[Sun Jan  1 10:39:44 2012] Detection parameters:
  Position = (135.0, 416.2) = 9 11 30.40 -9 33 44.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 212.0 +/- 20.0
  Background counts = 47.4
  Rate = 0.005 +/- 0.0005

[Sun Jan  1 10:39:47 2012] Off-axis axis estimate = 14.60'
[Sun Jan  1 10:44:30 2012] Using EEF radius (= 13.73 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 10:44:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jan  1 10:44:30 2012] Initial guess for spatial extent in simple fitting = 13.73"
[Sun Jan  1 10:44:30 2012] source mask rpix=3.2, npix_max = 53, mask sum = 42, frac = 0.786
[Sun Jan  1 10:44:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 13.73"
[Sun Jan  1 12:16:21 2012] fullrun_pn_xmm0556200301_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jan  1 12:16:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200301_pi300-10000_cl_pass0_src1.csv
[Sun Jan  1 12:16:21 2012] fullrun_pn_xmm0556200301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jan  1 12:16:21 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200301_pi300-10000_cl_pass0_src1.csv
[Sun Jan  1 12:16:21 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 12:16:22 2012] fullrun_pn_xmm0556200301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jan  1 12:16:22 2012] fullrun_pn_xmm0556200301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jan  1 12:16:22 2012] Fit fullrun_pn_xmm0556200301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jan  1 13:46:59 2012] Spatial fit model total counts = 1011.970000, observed total counts = 1012.000000
[Sun Jan  1 13:46:59 2012] Offset between fit and detection position for source 1 = 0.190692 pixels
[Sun Jan  1 13:46:59 2012] 1014.630000 total counts/ 913.381000 bgd. counts: snr = 3.350154
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.190692 pixels
  Position = (135.2, 416.1) = 9 11 30.35 -9 33 45.8
  Extent = 4.6 (3.8-6.1)", rotation angle = 0
  Source counts = 101.2 +/- 31.9
  Background counts = 913.4
  Rate = 0.003 +/- 0.001
[Sun Jan  1 13:46:59 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 13:46:59 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 13:46:59 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 13:46:59 2012] Source does appear to be extended
[Sun Jan  1 13:46:59 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 13:47:24 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 13:47:24 2012] Initial guess for spatial extent in simple fitting = 4.62"
[Sun Jan  1 13:47:24 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.922
[Sun Jan  1 13:47:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 4.62"
[Sun Jan  1 15:05:44 2012] fullrun_pn_xmm0556200301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jan  1 15:05:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200301_pi300-10000_cl_pass1_src1.csv
[Sun Jan  1 15:05:44 2012] fullrun_pn_xmm0556200301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jan  1 15:05:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200301_pi300-10000_cl_pass1_src1.csv
[Sun Jan  1 15:05:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 15:05:44 2012] fullrun_pn_xmm0556200301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jan  1 15:05:44 2012] fullrun_pn_xmm0556200301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jan  1 15:05:44 2012] Fit fullrun_pn_xmm0556200301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jan  1 16:12:26 2012] Spatial fit model total counts = 468.820000, observed total counts = 469.000000
[Sun Jan  1 16:12:26 2012] Offset between fit and detection position for source 1 = 0.041996 pixels
[Sun Jan  1 16:12:26 2012] 474.121000 total counts/ 372.369000 bgd. counts: snr = 5.272981
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.041996 pixels
  Position = (135.2, 416.1) = 9 11 30.34 -9 33 45.9
  Extent = 4.7 (3.8-5.9)", rotation angle = 0
  Source counts = 101.8 +/- 21.8
  Background counts = 372.4
  Rate = 0.003 +/- 0.0006
[Sun Jan  1 16:12:26 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 16:12:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 16:12:26 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 16:12:26 2012] Source does appear to be extended
[Sun Jan  1 16:12:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 16:12:52 2012] XMMSAS src. selection expression = ellipse(11717.441800, 36150.441600, 279.031808, 279.031808, 0.000000, X, Y)
[Sun Jan  1 16:12:52 2012] Writing source region out to fullrun_pn_xmm0556200301_pi300-10000_pass1_cl_src1_src.reg
[Sun Jan  1 16:12:52 2012] Extracting stamp from image fullrun_pn_xmm0556200301_pi300-10000_cl_sm2.00.img.gz, (119, 400) - (151, 432)
[Sun Jan  1 16:12:52 2012] XMMSAS bgd. selection expression = annulus(11717.441800, 36150.441600, 465.053013, 930.106027, X, Y)
[Sun Jan  1 16:12:52 2012] Writing fullrun_pn_xmm0556200301_pi300-10000_pass1_cl_src1.gif
[Sun Jan  1 16:13:08 2012] Mean detx,y = (-10405.46, -13321.87) 
[Sun Jan  1 16:13:13 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 16:13:35 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 16:13:35 2012] Setting source spectrum file to fullrun_pn_xmm0556200301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jan  1 16:13:35 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556200301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jan  1 18:19:31 2012] Updating aperture counts using extracted products
[Sun Jan  1 18:19:31 2012] Error reading totcts from fullrun_pn_xmm0556200301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jan  1 18:19:33 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 18:19:33 2012] Using photon index=1.80, rate=0.00304, arf fullrun_pn_xmm0556200301_pi300-10000_pass1_cl_src1.arf
[Sun Jan  1 18:19:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 18:19:33 2012] Updating source flux to 5.5e-14
[Sun Jan  1 18:24:06 2012] Reading fit data from xmm0556200301/analysis//spectral/fullrun_pn_xmm0556200301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jan  1 18:24:06 2012] Spectral fit parameter nH value = 1.41663e+21
[Sun Jan  1 18:24:06 2012] Spectral fit parameter PhoIndex value = 2.41951
[Sun Jan  1 18:24:06 2012] Failed to get F(0.3-8.0) from xmm0556200301/analysis//spectral/fullrun_pn_xmm0556200301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jan  1 18:24:06 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 18:24:06 2012] Using Nh = 1.4e+21, photon index=2.42, rate=0.00304, arf fullrun_pn_xmm0556200301_pi300-10000_pass1_cl_src1.arf
[Sun Jan  1 18:24:06 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 18:24:06 2012] Updating source flux to 4.8e-14