[Sun Mar  4 10:22:59 2012] Detection parameters:
  Position = (448.3, 287.1) = 9 9 13.85 -9 43 4.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 641.0 +/- 38.0
  Background counts = 234.0
  Rate = 0.02 +/- 0.001

[Sun Mar  4 10:23:01 2012] Off-axis axis estimate = 10.89'
[Sun Mar  4 20:57:42 2012] Using EEF radius (= 11.88 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 20:57:42 2012] Initial guess for spatial extent in simple fitting = 11.88"
[Sun Mar  4 20:57:42 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.863
[Sun Mar  4 20:57:42 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.88"
[Mon Mar  5 01:38:09 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src2.ximg exists
[Mon Mar  5 01:38:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src2.csv
[Mon Mar  5 01:38:09 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Mar  5 01:38:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src2.csv
[Mon Mar  5 01:38:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 01:38:11 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Mar  5 01:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Mar  5 01:38:11 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Mar  5 01:38:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Mon Mar  5 01:38:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 01:39:00 2012] Warning, spatial fit 2 centroid is now closest to src. 27
[Mon Mar  5 01:39:00 2012] Spatial fit model total counts = 3678.980000, observed total counts = 3411.000000
[Mon Mar  5 01:39:00 2012] Offset between fit and detection position for source 2 = 0.866268 pixels
[Mon Mar  5 01:39:00 2012] Warning, changing simple spatial fit ID from 2 to 66
[Mon Mar  5 01:39:00 2012] 3700.572000 total counts/ 3434.750000 bgd. counts: snr = 4.535690
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.866268 pixels
  Position = (447.4, 287.1) = 9 9 14.10 -9 43 4.6
  Extent = 6.9 (5.3-8.3)" x 5.0 (3.1-9.5)", rotation angle = 90
  Source counts = 265.8 +/- 60.8
  Background counts = 3434.8
  Rate = 0.005 +/- 0.001
[Mon Mar  5 01:39:00 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 01:39:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 01:39:00 2012] Assessing source extent using major axis lower bound
[Mon Mar  5 01:39:00 2012] Source does appear to be extended
[Mon Mar  5 01:39:00 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.56
[Mon Mar  5 01:39:00 2012] Source is confused with source 1
[Mon Mar  5 08:46:28 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Mar  5 08:46:28 2012] Initial guess for spatial extent in simple fitting = 5.96"
[Mon Mar  5 08:46:28 2012] source mask rpix=1.4, npix_max = 13, mask sum = 12, frac = 0.857
[Mon Mar  5 08:46:28 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 5.96"
[Mon Mar  5 15:22:04 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src2.ximg exists
[Mon Mar  5 15:22:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src2.csv
[Mon Mar  5 15:22:04 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Mar  5 15:22:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src2.csv
[Mon Mar  5 15:22:04 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 15:22:06 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Mar  5 15:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Mar  5 15:22:06 2012] fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Mar  5 15:22:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Mon Mar  5 15:22:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556200101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Mar  5 15:23:11 2012] Spatial fit model total counts = 7157.860000, observed total counts = 6125.000000
[Mon Mar  5 15:23:11 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Mar  5 15:23:11 2012] Warning, spatial fit 2 centroid is now closest to src. 73
[Mon Mar  5 15:23:11 2012] Spatial fit model total counts = 3672.050000, observed total counts = 3411.000000
[Mon Mar  5 15:23:11 2012] Offset between fit and detection position for source 2 = 0.141122 pixels
[Mon Mar  5 15:23:11 2012] Warning, changing simple spatial fit ID from 2 to 60
[Mon Mar  5 15:23:11 2012] 3696.901000 total counts/ 3428.370000 bgd. counts: snr = 4.586175
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 0.141122 pixels
  Position = (447.3, 287.2) = 9 9 14.14 -9 43 4.5
  Extent = 6.9" x 5.4", rotation angle = 90
  Source counts = 268.5 +/- 60.8
  Background counts = 3428.4
  Rate = 0.005 +/- 0.001
[Mon Mar  5 15:23:11 2012] Vigneting correction estimate = 1.000000
[Mon Mar  5 15:23:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Mar  5 15:23:11 2012] Assessing source extent using major
[Mon Mar  5 15:23:11 2012] Source does appear to be extended
[Mon Mar  5 15:23:11 2012] Computing asymmetry using major and minor axis, asym = 1.29
[Mon Mar  5 19:47:20 2012] XMMSAS src. selection expression = ellipse(38862.982000, 24934.166400, 416.504412, 322.096209, 90.000000, X, Y)
[Mon Mar  5 19:47:20 2012] Writing source region out to fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src2_src.reg
[Mon Mar  5 19:47:20 2012] Extracting stamp from image fullrun_mos2_xmm0556200101_pi300-10000_cl_sm2.00.img.gz, (423, 263) - (471, 311)
[Mon Mar  5 19:47:20 2012] XMMSAS bgd. selection expression = annulus(38862.982000, 24934.166400, 694.174020, 1388.348040, X, Y) && !ellipse(39066.992584, 25305.635895, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37416.246000, 27527.422000, 1776.232051, 1776.232051, 0.000000, X, Y) && !ellipse(37543.758000, 27156.562000, 3651.808105, 2472.784071, 210.697000, X, Y) && !ellipse(37802.636000, 27656.902000, 1648.656047, 1562.792045, 11.075573, X, Y) && !ellipse(36871.150000, 27440.054000, 3688.976106, 3688.976106, 0.000000, X, Y) && !ellipse(38210.260000, 26553.092000, 1825.904053, 1825.904053, 0.000000, X, Y) && !ellipse(38792.542206, 26658.437042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37302.110000, 28094.392000, 1865.656054, 1865.656054, 0.000000, X, Y) && !ellipse(37534.945099, 25804.343323, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39352.248932, 26750.112549, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39034.752563, 27174.901306, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35442.482294, 29410.392272, 3366.960097, 3351.966690, 338.164923, X, Y) && !ellipse(38553.940033, 25883.460541, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37638.419556, 24594.149109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40509.573547, 25777.803650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39758.080780, 26262.120819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40321.427551, 26577.493164, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39925.329041, 25512.837036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40450.280793, 25401.160411, 1816.384052, 1762.904591, 95.493309, X, Y) && !ellipse(40966.015564, 25869.200378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40811.357452, 26744.775940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39755.066000, 27583.086000, 1901.432055, 1901.432055, 0.000000, X, Y) && !ellipse(41040.850000, 24322.932000, 2085.136060, 2085.136060, 0.000000, X, Y)
[Mon Mar  5 19:47:20 2012] Writing fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src2.gif
[Mon Mar  5 19:49:20 2012] Mean detx,y = (-10507.16, -7275.19) 
[Mon Mar  5 19:49:21 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Mar  5 19:49:33 2012] Binned source spectrum to 10 counts/bin
[Mon Mar  5 19:49:33 2012] Setting source spectrum file to fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar  5 19:49:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Mar  5 22:01:36 2012] Updating aperture counts using extracted products
[Mon Mar  5 22:01:36 2012] Error reading totcts from fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Mar  5 22:01:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 22:01:37 2012] Using photon index=1.80, rate=0.00492, arf fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src2.arf
[Mon Mar  5 22:01:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 22:01:37 2012] Updating source flux to 1.4e-13
[Mon Mar  5 22:04:59 2012] Flag p found in src. 2 procflags, skipping spectral fitting
[Mon Mar  5 22:04:59 2012] Flag c found in src. 2 procflags, skipping spectral fitting
[Mon Mar  5 22:09:02 2012] Reading fit data from xmm0556200101/analysis//spectral/fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src2_pl.csv
[Mon Mar  5 22:09:02 2012] Spectral fit parameter nH value = 1.03566e+21
[Mon Mar  5 22:09:02 2012] Spectral fit parameter PhoIndex value = 0.905743
[Mon Mar  5 22:09:02 2012] Failed to get F(0.3-8.0) from xmm0556200101/analysis//spectral/fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src2_pl.csv, possibly due to different flux energy range selected
[Mon Mar  5 22:09:02 2012] Calculating source flux in energy range 0.30-8.00
[Mon Mar  5 22:09:02 2012] Using Nh = 1e+21, photon index=0.91, rate=0.00492, arf fullrun_mos2_xmm0556200101_pi300-10000_pass1_cl_src2.arf
[Mon Mar  5 22:09:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Mar  5 22:09:02 2012] Updating source flux to 2.4e-13