[Mon May 21 04:58:02 2012] Detection parameters:
  Position = (310.2, 319.7) = 16 32 1.70 -47 52 27.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 11559.2 +/- 127.7
  Background counts = 11.8
  Rate = 1 +/- 0.01

[Mon May 21 04:58:03 2012] Off-axis axis estimate = 1.76'
[Mon May 21 06:16:57 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Mon May 21 06:16:57 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Mon May 21 06:16:57 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.631
[Mon May 21 06:16:57 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Mon May 21 07:10:55 2012] fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_src1.ximg exists
[Mon May 21 07:10:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_src1.csv
[Mon May 21 07:10:55 2012] fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon May 21 07:10:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_src1.csv
[Mon May 21 07:10:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 07:10:55 2012] fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon May 21 07:10:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 21 07:10:55 2012] fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon May 21 07:10:55 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src1.csv
[Mon May 21 07:10:55 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140801_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 07:11:06 2012] Warning, spatial fit 1 centroid is now closest to src. 13
[Mon May 21 07:11:06 2012] Spatial fit model total counts = 9938.350000, observed total counts = 10348.000000
[Mon May 21 07:11:06 2012] Offset between fit and detection position for source 1 = 0.179165 pixels
[Mon May 21 07:11:06 2012] Warning, changing simple spatial fit ID from 1 to 3
[Mon May 21 07:11:06 2012] 9627.340000 total counts/ 2729.040000 bgd. counts: snr = 132.049611
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.179165 pixels
  Position = (310.1, 319.6) = 16 32 1.73 -47 52 27.2
  Extent = 5.4 (5.3-5.5)", rotation angle = 0
  Source counts = 6898.3 +/- 98.1
  Background counts = 2729.0
  Rate = 0.6 +/- 0.009
[Mon May 21 07:11:06 2012] Vigneting correction estimate = 1.000000
[Mon May 21 07:11:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 07:11:06 2012] Assessing source extent using major axis lower bound
[Mon May 21 07:11:06 2012] Source does appear to be extended
[Mon May 21 07:11:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 07:11:06 2012] Source is confused with source 3
[Mon May 21 08:33:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon May 21 08:33:57 2012] Initial guess for spatial extent in simple fitting = 5.39"
[Mon May 21 08:33:57 2012] source mask rpix=1.2, npix_max = 12, mask sum = 9, frac = 0.743
[Mon May 21 08:33:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.39"
[Mon May 21 09:06:29 2012] fullrun_mos2_xmm0556140801_pi300-10000_cl_pass1_src1.ximg exists
[Mon May 21 09:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140801_pi300-10000_cl_pass1_src1.csv
[Mon May 21 09:06:29 2012] fullrun_mos2_xmm0556140801_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon May 21 09:06:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140801_pi300-10000_cl_pass1_src1.csv
[Mon May 21 09:06:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140801_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140801_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon May 21 09:06:29 2012] fullrun_mos2_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon May 21 09:06:29 2012] fullrun_mos2_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon May 21 09:06:29 2012] Fit fullrun_mos2_xmm0556140801_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon May 21 09:06:45 2012] Spatial fit model total counts = 11639.100000, observed total counts = 11251.000000
[Mon May 21 09:06:45 2012] Offset between fit and detection position for source 1 = 0.084076 pixels
[Mon May 21 09:06:45 2012] 11490.980000 total counts/ 3864.310000 bgd. counts: snr = 122.687121
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.084076 pixels
  Position = (310.1, 319.5) = 16 32 1.71 -47 52 27.5
  Extent = 5.7 (5.6-5.8)", rotation angle = 0
  Source counts = 7626.7 +/- 107.2
  Background counts = 3864.3
  Rate = 0.7 +/- 0.01
[Mon May 21 09:06:45 2012] Vigneting correction estimate = 1.000000
[Mon May 21 09:06:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon May 21 09:06:45 2012] Assessing source extent using major axis lower bound
[Mon May 21 09:06:45 2012] Source does appear to be extended
[Mon May 21 09:06:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 21 11:23:53 2012] Counts = 7626.670000, rescaling region sizes by 2.000000
[Mon May 21 11:23:53 2012] XMMSAS src. selection expression = ellipse(26932.855720, 27747.358800, 680.722820, 680.722820, 0.000000, X, Y)
[Mon May 21 11:23:53 2012] Writing source region out to fullrun_mos2_xmm0556140801_pi300-10000_pass1_cl_src1_src.reg
[Mon May 21 11:23:53 2012] Extracting stamp from image fullrun_mos2_xmm0556140801_pi300-10000_cl_sm2.00.img.gz, (271, 280) - (349, 359)
[Mon May 21 11:23:53 2012] XMMSAS bgd. selection expression = annulus(26932.855720, 27747.358800, 2269.076065, 4538.152131, X, Y) && !ellipse(26526.341370, 27685.901520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.092000, 27667.312000, 1113.720032, 1113.720032, 0.000000, X, Y)
[Mon May 21 11:23:53 2012] Writing fullrun_mos2_xmm0556140801_pi300-10000_pass1_cl_src1.gif
[Mon May 21 11:23:57 2012] Mean detx,y = (34.55, 115.67) 
[Mon May 21 11:23:59 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 21 11:24:29 2012] Binned source spectrum to 10 counts/bin
[Mon May 21 11:24:30 2012] Setting source spectrum file to fullrun_mos2_xmm0556140801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 11:24:30 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556140801_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 21 12:09:15 2012] Updating aperture counts using extracted products
[Mon May 21 12:09:15 2012] Error reading totcts from fullrun_mos2_xmm0556140801_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 21 12:09:15 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 12:09:15 2012] Using photon index=1.80, rate=0.68, arf fullrun_mos2_xmm0556140801_pi300-10000_pass1_cl_src1.arf
[Mon May 21 12:09:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 12:09:15 2012] Updating source flux to 7.1e-12
[Mon May 21 12:10:14 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Mon May 21 12:12:05 2012] Reading fit data from xmm0556140801/analysis//spectral/fullrun_mos2_xmm0556140801_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 21 12:12:05 2012] Spectral fit parameter nH value = 2.64277e+23
[Mon May 21 12:12:05 2012] Spectral fit parameter PhoIndex value = 0.985406
[Mon May 21 12:12:05 2012] Failed to get F(0.3-8.0) from xmm0556140801/analysis//spectral/fullrun_mos2_xmm0556140801_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 21 12:12:05 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 21 12:12:05 2012] Using Nh = 2.6e+23, photon index=0.99, rate=0.68, arf fullrun_mos2_xmm0556140801_pi300-10000_pass1_cl_src1.arf
[Mon May 21 12:12:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 21 12:12:05 2012] Updating source flux to 3.1e-11