[Mon May 21 04:57:24 2012] Detection parameters:
  Position = (311.5, 334.3) = 16 32 1.14 -47 51 22.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 89.0 +/- 15.4
  Background counts = 25.0
  Rate = 0.01 +/- 0.002

[Mon May 21 04:57:25 2012] Off-axis axis estimate = 2.76'
[Mon May 21 04:59:07 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Mon May 21 04:59:07 2012] Initial guess for spatial extent in simple fitting = 7.81"
[Mon May 21 04:59:07 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.902
[Mon May 21 04:59:07 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.81"
[Mon May 21 06:05:14 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src13.ximg exists
[Mon May 21 06:05:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src13.csv
[Mon May 21 06:05:14 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src13_1.ximg exists
[Mon May 21 06:05:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src13.csv
[Mon May 21 06:05:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 06:05:14 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Mon May 21 06:05:14 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Mon May 21 06:05:14 2012] Fit fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Mon May 21 07:11:02 2012] Source 14 is offset by -0.464841 and -7.905196 pixels which is larger than
2 X fitted extent = 0.897710 x 0.897710, not incorporating fit results
[Mon May 21 07:11:02 2012] Vigneting correction estimate = 1.000000
[Mon May 21 07:11:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 07:11:02 2012] Assessing source extent using major
[Mon May 21 07:11:02 2012] Source does appear to be extended
[Mon May 21 07:11:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 07:11:02 2012] Source is confused with source 13
[Mon May 21 07:11:13 2012] Using EEF radius (= 7.81 ")to estimate initial spatial extent for simple fitting
[Mon May 21 07:11:13 2012] Initial guess for spatial extent in simple fitting = 7.81"
[Mon May 21 07:11:13 2012] source mask rpix=1.8, npix_max = 21, mask sum = 19, frac = 0.902
[Mon May 21 07:11:13 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 7.81"
[Mon May 21 08:22:32 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src11.ximg exists
[Mon May 21 08:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src11.csv
[Mon May 21 08:22:32 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon May 21 08:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src11.csv
[Mon May 21 08:22:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 08:22:32 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon May 21 08:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 21 08:22:32 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon May 21 08:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src11.csv
[Mon May 21 08:22:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 09:06:40 2012] Source 14 is offset by 4.833807 and -5.366322 pixels which is larger than
2 X fitted extent = 0.577053 x 0.577053, not incorporating fit results
[Mon May 21 09:06:40 2012] Vigneting correction estimate = 1.000000
[Mon May 21 09:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 09:06:40 2012] Assessing source extent using major
[Mon May 21 09:06:40 2012] Source does appear to be extended
[Mon May 21 09:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 09:06:56 2012] XMMSAS src. selection expression = ellipse(27049.289215, 29031.257965, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 21 09:06:56 2012] Writing source region out to fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src14_src.reg
[Mon May 21 09:06:56 2012] Extracting stamp from image fullrun_pn_xmm0556140801_pi300-10000_cl_sm2.00.img.gz, (274, 297) - (349, 372)
[Mon May 21 09:06:56 2012] XMMSAS bgd. selection expression = annulus(27049.289215, 29031.257965, 1087.500000, 2175.000000, X, Y) && !ellipse(26918.895700, 27747.018200, 1473.499242, 1473.499242, 0.000000, X, Y) && !ellipse(25458.636000, 31845.675800, 914.856026, 914.856026, 0.000000, X, Y) && !ellipse(27556.960022, 29154.626556, 870.000000, 870.000000, 0.000000, X, Y)
[Mon May 21 09:06:56 2012] Writing fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src14.gif
[Mon May 21 09:20:34 2012] Mean detx,y = (290.71, -1383.81) 
[Mon May 21 09:20:38 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 09:21:01 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 09:21:01 2012] Setting source spectrum file to fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 21 09:21:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Mon May 21 10:19:30 2012] Not generating rmf since there are only 88 counts
[Mon May 21 10:19:30 2012] rmf not generated due to insufficient counts
[Mon May 21 12:09:12 2012] Updating aperture counts using extracted products
[Mon May 21 12:09:12 2012] Error reading totcts from fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Mon May 21 12:09:14 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 12:09:14 2012] Using photon index=1.80, rate=0.0134, arf fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src14.arf
[Mon May 21 12:09:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 12:09:14 2012] Updating source flux to 3.9e-14
[Mon May 21 12:12:05 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting