[Sun Jan  1 10:40:57 2012] Detection parameters:
  Position = (277.9, 357.7) = 9 10 48.38 -9 37 59.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 51.9 +/- 12.0
  Background counts = 30.0
  Rate = 0.001 +/- 0.0003

[Sun Jan  1 10:40:57 2012] Off-axis axis estimate = 4.55'
[Sun Jan  1 12:59:48 2012] Using EEF radius (= 8.70 ")to estimate initial spatial extent for simple fitting
[Sun Jan  1 12:59:48 2012] Initial guess for spatial extent in simple fitting = 8.70"
[Sun Jan  1 12:59:48 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 1.000
[Sun Jan  1 12:59:48 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.70"
[Sun Jan  1 13:46:48 2012] fullrun_mos2_xmm0556200301_pi300-10000_cl_pass0_src15.ximg exists
[Sun Jan  1 13:46:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200301_pi300-10000_cl_pass0_src15.csv
[Sun Jan  1 13:46:48 2012] fullrun_mos2_xmm0556200301_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun Jan  1 13:46:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200301_pi300-10000_cl_pass0_src15.csv
[Sun Jan  1 13:46:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200301_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200301_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 13:46:48 2012] fullrun_mos2_xmm0556200301_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun Jan  1 13:46:48 2012] fullrun_mos2_xmm0556200301_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun Jan  1 13:46:48 2012] Fit fullrun_mos2_xmm0556200301_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun Jan  1 13:47:08 2012] Spatial fit model total counts = 216.971000, observed total counts = 217.000000
[Sun Jan  1 13:47:08 2012] Offset between fit and detection position for source 6 = 0.648386 pixels
[Sun Jan  1 13:47:08 2012] 212.690900 total counts/ 164.746000 bgd. counts: snr = 3.735382
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.648386 pixels
  Position = (278.6, 357.7) = 9 10 48.19 -9 37 59.9
  Extent = 7.7 (5.3-11.3)", rotation angle = 0
  Source counts = 47.9 +/- 14.6
  Background counts = 164.7
  Rate = 0.001 +/- 0.0004
[Sun Jan  1 13:47:08 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 13:47:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 13:47:08 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 13:47:08 2012] Source does appear to be extended
[Sun Jan  1 13:47:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 15:35:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jan  1 15:35:37 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Sun Jan  1 15:35:37 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.216
[Sun Jan  1 15:35:37 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 7.69"
[Sun Jan  1 16:12:13 2012] fullrun_mos2_xmm0556200301_pi300-10000_cl_pass1_src15.ximg exists
[Sun Jan  1 16:12:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200301_pi300-10000_cl_pass1_src15.csv
[Sun Jan  1 16:12:13 2012] fullrun_mos2_xmm0556200301_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun Jan  1 16:12:13 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200301_pi300-10000_cl_pass1_src15.csv
[Sun Jan  1 16:12:13 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200301_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200301_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jan  1 16:12:13 2012] fullrun_mos2_xmm0556200301_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun Jan  1 16:12:13 2012] fullrun_mos2_xmm0556200301_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun Jan  1 16:12:13 2012] Fit fullrun_mos2_xmm0556200301_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun Jan  1 16:12:37 2012] Warning, spatial fit 15 centroid is now closest to src. 3
[Sun Jan  1 16:12:37 2012] Vigneting correction estimate = 1.000000
[Sun Jan  1 16:12:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jan  1 16:12:37 2012] Assessing source extent using major axis lower bound
[Sun Jan  1 16:12:37 2012] Source does appear to be extended
[Sun Jan  1 16:12:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jan  1 17:55:14 2012] XMMSAS src. selection expression = ellipse(24186.767200, 31074.454800, 461.298013, 461.298013, 0.000000, X, Y)
[Sun Jan  1 17:55:14 2012] Writing source region out to fullrun_mos2_xmm0556200301_pi300-10000_pass1_cl_src6_src.reg
[Sun Jan  1 17:55:14 2012] Extracting stamp from image fullrun_mos2_xmm0556200301_pi300-10000_cl_sm2.00.img.gz, (252, 331) - (305, 384)
[Sun Jan  1 17:55:14 2012] XMMSAS bgd. selection expression = annulus(24186.767200, 31074.454800, 768.830022, 1537.660044, X, Y) && !ellipse(23722.760496, 29406.791979, 468.470414, 306.651022, 329.692636, X, Y)
[Sun Jan  1 17:55:14 2012] Writing fullrun_mos2_xmm0556200301_pi300-10000_pass1_cl_src6.gif
[Sun Jan  1 18:01:16 2012] Mean detx,y = (932.24, 3784.72) 
[Sun Jan  1 18:01:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jan  1 18:01:33 2012] Binned source spectrum to 10 counts/bin
[Sun Jan  1 18:01:34 2012] Setting source spectrum file to fullrun_mos2_xmm0556200301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jan  1 18:01:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556200301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Sun Jan  1 18:18:04 2012] Not generating rmf since there are only 47 counts
[Sun Jan  1 18:18:04 2012] rmf not generated due to insufficient counts
[Sun Jan  1 18:19:37 2012] Updating aperture counts using extracted products
[Sun Jan  1 18:19:37 2012] Error reading totcts from fullrun_mos2_xmm0556200301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Sun Jan  1 18:19:38 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jan  1 18:19:38 2012] Using photon index=1.80, rate=0.00122, arf fullrun_mos2_xmm0556200301_pi300-10000_pass1_cl_src6.arf
[Sun Jan  1 18:19:38 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jan  1 18:19:38 2012] Updating source flux to 2e-14
[Sun Jan  1 18:20:53 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting