[Mon Feb 27 02:33:30 2012] Detection parameters:
  Position = (131.8, 392.1) = 9 50 48.96 -25 6 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 164.3 +/- 16.8
  Background counts = 19.8
  Rate = 0.009 +/- 0.0009

[Mon Feb 27 02:33:31 2012] Off-axis axis estimate = 13.86'
[Mon Feb 27 03:14:46 2012] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 03:14:46 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 27 03:14:46 2012] Initial guess for spatial extent in simple fitting = 13.36"
[Mon Feb 27 03:14:46 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.961
[Mon Feb 27 03:14:46 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 13.36"
[Mon Feb 27 03:29:06 2012] fullrun_mos1_xmm0556180401_pi300-10000_cl_pass0_src2.ximg exists
[Mon Feb 27 03:29:06 2012] fullrun_mos1_xmm0556180401_pi300-10000_cl_pass0_src2_1.ximg exists
[Mon Feb 27 03:29:06 2012] Fit fullrun_mos1_xmm0556180401_pi300-10000_cl_pass0_src2 appears to have run properly
[Mon Feb 27 03:29:06 2012] fullrun_mos1_xmm0556180401_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Mon Feb 27 03:29:06 2012] fullrun_mos1_xmm0556180401_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Mon Feb 27 03:29:06 2012] Fit fullrun_mos1_xmm0556180401_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Mon Feb 27 03:51:52 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.858827 pixels away
[Mon Feb 27 03:51:52 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 03:51:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 03:51:52 2012] Assessing source extent using major
[Mon Feb 27 03:51:52 2012] Source does appear to be extended
[Mon Feb 27 03:51:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 04:26:22 2012] Using EEF radius (= 13.36 ")to estimate initial spatial extent for simple fitting
[Mon Feb 27 04:26:22 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Feb 27 04:26:22 2012] Initial guess for spatial extent in simple fitting = 13.36"
[Mon Feb 27 04:26:22 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.961
[Mon Feb 27 04:26:22 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 13.36"
[Mon Feb 27 04:43:37 2012] fullrun_mos1_xmm0556180401_pi300-10000_cl_pass1_src2.ximg exists
[Mon Feb 27 04:43:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556180401_pi300-10000_cl_pass1_src2.csv
[Mon Feb 27 04:43:37 2012] fullrun_mos1_xmm0556180401_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Feb 27 04:43:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556180401_pi300-10000_cl_pass1_src2.csv
[Mon Feb 27 04:43:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556180401_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556180401_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Feb 27 04:43:37 2012] fullrun_mos1_xmm0556180401_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Feb 27 04:43:37 2012] fullrun_mos1_xmm0556180401_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Feb 27 04:43:37 2012] Fit fullrun_mos1_xmm0556180401_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Feb 27 05:07:58 2012] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 16.698568 pixels away
[Mon Feb 27 05:07:58 2012] Vigneting correction estimate = 1.000000
[Mon Feb 27 05:07:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Feb 27 05:07:58 2012] Assessing source extent using major
[Mon Feb 27 05:07:58 2012] Source does appear to be extended
[Mon Feb 27 05:07:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Feb 27 05:39:05 2012] XMMSAS src. selection expression = ellipse(11417.713959, 34061.718079, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Feb 27 05:39:05 2012] Writing source region out to fullrun_mos1_xmm0556180401_pi300-10000_pass1_cl_src1_src.reg
[Mon Feb 27 05:39:05 2012] Extracting stamp from image fullrun_mos1_xmm0556180401_pi300-10000_cl_sm2.00.img.gz, (94, 355) - (169, 430)
[Mon Feb 27 05:39:05 2012] XMMSAS bgd. selection expression = annulus(11417.713959, 34061.718079, 1087.500000, 2175.000000, X, Y)
[Mon Feb 27 05:39:05 2012] Writing fullrun_mos1_xmm0556180401_pi300-10000_pass1_cl_src1.gif
[Mon Feb 27 05:39:29 2012] Mean detx,y = (9765.67, -13638.69) 
[Mon Feb 27 05:39:31 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Feb 27 05:40:01 2012] Binned source spectrum to 10 counts/bin
[Mon Feb 27 05:40:02 2012] Setting source spectrum file to fullrun_mos1_xmm0556180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 27 05:40:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0556180401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Feb 27 05:46:58 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Feb 27 05:46:58 2012] rmf not generated due to insufficient counts
[Mon Feb 27 05:54:39 2012] Updating aperture counts using extracted products
[Mon Feb 27 05:54:39 2012] Error reading totcts from fullrun_mos1_xmm0556180401_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Feb 27 05:54:40 2012] Calculating source flux in energy range 0.30-8.00
[Mon Feb 27 05:54:40 2012] Using photon index=1.80, rate=0.00853, arf fullrun_mos1_xmm0556180401_pi300-10000_pass1_cl_src1.arf
[Mon Feb 27 05:54:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Feb 27 05:54:40 2012] Updating source flux to 2.7e-13
[Mon Feb 27 05:54:42 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting