[Sun Jul  8 10:13:01 2012] Detection parameters:
  Position = (310.0, 317.1) = 16 32 1.72 -47 52 28.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23357.9 +/- 184.8
  Background counts = 18.7
  Rate = 2 +/- 0.01

[Sun Jul  8 10:13:01 2012] Off-axis axis estimate = 1.59'
[Sun Jul  8 11:59:32 2012] Using EEF radius (= 7.22 ")to estimate initial spatial extent for simple fitting
[Sun Jul  8 11:59:32 2012] Initial guess for spatial extent in simple fitting = 7.22"
[Sun Jul  8 11:59:32 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.857
[Sun Jul  8 11:59:32 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.22"
[Sun Jul  8 12:14:03 2012] fullrun_mos1_xmm0556140601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jul  8 12:14:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556140601_pi300-10000_cl_pass0_src1.csv
[Sun Jul  8 12:14:03 2012] fullrun_mos1_xmm0556140601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jul  8 12:14:03 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556140601_pi300-10000_cl_pass0_src1.csv
[Sun Jul  8 12:14:03 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556140601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556140601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jul  8 12:14:03 2012] fullrun_mos1_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jul  8 12:14:03 2012] fullrun_mos1_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jul  8 12:14:03 2012] Fit fullrun_mos1_xmm0556140601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jul  8 12:53:31 2012] Spatial fit model total counts = 25118.000000, observed total counts = 25113.000000
[Sun Jul  8 12:53:31 2012] Offset between fit and detection position for source 1 = 0.207235 pixels
[Sun Jul  8 12:53:31 2012] 25177.380000 total counts/ 6484.780000 bgd. counts: snr = 232.125092
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.207235 pixels
  Position = (309.9, 317.3) = 16 32 1.77 -47 52 28.5
  Extent = 8.2 (8.1-8.3)", rotation angle = 0
  Source counts = 18692.6 +/- 158.7
  Background counts = 6484.8
  Rate = 1 +/- 0.01
[Sun Jul  8 12:53:31 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 12:53:31 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 12:53:31 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 12:53:31 2012] Source does appear to be extended
[Sun Jul  8 12:53:31 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jul  8 14:32:01 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jul  8 14:32:01 2012] Initial guess for spatial extent in simple fitting = 8.18"
[Sun Jul  8 14:32:01 2012] source mask rpix=1.9, npix_max = 22, mask sum = 25, frac = 1.103
[Sun Jul  8 14:32:01 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.18"
[Sun Jul  8 14:39:12 2012] fullrun_mos1_xmm0556140601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jul  8 14:39:12 2012] fullrun_mos1_xmm0556140601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jul  8 14:39:13 2012] Fit fullrun_mos1_xmm0556140601_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Jul  8 14:39:13 2012] fullrun_mos1_xmm0556140601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jul  8 14:39:13 2012] fullrun_mos1_xmm0556140601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jul  8 14:39:13 2012] Fit fullrun_mos1_xmm0556140601_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Jul  8 15:36:02 2012] Spatial fit model total counts = 25113.000000, observed total counts = 25113.000000
[Sun Jul  8 15:36:02 2012] Offset between fit and detection position for source 1 = 0.001582 pixels
[Sun Jul  8 15:36:02 2012] 25172.560000 total counts/ 6483.660000 bgd. counts: snr = 232.099190
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.001582 pixels
  Position = (309.9, 317.3) = 16 32 1.77 -47 52 28.5
  Extent = 8.3 (8.2-8.4)" x 8.1 (7.9-8.2)", rotation angle = 26
  Source counts = 18688.9 +/- 158.7
  Background counts = 6483.7
  Rate = 1 +/- 0.01
[Sun Jul  8 15:36:02 2012] Vigneting correction estimate = 1.000000
[Sun Jul  8 15:36:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jul  8 15:36:02 2012] Assessing source extent using major axis lower bound
[Sun Jul  8 15:36:02 2012] Source does appear to be extended
[Sun Jul  8 15:36:02 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.99
[Sun Jul  8 17:33:11 2012] Counts = 18688.900000, rescaling region sizes by 3.000000
[Sun Jul  8 17:33:11 2012] XMMSAS src. selection expression = ellipse(26910.594700, 27553.405400, 1491.895843, 1453.516242, 26.135174, X, Y)
[Sun Jul  8 17:33:11 2012] Writing source region out to fullrun_mos1_xmm0556140601_pi300-10000_pass1_cl_src1_src.reg
[Sun Jul  8 17:33:11 2012] Extracting stamp from image fullrun_mos1_xmm0556140601_pi300-10000_cl_sm2.00.img.gz, (224, 232) - (396, 403)
[Sun Jul  8 17:33:11 2012] XMMSAS bgd. selection expression = annulus(26910.594700, 27553.405400, 7459.479215, 14918.958429, X, Y) && !ellipse(23295.345947, 33468.876587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17479.626404, 36402.593689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25677.188000, 31593.234000, 1420.008041, 1420.008041, 0.000000, X, Y)
[Sun Jul  8 17:33:11 2012] Writing fullrun_mos1_xmm0556140601_pi300-10000_pass1_cl_src1.gif
[Sun Jul  8 17:33:15 2012] Mean detx,y = (171.30, -265.21) 
[Sun Jul  8 17:33:17 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jul  8 17:37:14 2012] Binned source spectrum to 10 counts/bin
[Sun Jul  8 17:37:15 2012] Setting source spectrum file to fullrun_mos1_xmm0556140601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul  8 17:37:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0556140601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jul  8 18:10:14 2012] Updating aperture counts using extracted products
[Sun Jul  8 18:10:14 2012] Error reading totcts from fullrun_mos1_xmm0556140601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jul  8 18:10:14 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 18:10:14 2012] Using photon index=1.80, rate=1.33, arf fullrun_mos1_xmm0556140601_pi300-10000_pass1_cl_src1.arf
[Sun Jul  8 18:10:14 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 18:10:14 2012] Updating source flux to 1.1e-11
[Sun Jul  8 18:10:56 2012] Reading fit data from xmm0556140601/analysis//spectral/fullrun_mos1_xmm0556140601_pi300-10000_pass1_cl_src1_pl.csv
[Sun Jul  8 18:10:56 2012] Spectral fit parameter nH value = 2.72134e+23
[Sun Jul  8 18:10:56 2012] Spectral fit parameter PhoIndex value = 0.879312
[Sun Jul  8 18:10:56 2012] Failed to get F(0.3-8.0) from xmm0556140601/analysis//spectral/fullrun_mos1_xmm0556140601_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Jul  8 18:10:56 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jul  8 18:10:56 2012] Using Nh = 2.7e+23, photon index=0.88, rate=1.33, arf fullrun_mos1_xmm0556140601_pi300-10000_pass1_cl_src1.arf
[Sun Jul  8 18:10:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jul  8 18:10:56 2012] Updating source flux to 5.1e-11