[Sun Mar  4 10:21:48 2012] Detection parameters:
  Position = (385.4, 296.9) = 9 9 32.33 -9 42 22.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.3 +/- 33.3
  Background counts = 353.1
  Rate = 0.009 +/- 0.001

[Sun Mar  4 10:21:49 2012] Off-axis axis estimate = 6.31'
[Sun Mar  4 10:27:02 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 10:27:02 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Sun Mar  4 10:27:02 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.027
[Sun Mar  4 10:27:02 2012] Giving source the simple spatial ID 69 for pass 0, mean size = 9.58"
[Sun Mar  4 17:52:58 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src69.ximg exists
[Sun Mar  4 17:52:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src69.csv
[Sun Mar  4 17:52:58 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src69_1.ximg exists
[Sun Mar  4 17:52:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src69.csv
[Sun Mar  4 17:52:58 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src69_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src69.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 17:53:00 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src69.ximg exists
[Sun Mar  4 17:53:00 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src69_1.ximg exists
[Sun Mar  4 17:53:00 2012] Fit fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src69 appears to have run properly
[Mon Mar  5 01:38:34 2012] Spatial fit model total counts = 11514.900000, observed total counts = 9464.000000
[Mon Mar  5 01:38:34 2012] Poor agreement between spatial fit and data for source 72
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar  5 01:38:34 2012] Spatial fit model total counts = 5520.740000, observed total counts = 4685.000000
[Mon Mar  5 01:38:34 2012] Poor agreement between spatial fit and data for source 72
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar  5 01:38:34 2012] Warning, spatial fit 69 centroid is now closest to src. 67
[Mon Mar  5 01:38:34 2012] Spatial fit model total counts = 4432.790000, observed total counts = 3791.000000
[Mon Mar  5 01:38:34 2012] Poor agreement between spatial fit and data for source 72
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar  5 01:38:34 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 01:38:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 01:38:34 2012] Assessing source extent using major
[Mon Mar  5 01:38:34 2012] Source does appear to be extended
[Mon Mar  5 01:38:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 01:38:34 2012] Source is confused with source 69
[Mon Mar  5 01:39:17 2012] Using EEF radius (= 9.58 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 01:39:17 2012] Initial guess for spatial extent in simple fitting = 9.58"
[Mon Mar  5 01:39:17 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.027
[Mon Mar  5 01:39:17 2012] Giving source the simple spatial ID 49 for pass 1, mean size = 9.58"
[Mon Mar  5 05:52:27 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src49.ximg exists
[Mon Mar  5 05:52:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src49.csv
[Mon Mar  5 05:52:27 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src49_1.ximg exists
[Mon Mar  5 05:52:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src49.csv
[Mon Mar  5 05:52:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 05:52:29 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Mon Mar  5 05:52:29 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Mon Mar  5 05:52:29 2012] Fit fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src49 appears to have run properly
[Mon Mar  5 15:22:37 2012] Spatial fit model total counts = 4537.720000, observed total counts = 3915.000000
[Mon Mar  5 15:22:37 2012] Poor agreement between spatial fit and data for source 72
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar  5 15:22:37 2012] Spatial fit model total counts = 4710.630000, observed total counts = 4658.000000
[Mon Mar  5 15:22:37 2012] Offset between fit and detection position for source 72 = 0.844114 pixels
[Mon Mar  5 15:22:37 2012] 4719.207000 total counts/ 4490.830000 bgd. counts: snr = 3.407917
Spatial fit parameters:
  Offset between fit and detection position for source 72 = 0.844114 pixels
  Position = (386.3, 296.9) = 9 9 32.08 -9 42 22.2
  Extent = 9.2 (5.3-19.2)", rotation angle = 0
  Source counts = 228.4 +/- 68.7
  Background counts = 4490.8
  Rate = 0.005 +/- 0.001
[Mon Mar  5 15:22:37 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 15:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 15:22:37 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 15:22:37 2012] Source does appear to be extended
[Mon Mar  5 15:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 15:23:40 2012] XMMSAS src. selection expression = ellipse(33558.357400, 25781.985400, 552.436216, 552.436216, 0.000000, X, Y)
[Mon Mar  5 15:23:40 2012] Writing source region out to fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src72_src.reg
[Mon Mar  5 15:23:40 2012] Extracting stamp from image fullrun_pn_xmm0556200101_pi300-10000_cl_sm2.00.img.gz, (355, 265) - (418, 329)
[Mon Mar  5 15:23:40 2012] XMMSAS bgd. selection expression = annulus(33558.357400, 25781.985400, 920.727026, 1841.454053, X, Y) && !ellipse(31822.376000, 28741.749000, 1482.688043, 1482.688043, 0.000000, X, Y) && !ellipse(35812.707245, 28491.692291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33953.128000, 28192.629600, 1295.520037, 1295.520037, 0.000000, X, Y) && !ellipse(32777.114000, 28783.044400, 1802.464052, 1802.464052, 0.000000, X, Y) && !ellipse(35036.764313, 28136.571503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36146.051483, 27969.928589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33837.994690, 27742.833313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34167.592682, 27864.646057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36185.746826, 27543.937103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35381.517212, 27513.988373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34539.153412, 27348.115417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32173.153259, 27376.149872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31215.470917, 27369.315826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37545.606000, 26534.574600, 3544.096102, 3544.096102, 0.000000, X, Y) && !ellipse(34871.839203, 26553.589935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32620.000000, 26062.975037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35467.104736, 27094.634460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31345.960297, 25969.908295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36791.260000, 25662.178800, 1780.776051, 1780.776051, 0.000000, X, Y) && !ellipse(34081.198029, 24914.921783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32102.003784, 23877.299164, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar  5 15:23:40 2012] Writing fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src72.gif
[Mon Mar  5 16:34:11 2012] Mean detx,y = (5975.54, 4465.08) 
[Mon Mar  5 16:34:13 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 16:34:29 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 16:34:29 2012] Setting source spectrum file to fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Mon Mar  5 16:34:29 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src72_bgd.pi.gz
[Mon Mar  5 22:01:33 2012] Updating aperture counts using extracted products
[Mon Mar  5 22:01:33 2012] Error reading totcts from fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src72_src_b10.pi.gz
[Mon Mar  5 22:01:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 22:01:34 2012] Using photon index=1.80, rate=0.0046, arf fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src72.arf
[Mon Mar  5 22:01:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 22:01:34 2012] Updating source flux to 2.2e-14
[Mon Mar  5 22:09:02 2012] Flag p found in src. 72 procflags, skipping spectral fitting
[Mon Mar  5 22:09:02 2012] Flag c found in src. 72 procflags, skipping spectral fitting