[Mon May 21 04:57:24 2012] Detection parameters:
  Position = (310.1, 319.7) = 16 32 1.72 -47 52 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42442.1 +/- 243.9
  Background counts = 26.1
  Rate = 5 +/- 0.03

[Mon May 21 04:57:25 2012] Off-axis axis estimate = 1.76'
[Mon May 21 04:59:07 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Mon May 21 04:59:07 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Mon May 21 04:59:07 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.841
[Mon May 21 04:59:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Mon May 21 06:05:14 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 21 06:05:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src1.csv
[Mon May 21 06:05:14 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 21 06:05:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src1.csv
[Mon May 21 06:05:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 06:05:14 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 21 06:05:14 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 21 06:05:14 2012] Fit fullrun_pn_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon May 21 07:11:02 2012] Spatial fit model total counts = 40284.800000, observed total counts = 39469.000000
[Mon May 21 07:11:02 2012] Offset between fit and detection position for source 1 = 0.278818 pixels
[Mon May 21 07:11:02 2012] 40355.900000 total counts/ 10013.700000 bgd. counts: snr = 303.214369
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.278818 pixels
  Position = (310.0, 319.5) = 16 32 1.78 -47 52 27.5
  Extent = 6.1 (6.0-6.1)", rotation angle = 0
  Source counts = 30342.2 +/- 200.9
  Background counts = 10013.7
  Rate = 3 +/- 0.02
[Mon May 21 07:11:02 2012] Vigneting correction estimate = 1.000000
[Mon May 21 07:11:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 07:11:02 2012] Assessing source extent using major axis lower bound
[Mon May 21 07:11:02 2012] Source does appear to be extended
[Mon May 21 07:11:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 07:11:13 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 21 07:11:13 2012] Initial guess for spatial extent in simple fitting = 6.08"
[Mon May 21 07:11:13 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.832
[Mon May 21 07:11:13 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.08"
[Mon May 21 08:22:32 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 21 08:22:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src1.csv
[Mon May 21 08:22:32 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 21 08:22:32 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src1.csv
[Mon May 21 08:22:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 08:22:32 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 21 08:22:32 2012] fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 21 08:22:32 2012] Fit fullrun_pn_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 21 09:06:40 2012] Spatial fit model total counts = 39945.700000, observed total counts = 39655.000000
[Mon May 21 09:06:40 2012] Offset between fit and detection position for source 1 = 0.009018 pixels
[Mon May 21 09:06:40 2012] 40097.000000 total counts/ 9548.500000 bgd. counts: snr = 312.623999
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.009018 pixels
  Position = (310.0, 319.5) = 16 32 1.78 -47 52 27.5
  Extent = 6.1 (6.1-6.2)", rotation angle = 0
  Source counts = 30548.5 +/- 200.2
  Background counts = 9548.5
  Rate = 3 +/- 0.02
[Mon May 21 09:06:40 2012] Vigneting correction estimate = 1.000000
[Mon May 21 09:06:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 09:06:40 2012] Assessing source extent using major axis lower bound
[Mon May 21 09:06:40 2012] Source does appear to be extended
[Mon May 21 09:06:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 09:06:55 2012] Counts = 30548.500000, rescaling region sizes by 3.000000
[Mon May 21 09:06:55 2012] XMMSAS src. selection expression = ellipse(26918.895700, 27747.018200, 1105.124432, 1105.124432, 0.000000, X, Y)
[Mon May 21 09:06:55 2012] Writing source region out to fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src1_src.reg
[Mon May 21 09:06:55 2012] Extracting stamp from image fullrun_pn_xmm0556140801_pi300-10000_cl_sm2.00.img.gz, (246, 256) - (373, 383)
[Mon May 21 09:06:55 2012] XMMSAS bgd. selection expression = annulus(26918.895700, 27747.018200, 5525.622159, 11051.244318, X, Y) && !ellipse(23137.406219, 33538.573761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23547.342743, 20154.710464, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17489.699585, 36589.082947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24788.297000, 36718.195200, 458.017613, 458.017613, 0.000000, X, Y) && !ellipse(25458.636000, 31845.675800, 914.856026, 914.856026, 0.000000, X, Y) && !ellipse(27556.960022, 29154.626556, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27049.289215, 29031.257965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21831.478600, 25546.081200, 397.533611, 397.533611, 0.000000, X, Y) && !ellipse(27174.663814, 25076.052455, 1467.472042, 302.872900, 88.704846, X, Y) && !ellipse(27225.802326, 24455.300296, 1521.504044, 310.835270, 81.736845, X, Y) && !ellipse(27237.945800, 24130.184000, 971.936028, 971.936028, 0.000000, X, Y) && !ellipse(27479.264400, 22799.010400, 1317.304038, 425.312812, 82.579220, X, Y) && !ellipse(27481.815200, 21982.249400, 854.904025, 854.904025, 0.000000, X, Y) && !ellipse(27548.727060, 21006.481400, 768.368822, 768.368822, 0.000000, X, Y) && !ellipse(22393.172000, 21097.564000, 1429.888041, 1429.888041, 0.000000, X, Y) && !ellipse(27577.837200, 20729.402000, 567.889616, 567.889616, 0.000000, X, Y) && !ellipse(27696.116240, 19710.554800, 1465.608042, 452.308013, 266.004000, X, Y) && !ellipse(27773.087372, 18578.000076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27858.192455, 17689.262787, 1939.248056, 372.596665, 83.811907, X, Y) && !ellipse(27941.565400, 16883.979400, 851.280024, 851.280024, 0.000000, X, Y) && !ellipse(28051.253475, 15868.474116, 1655.344048, 533.503198, 84.997761, X, Y)
[Mon May 21 09:06:55 2012] Writing fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src1.gif
[Mon May 21 09:07:08 2012] Mean detx,y = (113.11, -245.48) 
[Mon May 21 09:07:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 09:12:06 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 09:12:07 2012] Setting source spectrum file to fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 09:12:07 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 21 12:09:12 2012] Updating aperture counts using extracted products
[Mon May 21 12:09:12 2012] Error reading totcts from fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 12:09:13 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 12:09:13 2012] Using photon index=1.80, rate=3.17, arf fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src1.arf
[Mon May 21 12:09:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 12:09:13 2012] Updating source flux to 7.1e-12
[Mon May 21 12:16:48 2012] Reading fit data from xmm0556140801/analysis//spectral/fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 21 12:16:48 2012] Spectral fit parameter nH value = 2.60952e+23
[Mon May 21 12:16:48 2012] Spectral fit parameter PhoIndex value = 0.983456
[Mon May 21 12:16:48 2012] Failed to get F(0.3-8.0) from xmm0556140801/analysis//spectral/fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 21 12:16:48 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 12:16:48 2012] Using Nh = 2.6e+23, photon index=0.98, rate=3.17, arf fullrun_pn_xmm0556140801_pi300-10000_pass1_cl_src1.arf
[Mon May 21 12:16:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 12:16:48 2012] Updating source flux to 3.3e-11