[Tue May 22 14:35:04 2012] Detection parameters:
  Position = (318.4, 321.1) = 16 31 56.67 -47 52 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.8 +/- 14.8
  Background counts = 15.1
  Rate = 0.009 +/- 0.002

[Tue May 22 14:35:04 2012] Off-axis axis estimate = 2.19'
[Tue May 22 16:49:37 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Tue May 22 16:49:37 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Tue May 22 16:49:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.006
[Tue May 22 16:49:37 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.52"
[Tue May 22 17:20:53 2012] fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 22 17:20:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_src5.csv
[Tue May 22 17:20:53 2012] fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 22 17:20:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_src5.csv
[Tue May 22 17:20:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 17:20:53 2012] fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 22 17:20:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May 22 17:20:53 2012] fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 22 17:20:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_tfrozen_src5.csv
[Tue May 22 17:20:53 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556141001_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 17:21:11 2012] Warning, spatial fit 5 centroid is now closest to src. 2
[Tue May 22 17:21:11 2012] Vigneting correction estimate = 1.000000
[Tue May 22 17:21:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 17:21:11 2012] Assessing source extent using major
[Tue May 22 17:21:11 2012] Source does appear to be extended
[Tue May 22 17:21:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 19:09:12 2012] Using EEF radius (= 7.52 ")to estimate initial spatial extent for simple fitting
[Tue May 22 19:09:12 2012] Initial guess for spatial extent in simple fitting = 7.52"
[Tue May 22 19:09:12 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.006
[Tue May 22 19:09:12 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.52"
[Tue May 22 19:33:10 2012] fullrun_mos2_xmm0556141001_pi300-10000_cl_pass1_src5.ximg exists
[Tue May 22 19:33:10 2012] fullrun_mos2_xmm0556141001_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue May 22 19:33:10 2012] Fit fullrun_mos2_xmm0556141001_pi300-10000_cl_pass1_src5 appears to have run properly
[Tue May 22 19:33:10 2012] fullrun_mos2_xmm0556141001_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue May 22 19:33:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556141001_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue May 22 19:33:10 2012] fullrun_mos2_xmm0556141001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 22 19:33:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556141001_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue May 22 19:33:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556141001_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556141001_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 22 19:33:22 2012] Source 5 is offset by 7.445874 and 0.694755 pixels which is larger than
2 X fitted extent = 7.053747 x 7.053627, not incorporating fit results
[Tue May 22 19:33:22 2012] Vigneting correction estimate = 1.000000
[Tue May 22 19:33:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 22 19:33:22 2012] Assessing source extent using major
[Tue May 22 19:33:22 2012] Source does appear to be extended
[Tue May 22 19:33:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 22 21:48:03 2012] XMMSAS src. selection expression = ellipse(27652.312744, 27884.980927, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 22 21:48:03 2012] Writing source region out to fullrun_mos2_xmm0556141001_pi300-10000_pass1_cl_src5_src.reg
[Tue May 22 21:48:03 2012] Extracting stamp from image fullrun_mos2_xmm0556141001_pi300-10000_cl_sm2.00.img.gz, (281, 284) - (356, 359)
[Tue May 22 21:48:03 2012] XMMSAS bgd. selection expression = annulus(27652.312744, 27884.980927, 1087.500000, 2175.000000, X, Y) && !ellipse(26611.667000, 27783.604400, 504.229615, 504.229615, 0.000000, X, Y) && !ellipse(26246.686000, 27377.686000, 1086.376031, 748.996022, 4.847980, X, Y) && !ellipse(27272.064758, 28494.472107, 870.000000, 870.000000, 0.000000, X, Y)
[Tue May 22 21:48:03 2012] Writing fullrun_mos2_xmm0556141001_pi300-10000_pass1_cl_src5.gif
[Tue May 22 21:50:19 2012] Mean detx,y = (-795.78, -110.30) 
[Tue May 22 21:50:21 2012] Setting backscal keywords in source and bgd. spectrum
[Tue May 22 21:50:38 2012] Binned source spectrum to 10 counts/bin
[Tue May 22 21:50:38 2012] Setting source spectrum file to fullrun_mos2_xmm0556141001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 22 21:50:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556141001_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Tue May 22 22:02:00 2012] Not generating rmf since there are only 78 counts
[Tue May 22 22:02:00 2012] rmf not generated due to insufficient counts
[Tue May 22 22:02:42 2012] Updating aperture counts using extracted products
[Tue May 22 22:02:42 2012] Error reading totcts from fullrun_mos2_xmm0556141001_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Tue May 22 22:02:43 2012] Calculating source flux in energy range 0.30-8.00
[Tue May 22 22:02:43 2012] Using photon index=1.80, rate=0.00921, arf fullrun_mos2_xmm0556141001_pi300-10000_pass1_cl_src5.arf
[Tue May 22 22:02:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 22 22:02:43 2012] Updating source flux to 8.7e-14
[Tue May 22 22:03:51 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting