[Sun Mar  4 10:21:47 2012] Detection parameters:
  Position = (390.5, 434.7) = 9 9 30.87 -9 32 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1582.0 +/- 51.1
  Background counts = 154.7
  Rate = 0.03 +/- 0.001

[Sun Mar  4 10:21:49 2012] Off-axis axis estimate = 11.92'
[Sun Mar  4 10:27:02 2012] Using EEF radius (= 12.39 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 10:27:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Mar  4 10:27:02 2012] Initial guess for spatial extent in simple fitting = 12.39"
[Sun Mar  4 10:27:02 2012] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.093
[Sun Mar  4 10:27:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.39"
[Sun Mar  4 17:52:56 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Mar  4 17:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src1.csv
[Sun Mar  4 17:52:56 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Mar  4 17:52:56 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src1.csv
[Sun Mar  4 17:52:56 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 17:52:58 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Mar  4 17:52:58 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Mar  4 17:52:58 2012] Fit fullrun_pn_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Mar  5 01:38:34 2012] Spatial fit model total counts = 4673.150000, observed total counts = 4625.000000
[Mon Mar  5 01:38:34 2012] Offset between fit and detection position for source 1 = 0.296055 pixels
[Mon Mar  5 01:38:34 2012] 4659.220000 total counts/ 3555.630000 bgd. counts: snr = 18.507573
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.296055 pixels
  Position = (390.2, 434.6) = 9 9 30.94 -9 32 23.4
  Extent = 5.9 (5.5-6.3)", rotation angle = 0
  Source counts = 1103.6 +/- 68.3
  Background counts = 3555.6
  Rate = 0.02 +/- 0.001
[Mon Mar  5 01:38:34 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 01:38:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 01:38:34 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 01:38:34 2012] Source does appear to be extended
[Mon Mar  5 01:38:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 01:39:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar  5 01:39:17 2012] Initial guess for spatial extent in simple fitting = 5.91"
[Mon Mar  5 01:39:17 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.868
[Mon Mar  5 01:39:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.91"
[Mon Mar  5 05:52:26 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src1.ximg exists
[Mon Mar  5 05:52:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src1.csv
[Mon Mar  5 05:52:26 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Mar  5 05:52:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src1.csv
[Mon Mar  5 05:52:26 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 05:52:28 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Mar  5 05:52:28 2012] fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Mar  5 05:52:28 2012] Fit fullrun_pn_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Mar  5 15:22:37 2012] Spatial fit model total counts = 2927.500000, observed total counts = 2895.000000
[Mon Mar  5 15:22:37 2012] Offset between fit and detection position for source 1 = 0.035514 pixels
[Mon Mar  5 15:22:37 2012] 2909.270000 total counts/ 1866.910000 bgd. counts: snr = 24.124374
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.035514 pixels
  Position = (390.2, 434.6) = 9 9 30.94 -9 32 23.2
  Extent = 5.6 (5.2-6.0)", rotation angle = 0
  Source counts = 1042.4 +/- 53.9
  Background counts = 1866.9
  Rate = 0.02 +/- 0.001
[Mon Mar  5 15:22:37 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 15:22:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 15:22:37 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 15:22:37 2012] Source does appear to be extended
[Mon Mar  5 15:22:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 15:23:38 2012] Counts = 1042.360000, rescaling region sizes by 2.000000
[Mon Mar  5 15:23:38 2012] XMMSAS src. selection expression = ellipse(33899.775540, 37761.586000, 671.134819, 671.134819, 0.000000, X, Y)
[Mon Mar  5 15:23:38 2012] Writing source region out to fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src1_src.reg
[Mon Mar  5 15:23:38 2012] Extracting stamp from image fullrun_pn_xmm0556200101_pi300-10000_cl_sm2.00.img.gz, (352, 396) - (429, 473)
[Mon Mar  5 15:23:38 2012] XMMSAS bgd. selection expression = annulus(33899.775540, 37761.586000, 2237.116064, 4474.232129, X, Y) && !ellipse(37493.186798, 35353.838531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38167.030579, 34998.173462, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Mar  5 15:23:38 2012] Writing fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src1.gif
[Mon Mar  5 15:24:04 2012] Mean detx,y = (10765.96, -6510.70) 
[Mon Mar  5 15:24:08 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 15:25:04 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 15:25:05 2012] Setting source spectrum file to fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar  5 15:25:05 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Mar  5 22:01:33 2012] Updating aperture counts using extracted products
[Mon Mar  5 22:01:33 2012] Error reading totcts from fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Mar  5 22:01:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 22:01:34 2012] Using photon index=1.80, rate=0.021, arf fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src1.arf
[Mon Mar  5 22:01:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 22:01:34 2012] Updating source flux to 1.4e-13
[Mon Mar  5 22:12:16 2012] Reading fit data from xmm0556200101/analysis//spectral/fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Mar  5 22:12:16 2012] Spectral fit parameter nH value = 6.50971e+20
[Mon Mar  5 22:12:16 2012] Spectral fit parameter PhoIndex value = 2.21738
[Mon Mar  5 22:12:16 2012] Failed to get F(0.3-8.0) from xmm0556200101/analysis//spectral/fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Mar  5 22:12:16 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 22:12:16 2012] Using Nh = 6.5e+20, photon index=2.22, rate=0.021, arf fullrun_pn_xmm0556200101_pi300-10000_pass1_cl_src1.arf
[Mon Mar  5 22:12:16 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 22:12:16 2012] Updating source flux to 1.3e-13