[Sun Jul  8 10:12:42 2012] Detection parameters:
  Position = (310.3, 317.2) = 16 32 1.59 -47 52 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107440.2 +/- 383.8
  Background counts = 36.6
  Rate = 1e+01 +/- 0.04

[Sun Jul  8 10:12:43 2012] Off-axis axis estimate = 1.61'
[Sun Jul  8 10:14:53 2012] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 10:14:53 2012] Initial guess for spatial extent in simple fitting = 7.23"
[Sun Jul  8 10:14:53 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.855
[Sun Jul  8 10:14:53 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.23"
[Sun Jul  8 11:59:31 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul  8 11:59:31 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src1.csv
[Sun Jul  8 11:59:31 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul  8 11:59:31 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src1.csv
[Sun Jul  8 11:59:31 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 11:59:31 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul  8 11:59:31 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul  8 11:59:31 2012] Fit fullrun_pn_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul  8 12:53:29 2012] Spatial fit model total counts = 102426.000000, observed total counts = 102426.000000
[Sun Jul  8 12:53:29 2012] Offset between fit and detection position for source 1 = 0.287065 pixels
[Sun Jul  8 12:53:29 2012] 102839.600000 total counts/ 23371.500000 bgd. counts: snr = 519.815872
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.287065 pixels
  Position = (310.2, 317.5) = 16 32 1.65 -47 52 27.5
  Extent = 6.5 (6.5-6.6)", rotation angle = 0
  Source counts = 79468.1 +/- 320.7
  Background counts = 23371.5
  Rate = 6 +/- 0.03
[Sun Jul  8 12:53:29 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 12:53:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 12:53:29 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 12:53:29 2012] Source does appear to be extended
[Sun Jul  8 12:53:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 12:53:40 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul  8 12:53:40 2012] Initial guess for spatial extent in simple fitting = 6.53"
[Sun Jul  8 12:53:40 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.998
[Sun Jul  8 12:53:40 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.53"
[Sun Jul  8 14:32:00 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul  8 14:32:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140601_pi300-10000_cl_pass1_src1.csv
[Sun Jul  8 14:32:00 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul  8 14:32:00 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140601_pi300-10000_cl_pass1_src1.csv
[Sun Jul  8 14:32:00 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140601_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140601_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 14:32:00 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul  8 14:32:00 2012] fullrun_pn_xmm0556140601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul  8 14:32:01 2012] Fit fullrun_pn_xmm0556140601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul  8 15:36:01 2012] Spatial fit model total counts = 102426.000000, observed total counts = 102426.000000
[Sun Jul  8 15:36:01 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Sun Jul  8 15:36:01 2012] 102839.600000 total counts/ 23371.500000 bgd. counts: snr = 519.815872
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (310.2, 317.5) = 16 32 1.65 -47 52 27.5
  Extent = 6.5 (6.5-6.6)", rotation angle = 0
  Source counts = 79468.1 +/- 320.7
  Background counts = 23371.5
  Rate = 6 +/- 0.03
[Sun Jul  8 15:36:01 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 15:36:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 15:36:01 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 15:36:01 2012] Source does appear to be extended
[Sun Jul  8 15:36:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 15:36:10 2012] Counts = 79468.100000, rescaling region sizes by 3.000000
[Sun Jul  8 15:36:10 2012] XMMSAS src. selection expression = ellipse(26934.846620, 27572.461000, 1175.920234, 1175.920234, 0.000000, X, Y)
