[Sun Mar  4 10:21:48 2012] Detection parameters:
  Position = (403.3, 324.0) = 9 9 27.09 -9 40 24.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 720.3 +/- 49.9
  Background counts = 670.0
  Rate = 0.03 +/- 0.002

[Sun Mar  4 10:21:49 2012] Off-axis axis estimate = 7.82'
[Sun Mar  4 10:27:02 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 10:27:02 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Sun Mar  4 10:27:02 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.997
[Sun Mar  4 10:27:02 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 10.34"
[Sun Mar  4 17:52:57 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src43.ximg exists
[Sun Mar  4 17:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src43.csv
[Sun Mar  4 17:52:57 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src43_1.ximg exists
[Sun Mar  4 17:52:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src43.csv
[Sun Mar  4 17:52:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 17:53:00 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Sun Mar  4 17:53:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun Mar  4 17:53:00 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Sun Mar  4 17:53:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src43.csv
[Sun Mar  4 17:53:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 01:38:34 2012] Warning, spatial fit 43 centroid is now closest to src. 49
[Mon Mar  5 01:38:34 2012] Source 44 is offset by 4.330946 and -1.676144 pixels which is larger than
2 X fitted extent = 1.145007 x 1.145007, not incorporating fit results
[Mon Mar  5 01:38:34 2012] Source 44 is offset by -2.825652 and -3.929109 pixels which is larger than
2 X fitted extent = 1.236933 x 1.236933, not incorporating fit results
[Mon Mar  5 01:38:34 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 01:38:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 01:38:34 2012] Assessing source extent using major
[Mon Mar  5 01:38:34 2012] Source does appear to be extended
[Mon Mar  5 01:38:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 01:39:17 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 01:39:17 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Mon Mar  5 01:39:17 2012] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.997
[Mon Mar  5 01:39:17 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 10.34"
[Mon Mar  5 05:52:27 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src26.ximg exists
[Mon Mar  5 05:52:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src26.csv
[Mon Mar  5 05:52:27 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Mar  5 05:52:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src26.csv
[Mon Mar  5 05:52:27 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 05:52:28 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Mar  5 05:52:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon Mar  5 05:52:28 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Mar  5 05:52:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src26.csv
[Mon Mar  5 05:52:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 15:22:37 2012] Warning, spatial fit 26 centroid is now closest to src. 35
[Mon Mar  5 15:22:37 2012] Spatial fit model total counts = 7996.050000, observed total counts = 6153.000000
[Mon Mar  5 15:22:37 2012] Poor agreement between spatial fit and data for source 44
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar  5 15:22:37 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 15:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 15:22:37 2012] Assessing source extent using major
[Mon Mar  5 15:22:37 2012] Source does appear to be extended
[Mon Mar  5 15:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 15:23:39 2012] XMMSAS src. selection expression = ellipse(35036.764313, 28136.571503, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar  5 15:23:39 2012] Writing source region out to fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src44_src.reg
[Mon Mar  5 15:23:39 2012] Extracting stamp from image fullrun_pn_xmm0556200101_pi300-10000_cl_sm2.00.img.gz, (366, 286) - (441, 361)
[Mon Mar  5 15:23:39 2012] XMMSAS bgd. selection expression = annulus(35036.764313, 28136.571503, 1087.500000, 2175.000000, X, Y) && !ellipse(34546.014008, 30803.617462, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32610.885284, 31025.931030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34975.629608, 30058.964050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34598.108337, 29777.310577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32041.394000, 29623.519400, 1523.040044, 1523.040044, 0.000000, X, Y) && !ellipse(35467.216248, 29277.721680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34790.956390, 28828.796051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31822.376000, 28741.749000, 1482.688043, 1482.688043, 0.000000, X, Y) && !ellipse(35812.707245, 28491.692291, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33953.128000, 28192.629600, 1295.520037, 1295.520037, 0.000000, X, Y) && !ellipse(32777.114000, 28783.044400, 1802.464052, 1802.464052, 0.000000, X, Y) && !ellipse(37185.455627, 27782.669373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36146.051483, 27969.928589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33837.994690, 27742.833313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34167.592682, 27864.646057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36185.746826, 27543.937103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35381.517212, 27513.988373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34539.153412, 27348.115417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32173.153259, 27376.149872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37540.136000, 27399.762000, 1790.144052, 1790.144052, 0.000000, X, Y) && !ellipse(37805.592000, 26789.529400, 1840.288053, 1840.288053, 0.000000, X, Y) && !ellipse(37545.606000, 26534.574600, 3544.096102, 3544.096102, 0.000000, X, Y) && !ellipse(34871.839203, 26553.589935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36944.150635, 26330.240906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32620.000000, 26062.975037, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38016.102783, 25874.510437, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33558.357400, 25781.985400, 736.581621, 736.581621, 0.000000, X, Y) && !ellipse(35467.104736, 27094.634460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37294.066000, 26649.254000, 1772.048051, 1772.048051, 0.000000, X, Y) && !ellipse(36791.260000, 25662.178800, 1780.776051, 1780.776051, 0.000000, X, Y) && !ellipse(36428.222687, 25312.958466, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar  5 15:23:39 2012] Writing fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src44.gif
[Mon Mar  5 15:45:18 2012] Mean detx,y = (8202.11, 2821.61) 
[Mon Mar  5 15:45:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 15:45:43 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 15:45:44 2012] Setting source spectrum file to fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Mon Mar  5 15:45:44 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src44_bgd.pi.gz
[Mon Mar  5 17:28:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar  5 17:28:36 2012] rmf not generated due to insufficient counts
[Mon Mar  5 22:01:33 2012] Updating aperture counts using extracted products
[Mon Mar  5 22:01:33 2012] Error reading totcts from fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src44_src_b10.pi.gz
[Mon Mar  5 22:01:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 22:01:34 2012] Using photon index=1.80, rate=0.0267, arf fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src44.arf
[Mon Mar  5 22:01:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 22:01:34 2012] Updating source flux to 1.6e-13
[Mon Mar  5 22:09:02 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting