[Mon Feb 27 02:33:27 2012] Detection parameters:
  Position = (193.7, 476.4) = 9 50 29.12 -25 0 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.8 +/- 14.1
  Background counts = 51.8
  Rate = 0.004 +/- 0.0007

[Mon Feb 27 02:33:29 2012] Off-axis axis estimate = 14.97'
[Mon Feb 27 02:35:55 2012] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 02:35:55 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 27 02:35:55 2012] Initial guess for spatial extent in simple fitting = 13.92"
[Mon Feb 27 02:35:55 2012] source mask rpix=3.2, npix_max = 54, mask sum = 47, frac = 0.859
[Mon Feb 27 02:35:55 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 13.92"
[Mon Feb 27 03:14:45 2012] fullrun_pn_xmm0556180401_pi300-10000_cl_pass0_src6.ximg exists
[Mon Feb 27 03:14:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556180401_pi300-10000_cl_pass0_src6.csv
[Mon Feb 27 03:14:45 2012] fullrun_pn_xmm0556180401_pi300-10000_cl_pass0_src6_1.ximg exists
[Mon Feb 27 03:14:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556180401_pi300-10000_cl_pass0_src6.csv
[Mon Feb 27 03:14:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556180401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556180401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 03:14:45 2012] fullrun_pn_xmm0556180401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Mon Feb 27 03:14:45 2012] fullrun_pn_xmm0556180401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Mon Feb 27 03:14:45 2012] Fit fullrun_pn_xmm0556180401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Mon Feb 27 03:51:49 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 17.453330 pixels away
[Mon Feb 27 03:51:49 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 03:51:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 03:51:49 2012] Assessing source extent using major
[Mon Feb 27 03:51:49 2012] Source does appear to be extended
[Mon Feb 27 03:51:49 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 03:52:07 2012] Using EEF radius (= 13.92 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 03:52:07 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 27 03:52:07 2012] Initial guess for spatial extent in simple fitting = 13.92"
[Mon Feb 27 03:52:07 2012] source mask rpix=3.2, npix_max = 54, mask sum = 47, frac = 0.859
[Mon Feb 27 03:52:07 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 13.92"
[Mon Feb 27 04:26:21 2012] fullrun_pn_xmm0556180401_pi300-10000_cl_pass1_src6.ximg exists
[Mon Feb 27 04:26:21 2012] fullrun_pn_xmm0556180401_pi300-10000_cl_pass1_src6_1.ximg exists
[Mon Feb 27 04:26:21 2012] Fit fullrun_pn_xmm0556180401_pi300-10000_cl_pass1_src6 appears to have run properly
[Mon Feb 27 04:26:22 2012] fullrun_pn_xmm0556180401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Mon Feb 27 04:26:22 2012] fullrun_pn_xmm0556180401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Mon Feb 27 04:26:22 2012] Fit fullrun_pn_xmm0556180401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Mon Feb 27 05:07:56 2012] Warning, spatial fit 6 centroid is now closest to src. 19
[Mon Feb 27 05:07:56 2012] Source 6 is offset by 3.031924 and 2.719179 pixels which is larger than
2 X fitted extent = 2.022359 x 12.539449, not incorporating fit results
[Mon Feb 27 05:07:56 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 05:07:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 05:07:56 2012] Assessing source extent using major
[Mon Feb 27 05:07:56 2012] Source does appear to be extended
[Mon Feb 27 05:07:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 05:08:10 2012] XMMSAS src. selection expression = ellipse(16799.835358, 41400.946533, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 05:08:10 2012] Writing source region out to fullrun_pn_xmm0556180401_pi300-10000_pass1_cl_src6_src.reg
[Mon Feb 27 05:08:10 2012] Extracting stamp from image fullrun_pn_xmm0556180401_pi300-10000_cl_sm2.00.img.gz, (156, 439) - (231, 514)
[Mon Feb 27 05:08:10 2012] XMMSAS bgd. selection expression = annulus(16799.835358, 41400.946533, 1087.500000, 2175.000000, X, Y) && !ellipse(17695.570557, 42142.432495, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Feb 27 05:08:10 2012] Writing fullrun_pn_xmm0556180401_pi300-10000_pass1_cl_src6.gif
[Mon Feb 27 05:12:22 2012] Mean detx,y = (-6538.18, -15690.41) 
[Mon Feb 27 05:12:27 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 05:13:11 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 05:13:12 2012] Setting source spectrum file to fullrun_pn_xmm0556180401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Feb 27 05:13:12 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556180401_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Feb 27 05:36:47 2012] Not generating rmf since there are only 73 counts
[Mon Feb 27 05:36:47 2012] rmf not generated due to insufficient counts
[Mon Feb 27 05:54:38 2012] Updating aperture counts using extracted products
[Mon Feb 27 05:54:38 2012] Error reading totcts from fullrun_pn_xmm0556180401_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Feb 27 05:54:39 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 05:54:39 2012] Using photon index=1.80, rate=0.00377, arf fullrun_pn_xmm0556180401_pi300-10000_pass1_cl_src6.arf
[Mon Feb 27 05:54:39 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 05:54:39 2012] Updating source flux to 3.1e-14
[Mon Feb 27 05:54:58 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting