[Sun Jul  8 10:12:42 2012] Detection parameters:
  Position = (285.9, 420.6) = 16 32 12.10 -47 44 57.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.1 +/- 11.7
  Background counts = 19.0
  Rate = 0.005 +/- 0.0009

[Sun Jul  8 10:12:43 2012] Off-axis axis estimate = 8.91'
[Sun Jul  8 10:14:53 2012] Using EEF radius (= 10.88 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 10:14:53 2012] Initial guess for spatial extent in simple fitting = 10.88"
[Sun Jul  8 10:14:53 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.999
[Sun Jul  8 10:14:53 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.88"
[Sun Jul  8 11:59:31 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src7.ximg exists
[Sun Jul  8 11:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src7.csv
[Sun Jul  8 11:59:31 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Jul  8 11:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src7.csv
[Sun Jul  8 11:59:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 11:59:31 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Jul  8 11:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Jul  8 11:59:31 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Jul  8 11:59:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sun Jul  8 11:59:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 12:53:29 2012] Spatial fit model total counts = 389.327000, observed total counts = 306.000000
[Sun Jul  8 12:53:29 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Jul  8 12:53:29 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 12:53:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 12:53:29 2012] Assessing source extent using major
[Sun Jul  8 12:53:29 2012] Source does appear to be extended
[Sun Jul  8 12:53:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 12:53:29 2012] Deleting source due to low Poisson probability 0.9