[Sun Mar  4 10:10:01 2012] Detection parameters:
  Position = (191.2, 288.3) = 22 20 11.12 -20 21 17.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.4 +/- 10.8
  Background counts = 25.7
  Rate = 0.006 +/- 0.001

[Sun Mar  4 10:10:01 2012] Off-axis axis estimate = 7.81'
[Sun Mar  4 10:26:27 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 10:26:27 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Sun Mar  4 10:26:27 2012] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.028
[Sun Mar  4 10:26:27 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.33"
[Sun Mar  4 10:33:19 2012] fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_src4.ximg exists
[Sun Mar  4 10:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_src4.csv
[Sun Mar  4 10:33:19 2012] fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun Mar  4 10:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_src4.csv
[Sun Mar  4 10:33:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 10:33:19 2012] fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun Mar  4 10:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Mar  4 10:33:19 2012] fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun Mar  4 10:33:19 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sun Mar  4 10:33:19 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556180201_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Mar  4 10:39:17 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 10.235877 pixels away
[Sun Mar  4 10:39:17 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 10:39:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 10:39:17 2012] Assessing source extent using major
[Sun Mar  4 10:39:17 2012] Source does appear to be extended
[Sun Mar  4 10:39:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 10:55:49 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Sun Mar  4 10:55:49 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Sun Mar  4 10:55:49 2012] source mask rpix=2.4, npix_max = 33, mask sum = 34, frac = 1.028
[Sun Mar  4 10:55:49 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.33"
[Sun Mar  4 11:03:30 2012] fullrun_mos1_xmm0556180201_pi300-10000_cl_pass1_src4.ximg exists
[Sun Mar  4 11:03:30 2012] fullrun_mos1_xmm0556180201_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun Mar  4 11:03:30 2012] Fit fullrun_mos1_xmm0556180201_pi300-10000_cl_pass1_src4 appears to have run properly
[Sun Mar  4 11:03:30 2012] fullrun_mos1_xmm0556180201_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun Mar  4 11:03:30 2012] fullrun_mos1_xmm0556180201_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun Mar  4 11:03:30 2012] Fit fullrun_mos1_xmm0556180201_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun Mar  4 11:08:45 2012] Spatial fit model total counts = 82.875200, observed total counts = 75.000000
[Sun Mar  4 11:08:45 2012] Offset between fit and detection position for source 4 = 0.845428 pixels
[Sun Mar  4 11:08:45 2012] 84.459300 total counts/ 58.020300 bgd. counts: snr = 3.471003
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.845428 pixels
  Position = (190.7, 288.9) = 22 20 11.29 -20 21 15.6
  Extent = 5.0 (3.4-7.4)", rotation angle = 0
  Source counts = 26.4 +/- 9.2
  Background counts = 58.0
  Rate = 0.003 +/- 0.001
[Sun Mar  4 11:08:45 2012] Vigneting correction estimate = 1.000000
[Sun Mar  4 11:08:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Mar  4 11:08:45 2012] Assessing source extent using major axis lower bound
[Sun Mar  4 11:08:45 2012] Source does appear to be extended
[Sun Mar  4 11:08:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Mar  4 11:22:18 2012] XMMSAS src. selection expression = ellipse(16540.851200, 25089.301780, 302.064609, 302.064609, 0.000000, X, Y)
[Sun Mar  4 11:22:18 2012] Writing source region out to fullrun_mos1_xmm0556180201_pi300-10000_pass1_cl_src4_src.reg
[Sun Mar  4 11:22:18 2012] Extracting stamp from image fullrun_mos1_xmm0556180201_pi300-10000_cl_sm2.00.img.gz, (173, 272) - (208, 306)
[Sun Mar  4 11:22:18 2012] XMMSAS bgd. selection expression = annulus(16540.851200, 25089.301780, 503.441014, 1006.882029, X, Y)
[Sun Mar  4 11:22:18 2012] Writing fullrun_mos1_xmm0556180201_pi300-10000_pass1_cl_src4.gif
[Sun Mar  4 11:22:49 2012] Mean detx,y = (3177.30, 6859.22) 
[Sun Mar  4 11:22:49 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Mar  4 11:22:57 2012] Binned source spectrum to 10 counts/bin
[Sun Mar  4 11:22:58 2012] Setting source spectrum file to fullrun_mos1_xmm0556180201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar  4 11:22:58 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0556180201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun Mar  4 11:30:23 2012] Not generating rmf since there are only 26 counts
[Sun Mar  4 11:30:23 2012] rmf not generated due to insufficient counts
[Sun Mar  4 11:37:00 2012] Updating aperture counts using extracted products
[Sun Mar  4 11:37:00 2012] Error reading totcts from fullrun_mos1_xmm0556180201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun Mar  4 11:37:00 2012] Calculating source flux in energy range 0.30-8.00
[Sun Mar  4 11:37:00 2012] Using photon index=1.80, rate=0.003, arf fullrun_mos1_xmm0556180201_pi300-10000_pass1_cl_src4.arf
[Sun Mar  4 11:37:00 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Mar  4 11:37:00 2012] Updating source flux to 4.9e-14
[Sun Mar  4 11:37:01 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting