[Sun May  6 11:17:15 2012] Detection parameters:
  Position = (440.0, 287.3) = 9 9 16.18 -9 42 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.9 +/- 25.0
  Background counts = 424.6
  Rate = 0.002 +/- 0.0003

[Sun May  6 11:17:22 2012] Off-axis axis estimate = 10.29'
[Mon May  7 20:34:30 2012] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Mon May  7 20:34:30 2012] Initial guess for spatial extent in simple fitting = 11.58"
[Mon May  7 20:34:30 2012] source mask rpix=2.7, npix_max = 39, mask sum = 33, frac = 0.826
[Mon May  7 20:34:30 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 11.58"
[Tue May  8 16:25:20 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src50.ximg exists
[Tue May  8 16:25:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src50.csv
[Tue May  8 16:25:20 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src50_1.ximg exists
[Tue May  8 16:25:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src50.csv
[Tue May  8 16:25:20 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 16:25:22 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Tue May  8 16:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Tue May  8 16:25:22 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Tue May  8 16:25:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src50.csv
[Tue May  8 16:25:22 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200501_pi300-10000_cl_pass0_tfrozen_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May  8 16:27:30 2012] Source 42 is offset by -2.391981 and -7.088918 pixels which is larger than
2 X fitted extent = 1.299724 x 1.299724, not incorporating fit results
[Tue May  8 16:27:30 2012] Warning, spatial fit 50 centroid is now closest to src. 78
[Tue May  8 16:27:30 2012] Vigneting correction estimate = 1.000000
[Tue May  8 16:27:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May  8 16:27:30 2012] Assessing source extent using major
[Tue May  8 16:27:30 2012] Source does appear to be extended
[Tue May  8 16:27:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 08:39:08 2012] Using EEF radius (= 11.58 ")to estimate initial spatial extent for simple fitting
[Thu May 10 08:39:08 2012] Initial guess for spatial extent in simple fitting = 11.58"
[Thu May 10 08:39:08 2012] source mask rpix=2.7, npix_max = 39, mask sum = 33, frac = 0.826
[Thu May 10 08:39:08 2012] Giving source the simple spatial ID 46 for pass 1, mean size = 11.58"
[Thu May 10 21:59:38 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src46.ximg exists
[Thu May 10 21:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src46.csv
[Thu May 10 21:59:38 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src46_1.ximg exists
[Thu May 10 21:59:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src46.csv
[Thu May 10 21:59:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 21:59:41 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src46.ximg exists
[Thu May 10 21:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src46.csv
[Thu May 10 21:59:41 2012] fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src46_1.ximg exists
[Thu May 10 21:59:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src46.csv
[Thu May 10 21:59:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200501_pi300-10000_cl_pass1_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 10 22:01:21 2012] Warning, spatial fit 46 centroid is now closest to src. 1
[Thu May 10 22:01:21 2012] Spatial fit model total counts = 12259.600000, observed total counts = 12240.000000
[Thu May 10 22:01:21 2012] Offset between fit and detection position for source 42 = 8.843460 pixels
[Thu May 10 22:01:21 2012] Warning, changing simple spatial fit ID from 46 to 58
[Thu May 10 22:01:21 2012] 12244.119000 total counts/ 11650.300000 bgd. counts: snr = 5.501556
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 8.843460 pixels
  Position = (447.4, 292.1) = 9 9 13.99 -9 42 43.5
  Extent = 35.0 (26.7-42.4)", rotation angle = 0
  Source counts = 593.8 +/- 110.7
  Background counts = 11650.3
  Rate = 0.007 +/- 0.001
[Thu May 10 22:01:21 2012] Vigneting correction estimate = 1.000000
[Thu May 10 22:01:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 10 22:01:21 2012] Assessing source extent using major axis lower bound
[Thu May 10 22:01:21 2012] Source does appear to be extended
[Thu May 10 22:01:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 10 22:01:21 2012] Source is confused with source 44
[Fri May 11 09:00:18 2012] XMMSAS src. selection expression = ellipse(38875.518000, 25362.120000, 2100.720060, 2100.720060, 0.000000, X, Y)
[Fri May 11 09:00:18 2012] Writing source region out to fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src42_src.reg
[Fri May 11 09:00:18 2012] Extracting stamp from image fullrun_mos2_xmm0556200501_pi300-10000_cl_sm2.00.img.gz, (327, 171) - (568, 413)
