[Sat Jun 16 21:50:42 2012] Detection parameters:
  Position = (320.7, 334.4) = 16 31 57.66 -47 51 18.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.1 +/- 7.9
  Background counts = 9.2
  Rate = 0.02 +/- 0.005

[Sat Jun 16 21:50:42 2012] Off-axis axis estimate = 3.07'
[Sat Jun 16 21:51:46 2012] Using EEF radius (= 7.96 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:51:46 2012] Initial guess for spatial extent in simple fitting = 7.96"
[Sat Jun 16 21:51:46 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.921
[Sat Jun 16 21:51:46 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.96"
[Sat Jun 16 22:05:42 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 16 22:05:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 22:05:42 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 16 22:05:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 22:05:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:05:42 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 16 22:05:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 16 22:05:42 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 16 22:05:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 16 22:05:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:40:11 2012] Source 5 is offset by 2.995282 and -6.996200 pixels which is larger than
2 X fitted extent = 1.005232 x 1.005232, not incorporating fit results
[Sat Jun 16 22:40:11 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 22:40:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 22:40:11 2012] Assessing source extent using major
[Sat Jun 16 22:40:11 2012] Source does appear to be extended
[Sat Jun 16 22:40:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 22:40:11 2012] Deleting source due to low Poisson probability 0.8