rate = 0.005 +/- 0.001
[Thu May 10 22:01:21 2012] Vigneting correction estimate = 1.000000
[Thu May 10 22:01:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 22:01:21 2012] Assessing source extent using major axis lower bound
[Thu May 10 22:01:21 2012] Source does appear to be extended
[Thu May 10 22:01:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 09:00:19 2012] XMMSAS src. selection expression = ellipse(40534.806000, 35638.356000, 2134.716061, 2134.716061, 0.000000, X, Y)
[Fri May 11 09:00:19 2012] Writing source region out to fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src53_src.reg
[Fri May 11 09:00:19 2012] Extracting stamp from image fullrun_mos2_xmm0556200501_pi300-10000_cl_sm2.00.img.gz, (344, 288) - (589, 533)
[Fri May 11 09:00:19 2012] XMMSAS bgd. selection expression = annulus(40534.806000, 35638.356000, 3557.860102, 7115.720205, X, Y) && !ellipse(37821.288000, 27159.026000, 1858.416053, 1858.416053, 0.000000, X, Y) && !ellipse(37535.482000, 27684.582000, 1791.160052, 1791.160052, 0.000000, X, Y) && !ellipse(35526.078000, 28717.976000, 3543.536102, 3543.536102, 0.000000, X, Y) && !ellipse(35768.766000, 29667.326000, 2830.048081, 2830.048081, 0.000000, X, Y) && !ellipse(37013.138000, 27569.576000, 10947.216315, 10947.216315, 0.000000, X, Y) && !ellipse(35580.052000, 29181.054000, 3425.136099, 3425.136099, 0.000000, X, Y) && !ellipse(37100.950000, 28135.986000, 3514.672101, 3514.672101, 0.000000, X, Y) && !ellipse(35321.323931, 28325.508719, 2974.639003, 2490.875003, 357.520200, X, Y) && !ellipse(36457.930000, 29090.130000, 1757.336051, 1757.336051, 0.000000, X, Y) && !ellipse(38931.598000, 26782.516000, 3997.904115, 3997.904115, 0.000000, X, Y) && !ellipse(34506.090000, 29210.317400, 1192.912034, 1192.912034, 0.000000, X, Y) && !ellipse(34963.542000, 29512.106000, 1698.176049, 1698.176049, 0.000000, X, Y) && !ellipse(35220.462400, 30004.806000, 1712.568049, 1712.568049, 0.000000, X, Y) && !ellipse(34027.048706, 37641.759583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38227.026276, 28805.447723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42303.796000, 26556.796000, 2054.592059, 2054.592059, 0.000000, X, Y) && !ellipse(40475.170000, 28127.190000, 1998.952058, 1998.952058, 0.000000, X, Y) && !ellipse(41710.584015, 34772.129578, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40886.068000, 33746.959360, 2198.376063, 2198.376063, 0.000000, X, Y)
[Fri May 11 09:00:19 2012] Writing fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src53.gif
[Fri May 11 12:31:54 2012] Mean detx,y = (-15493.73, 1833.21) 
[Fri May 11 12:31:57 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 12:33:53 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 12:33:53 2012] Setting source spectrum file to fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Fri May 11 12:33:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Fri May 11 17:15:18 2012] Updating aperture counts using extracted products
[Fri May 11 17:15:18 2012] Error reading totcts from fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Fri May 11 17:15:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 11 17:15:21 2012] Using photon index=1.80, rate=0.00496, arf fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src53.arf
[Fri May 11 17:15:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 11 17:15:21 2012] Updating source flux to 1.3e-13
[Fri May 11 17:21:45 2012] Flag c found in src. 53 procflags, skipping spectral fitting