[Fri May 11 09:00:18 2012] XMMSAS bgd. selection expression = annulus(38875.518000, 25362.120000, 3501.200101, 7002.400201, X, Y) && !ellipse(38918.050000, 24905.248000, 369.124011, 369.124011, 0.000000, X, Y) && !ellipse(37383.411957, 27269.396454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37821.288000, 27159.026000, 1858.416053, 1858.416053, 0.000000, X, Y) && !ellipse(37292.774567, 26751.453339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37535.482000, 27684.582000, 1791.160052, 1791.160052, 0.000000, X, Y) && !ellipse(35797.021332, 22857.887390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38358.386000, 27125.962000, 945.088027, 945.088027, 0.000000, X, Y) && !ellipse(36574.583832, 27094.552155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35526.078000, 28717.976000, 3543.536102, 3543.536102, 0.000000, X, Y) && !ellipse(35768.766000, 29667.326000, 2830.048081, 2830.048081, 0.000000, X, Y) && !ellipse(37013.138000, 27569.576000, 10947.216315, 10947.216315, 0.000000, X, Y) && !ellipse(37826.610687, 26751.437408, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38335.096588, 26751.580780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35580.052000, 29181.054000, 3425.136099, 3425.136099, 0.000000, X, Y) && !ellipse(37100.950000, 28135.986000, 3514.672101, 3514.672101, 0.000000, X, Y) && !ellipse(35321.323931, 28325.508719, 2974.639003, 2490.875003, 357.520200, X, Y) && !ellipse(38966.042000, 26083.783800, 1211.560035, 1211.560035, 0.000000, X, Y) && !ellipse(36457.930000, 29090.130000, 1757.336051, 1757.336051, 0.000000, X, Y) && !ellipse(39438.234800, 27090.866800, 1028.072030, 1028.072030, 0.000000, X, Y) && !ellipse(38931.598000, 26782.516000, 3997.904115, 3997.904115, 0.000000, X, Y) && !ellipse(37616.032349, 24637.853546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37551.408936, 25804.199951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34506.090000, 29210.317400, 1192.912034, 1192.912034, 0.000000, X, Y) && !ellipse(34963.542000, 29512.106000, 1698.176049, 1698.176049, 0.000000, X, Y) && !ellipse(35753.741699, 27020.224609, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33679.154000, 18609.289400, 432.196012, 432.196012, 0.000000, X, Y) && !ellipse(36907.936035, 25613.635223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35220.462400, 30004.806000, 1712.568049, 1712.568049, 0.000000, X, Y) && !ellipse(35246.806335, 26838.206421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34620.992035, 24241.154999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38227.026276, 28805.447723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(42303.796000, 26556.796000, 2054.592059, 2054.592059, 0.000000, X, Y) && !ellipse(39984.394000, 26416.042000, 1846.296053, 1846.296053, 0.000000, X, Y) && !ellipse(40374.966217, 25686.008667, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41298.250000, 25432.923309, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41032.330231, 25997.201996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40971.384033, 26832.447662, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34876.740387, 22007.356720, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39980.080000, 24348.064000, 2005.376058, 2005.376058, 0.000000, X, Y) && !ellipse(41950.300000, 23233.682000, 2149.088062, 1210.696035, 237.228000, X, Y) && !ellipse(41532.551025, 23527.422058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40423.285095, 27095.011475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40475.170000, 28127.190000, 1998.952058, 1998.952058, 0.000000, X, Y) && !ellipse(40658.013580, 24922.894836, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40238.932000, 23286.053800, 2051.128059, 2051.128059, 0.000000, X, Y) && !ellipse(42372.540660, 22002.453400, 1420.904041, 1420.904041, 0.000000, X, Y) && !ellipse(40886.068000, 33746.959360, 2198.376063, 2198.376063, 0.000000, X, Y)
[Fri May 11 09:00:18 2012] Writing fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src42.gif
[Fri May 11 12:19:16 2012] Mean detx,y = (-10639.19, -6529.23) 
[Fri May 11 12:19:18 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 11 12:20:18 2012] Binned source spectrum to 10 counts/bin
[Fri May 11 12:20:19 2012] Setting source spectrum file to fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Fri May 11 12:20:19 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Fri May 11 17:15:17 2012] Updating aperture counts using extracted products
[Fri May 11 17:15:17 2012] Error reading totcts from fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Fri May 11 17:15:20 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 11 17:15:20 2012] Using photon index=1.80, rate=0.0068, arf fullrun_mos2_xmm0556200501_pi300-10000_pass1_cl_src42.arf
[Fri May 11 17:15:20 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 11 17:15:20 2012] Updating source flux to 1.4e-13
[Fri May 11 17:21:45 2012] Flag b found in src. 42 procflags, skipping spectral fitting
[Fri May 11 17:21:45 2012] Flag c found in src. 42 procflags, skipping spectral fitting