[Sun Jul  8 15:36:10 2012] Writing source region out to fullrun_pn_xmm0556140601_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul  8 15:36:10 2012] Extracting stamp from image fullrun_pn_xmm0556140601_pi300-10000_cl_sm2.00.img.gz, (243, 250) - (378, 385)
[Sun Jul  8 15:36:10 2012] XMMSAS bgd. selection expression = annulus(26934.846620, 27572.461000, 5879.601169, 11759.202338, X, Y) && !ellipse(23305.679321, 33499.733337, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17505.807648, 36411.950012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36750.901672, 40146.110657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25421.438000, 31751.784000, 1381.208040, 1381.208040, 0.000000, X, Y) && !ellipse(25462.266000, 31716.470000, 1423.680041, 1423.680041, 0.000000, X, Y) && !ellipse(26096.181488, 31201.996643, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27664.958649, 29064.623718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27186.418823, 29004.874939, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26614.777740, 28971.004730, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25960.964000, 28830.686800, 1237.536036, 1237.536036, -0.000000, X, Y) && !ellipse(27061.382400, 26016.836000, 1108.288032, 1108.288032, 0.000000, X, Y) && !ellipse(27104.120860, 24697.748400, 904.760026, 904.760026, 0.000000, X, Y) && !ellipse(27135.087173, 24312.876390, 1236.496036, 499.080874, 84.741973, X, Y) && !ellipse(27218.209800, 23145.139000, 1236.496036, 433.628812, 84.792830, X, Y) && !ellipse(27272.008040, 22312.588195, 1336.016038, 433.839117, 82.506255, X, Y) && !ellipse(27325.623800, 21704.001400, 1336.016038, 450.452013, 83.147530, X, Y) && !ellipse(27355.937006, 21070.238413, 1414.224041, 437.431794, 86.862174, X, Y) && !ellipse(27376.358060, 20507.066000, 1414.224041, 469.339214, 84.491180, X, Y) && !ellipse(27480.117600, 19717.138800, 716.230421, 716.230421, 0.000000, X, Y) && !ellipse(27456.262940, 19313.956400, 1489.608043, 374.280011, 86.806000, X, Y) && !ellipse(27487.346185, 18710.024158, 1529.768044, 499.360327, 84.663796, X, Y) && !ellipse(27562.588684, 17787.804947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27589.741669, 17352.587234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23525.133423, 17096.854813, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27632.706560, 16627.644800, 1014.408029, 1014.408029, 0.000000, X, Y) && !ellipse(27719.535774, 15315.563010, 1874.424054, 450.967990, 85.723029, X, Y) && !ellipse(27710.375580, 15003.751846, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jul  8 15:36:10 2012] Writing fullrun_pn_xmm0556140601_pi300-10000_pass1_cl_src1.gif
[Sun Jul  8 15:36:30 2012] Mean detx,y = (69.21, -106.69) 
[Sun Jul  8 15:36:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 15:40:23 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 15:40:23 2012] Setting source spectrum file to fullrun_pn_xmm0556140601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul  8 15:40:23 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556140601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul  8 18:10:13 2012] Updating aperture counts using extracted products
[Sun Jul  8 18:10:13 2012] Error reading totcts from fullrun_pn_xmm0556140601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul  8 18:10:13 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 18:10:13 2012] Using photon index=1.80, rate=6.41, arf fullrun_pn_xmm0556140601_pi300-10000_pass1_cl_src1.arf
[Sun Jul  8 18:10:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 18:10:13 2012] Updating source flux to 1.4e-11
[Sun Jul  8 18:15:05 2012] Reading fit data from xmm0556140601/analysis//spectral/fullrun_pn_xmm0556140601_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul  8 18:15:05 2012] Spectral fit parameter nH value = 2.55356e+23
[Sun Jul  8 18:15:05 2012] Spectral fit parameter PhoIndex value = 0.708438
[Sun Jul  8 18:15:05 2012] Failed to get F(0.3-8.0) from xmm0556140601/analysis//spectral/fullrun_pn_xmm0556140601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul  8 18:15:05 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 18:15:05 2012] Using Nh = 2.6e+23, photon index=0.71, rate=6.41, arf fullrun_pn_xmm0556140601_pi300-10000_pass1_cl_src1.arf
[Sun Jul  8 18:15:05 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 18:15:05 2012] Updating source flux to 6.5e-11