[Sun Mar  4 10:23:00 2012] Detection parameters:
  Position = (464.0, 306.0) = 9 9 9.21 -9 41 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 213.3 +/- 28.4
  Background counts = 236.6
  Rate = 0.004 +/- 0.0005

[Sun Mar  4 10:23:01 2012] Off-axis axis estimate = 12.02'
[Sun Mar  4 20:57:42 2012] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 20:57:42 2012] Initial guess for spatial extent in simple fitting = 12.44"
[Sun Mar  4 20:57:42 2012] source mask rpix=2.9, npix_max = 45, mask sum = 35, frac = 0.775
[Sun Mar  4 20:57:42 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 12.44"
[Mon Mar  5 01:38:10 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src47.ximg exists
[Mon Mar  5 01:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src47.csv
[Mon Mar  5 01:38:10 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src47_1.ximg exists
[Mon Mar  5 01:38:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src47.csv
[Mon Mar  5 01:38:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 01:38:12 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src47.ximg exists
[Mon Mar  5 01:38:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Mon Mar  5 01:38:12 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists
[Mon Mar  5 01:38:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src47.csv
[Mon Mar  5 01:38:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src47_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 01:39:00 2012] Warning, spatial fit 47 centroid is now closest to src. 63
[Mon Mar  5 01:39:00 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 01:39:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 01:39:00 2012] Assessing source extent using major
[Mon Mar  5 01:39:00 2012] Source does appear to be extended
[Mon Mar  5 01:39:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 01:39:00 2012] Source is confused with source 19
[Mon Mar  5 08:46:28 2012] Using EEF radius (= 12.44 ")to estimate initial spatial extent for simple fitting
[Mon Mar  5 08:46:28 2012] Initial guess for spatial extent in simple fitting = 12.44"
[Mon Mar  5 08:46:28 2012] source mask rpix=2.9, npix_max = 45, mask sum = 35, frac = 0.775
[Mon Mar  5 08:46:28 2012] Giving source the simple spatial ID 44 for pass 1, mean size = 12.44"
[Mon Mar  5 15:22:05 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src44.ximg exists
[Mon Mar  5 15:22:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src44.csv
[Mon Mar  5 15:22:05 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src44_1.ximg exists
[Mon Mar  5 15:22:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src44.csv
[Mon Mar  5 15:22:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 15:22:09 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Mon Mar  5 15:22:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Mon Mar  5 15:22:09 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Mon Mar  5 15:22:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src44.csv
[Mon Mar  5 15:22:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 15:23:11 2012] Warning, spatial fit 44 centroid is now closest to src. 63
[Mon Mar  5 15:23:11 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 15:23:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 15:23:11 2012] Assessing source extent using major
[Mon Mar  5 15:23:11 2012] Source does appear to be extended
[Mon Mar  5 15:23:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Mar  5 19:47:22 2012] XMMSAS src. selection expression = ellipse(40321.427551, 26577.493164, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Mar  5 19:47:22 2012] Writing source region out to fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src26_src.reg
[Mon Mar  5 19:47:22 2012] Extracting stamp from image fullrun_mos2_xmm0556200101_pi300-10000_cl_sm2.00.img.gz, (427, 269) - (502, 344)
[Mon Mar  5 19:47:22 2012] XMMSAS bgd. selection expression = annulus(40321.427551, 26577.493164, 1087.500000, 2175.000000, X, Y) && !ellipse(39066.992584, 25305.635895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38862.982000, 24934.166400, 555.339216, 429.461612, 90.000000, X, Y) && !ellipse(37416.246000, 27527.422000, 1776.232051, 1776.232051, 0.000000, X, Y) && !ellipse(37543.758000, 27156.562000, 3651.808105, 2472.784071, 210.697000, X, Y) && !ellipse(37802.636000, 27656.902000, 1648.656047, 1562.792045, 11.075573, X, Y) && !ellipse(36871.150000, 27440.054000, 3688.976106, 3688.976106, 0.000000, X, Y) && !ellipse(38210.260000, 26553.092000, 1825.904053, 1825.904053, 0.000000, X, Y) && !ellipse(38792.542206, 26658.437042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37302.110000, 28094.392000, 1865.656054, 1865.656054, 0.000000, X, Y) && !ellipse(37534.945099, 25804.343323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39352.248932, 26750.112549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39034.752563, 27174.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35442.482294, 29410.392272, 3366.960097, 3351.966690, 338.164923, X, Y) && !ellipse(38553.940033, 25883.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37638.419556, 24594.149109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40509.573547, 25777.803650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39758.080780, 26262.120819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38158.348633, 28703.656555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39925.329041, 25512.837036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40450.280793, 25401.160411, 1816.384052, 1762.904591, 95.493309, X, Y) && !ellipse(40966.015564, 25869.200378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40811.357452, 26744.775940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39755.066000, 27583.086000, 1901.432055, 1901.432055, 0.000000, X, Y) && !ellipse(41040.850000, 24322.932000, 2085.136060, 2085.136060, 0.000000, X, Y) && !ellipse(42201.288000, 23008.576000, 1541.344044, 1541.344044, 0.000000, X, Y)
[Mon Mar  5 19:47:22 2012] Writing fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src26.gif
[Mon Mar  5 20:25:53 2012] Mean detx,y = (-12427.82, -6183.20) 
[Mon Mar  5 20:25:54 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 20:26:11 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 20:26:12 2012] Setting source spectrum file to fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Mar  5 20:26:12 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src26_bgd.pi.gz
[Mon Mar  5 21:39:03 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Mar  5 21:39:03 2012] rmf not generated due to insufficient counts
[Mon Mar  5 22:01:37 2012] Updating aperture counts using extracted products
[Mon Mar  5 22:01:37 2012] Error reading totcts from fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src26_src_b10.pi.gz
[Mon Mar  5 22:01:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 22:01:37 2012] Using photon index=1.80, rate=0.00391, arf fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src26.arf
[Mon Mar  5 22:01:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 22:01:37 2012] Updating source flux to 1.1e-13
[Mon Mar  5 22:04:59 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting