[Sun May  6 11:17:15 2012] Detection parameters:
  Position = (477.9, 271.0) = 9 9 5.00 -9 44 19.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.4 +/- 25.7
  Background counts = 128.0
  Rate = 0.002 +/- 0.0003

[Sun May  6 11:17:22 2012] Off-axis axis estimate = 13.17'
[Mon May  7 20:34:30 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Mon May  7 20:34:30 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Mon May  7 20:34:30 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Mon May  7 20:34:30 2012] Giving source the simple spatial ID 57 for pass 0, mean size = 13.01"
[Tue May  8 16:25:20 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src57.ximg exists
[Tue May  8 16:25:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src57.csv
[Tue May  8 16:25:20 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src57_1.ximg exists
[Tue May  8 16:25:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src57.csv
[Tue May  8 16:25:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 16:25:23 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src57.ximg exists
[Tue May  8 16:25:23 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src57_1.ximg exists
[Tue May  8 16:25:23 2012] Fit fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src57 appears to have run properly
[Tue May  8 16:27:30 2012] Warning, spatial fit 57 centroid is now closest to src. 43
[Tue May  8 16:27:30 2012] Source 46 is offset by -7.880126 and -1.404689 pixels which is larger than
2 X fitted extent = 1.525255 x 1.525255, not incorporating fit results
[Tue May  8 16:27:30 2012] Warning: source 78 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 46 at 11.169708 pixels away
[Tue May  8 16:27:30 2012] Vigneting correction estimate = 1.000000
[Tue May  8 16:27:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 16:27:30 2012] Assessing source extent using major
[Tue May  8 16:27:30 2012] Source does appear to be extended
[Tue May  8 16:27:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May  8 16:27:31 2012] Source is confused with source 47
[Thu May 10 08:39:08 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Thu May 10 08:39:08 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Thu May 10 08:39:08 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Thu May 10 08:39:08 2012] Giving source the simple spatial ID 51 for pass 1, mean size = 13.01"
[Thu May 10 21:59:39 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src51.ximg exists
[Thu May 10 21:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src51.csv
[Thu May 10 21:59:39 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src51_1.ximg exists
[Thu May 10 21:59:39 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src51.csv
[Thu May 10 21:59:39 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 21:59:42 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src51.ximg exists
[Thu May 10 21:59:42 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src51_1.ximg exists
[Thu May 10 21:59:42 2012] Fit fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src51 appears to have run properly
[Thu May 10 22:01:21 2012] Warning, spatial fit 51 centroid is now closest to src. 77
[Thu May 10 22:01:21 2012] Source 46 is offset by -2.522034 and -5.424643 pixels which is larger than
2 X fitted extent = 1.488584 x 1.488584, not incorporating fit results
[Thu May 10 22:01:21 2012] Vigneting correction estimate = 1.000000
[Thu May 10 22:01:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 22:01:21 2012] Assessing source extent using major
[Thu May 10 22:01:21 2012] Source does appear to be extended
[Thu May 10 22:01:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 11 09:00:18 2012] XMMSAS src. selection expression = ellipse(41532.551025, 23527.422058, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 11 09:00:18 2012] Writing source region out to fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src46_src.reg
[Fri May 11 09:00:18 2012] Extracting stamp from image fullrun_mos2_xmm0556200501_pi300-10000_cl_sm2.00.img.gz, (440, 233) - (515, 308)
[Fri May 11 09:00:18 2012] XMMSAS bgd. selection expression = annulus(41532.551025, 23527.422058, 1087.500000, 2175.000000, X, Y) && !ellipse(37821.288000, 27159.026000, 1858.416053, 1858.416053, 0.000000, X, Y) && !ellipse(37013.138000, 27569.576000, 10947.216315, 10947.216315, 0.000000, X, Y) && !ellipse(37100.950000, 28135.986000, 3514.672101, 3514.672101, 0.000000, X, Y) && !ellipse(38966.042000, 26083.783800, 1211.560035, 1211.560035, 0.000000, X, Y) && !ellipse(38931.598000, 26782.516000, 3997.904115, 3997.904115, 0.000000, X, Y) && !ellipse(42303.796000, 26556.796000, 2054.592059, 2054.592059, 0.000000, X, Y) && !ellipse(39984.394000, 26416.042000, 1846.296053, 1846.296053, 0.000000, X, Y) && !ellipse(40374.966217, 25686.008667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41298.250000, 25432.923309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41032.330231, 25997.201996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38875.518000, 25362.120000, 2800.960081, 2800.960081, 0.000000, X, Y) && !ellipse(39980.080000, 24348.064000, 2005.376058, 2005.376058, 0.000000, X, Y) && !ellipse(41950.300000, 23233.682000, 2149.088062, 1210.696035, 237.228000, X, Y) && !ellipse(40658.013580, 24922.894836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40238.932000, 23286.053800, 2051.128059, 2051.128059, 0.000000, X, Y) && !ellipse(42372.540660, 22002.453400, 1420.904041, 1420.904041, 0.000000, X, Y)
[Fri May 11 09:00:18 2012] Writing fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src46.gif
[Fri May 11 12:25:16 2012] Mean detx,y = (-12461.23, -9531.35) 
[Fri May 11 12:25:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 12:26:10 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 12:26:11 2012] Setting source spectrum file to fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri May 11 12:26:11 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Fri May 11 16:38:55 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May 11 16:38:55 2012] rmf not generated due to insufficient counts
[Fri May 11 17:15:17 2012] Updating aperture counts using extracted products
[Fri May 11 17:15:17 2012] Error reading totcts from fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Fri May 11 17:15:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 11 17:15:20 2012] Using photon index=1.80, rate=0.002, arf fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src46.arf
[Fri May 11 17:15:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 11 17:15:20 2012] Updating source flux to 5.8e-14
[Fri May 11 17:21:45 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting