[Sat Jun 16 21:50:42 2012] Detection parameters:
  Position = (311.2, 318.8) = 16 32 1.78 -47 52 27.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8068.8 +/- 107.0
  Background counts = 9.4
  Rate = 4 +/- 0.06

[Sat Jun 16 21:50:42 2012] Off-axis axis estimate = 1.74'
[Sat Jun 16 21:51:46 2012] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 21:51:46 2012] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Jun 16 21:51:46 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sat Jun 16 21:51:46 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.30"
[Sat Jun 16 22:05:42 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src1.ximg exists
[Sat Jun 16 22:05:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 22:05:42 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Jun 16 22:05:42 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src1.csv
[Sat Jun 16 22:05:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:05:42 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Jun 16 22:05:42 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Jun 16 22:05:42 2012] Fit fullrun_pn_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Jun 16 22:40:11 2012] Spatial fit model total counts = 7361.470000, observed total counts = 7293.000000
[Sat Jun 16 22:40:11 2012] Offset between fit and detection position for source 1 = 0.248294 pixels
[Sat Jun 16 22:40:11 2012] 7394.760000 total counts/ 1760.970000 bgd. counts: snr = 134.253209
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.248294 pixels
  Position = (311.1, 318.6) = 16 32 1.84 -47 52 28.2
  Extent = 6.0 (5.9-6.2)", rotation angle = 0
  Source counts = 5633.8 +/- 86.0
  Background counts = 1761.0
  Rate = 3 +/- 0.04
[Sat Jun 16 22:40:11 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 22:40:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 22:40:11 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 22:40:11 2012] Source does appear to be extended
[Sat Jun 16 22:40:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 22:40:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Jun 16 22:40:17 2012] Initial guess for spatial extent in simple fitting = 6.02"
[Sat Jun 16 22:40:17 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.844
[Sat Jun 16 22:40:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.02"
[Sat Jun 16 22:43:53 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Jun 16 22:43:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140501_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 22:43:53 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Jun 16 22:43:53 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140501_pi300-10000_cl_pass1_src1.csv
[Sat Jun 16 22:43:53 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:43:53 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Jun 16 22:43:53 2012] fullrun_pn_xmm0556140501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Jun 16 22:43:53 2012] Fit fullrun_pn_xmm0556140501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Jun 16 23:03:07 2012] Spatial fit model total counts = 7359.090000, observed total counts = 7293.000000
[Sat Jun 16 23:03:07 2012] Offset between fit and detection position for source 1 = 0.000150 pixels
[Sat Jun 16 23:03:07 2012] 7392.210000 total counts/ 1749.370000 bgd. counts: snr = 134.913963
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000150 pixels
  Position = (311.1, 318.6) = 16 32 1.84 -47 52 28.2
  Extent = 6.1 (5.9-6.2)", rotation angle = 0
  Source counts = 5642.8 +/- 86.0
  Background counts = 1749.4
  Rate = 3 +/- 0.04
[Sat Jun 16 23:03:07 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 23:03:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 23:03:07 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 23:03:07 2012] Source does appear to be extended
[Sat Jun 16 23:03:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 23:03:12 2012] Counts = 5642.840000, rescaling region sizes by 2.000000
[Sat Jun 16 23:03:12 2012] XMMSAS src. selection expression = ellipse(27014.222580, 27665.892600, 726.151221, 726.151221, 0.000000, X, Y)
[Sat Jun 16 23:03:12 2012] Writing source region out to fullrun_pn_xmm0556140501_pi300-10000_pass1_cl_src1_src.reg
[Sat Jun 16 23:03:12 2012] Extracting stamp from image fullrun_pn_xmm0556140501_pi300-10000_cl_sm2.00.img.gz, (269, 277) - (353, 360)
[Sat Jun 16 23:03:12 2012] XMMSAS bgd. selection expression = annulus(27014.222580, 27665.892600, 2420.504070, 4841.008139, X, Y)
[Sat Jun 16 23:03:12 2012] Writing fullrun_pn_xmm0556140501_pi300-10000_pass1_cl_src1.gif
[Sat Jun 16 23:03:16 2012] Mean detx,y = (128.31, -223.44) 
[Sat Jun 16 23:03:18 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 16 23:04:20 2012] Binned source spectrum to 10 counts/bin
[Sat Jun 16 23:04:20 2012] Setting source spectrum file to fullrun_pn_xmm0556140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 23:04:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556140501_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun 16 23:24:17 2012] Updating aperture counts using extracted products
[Sat Jun 16 23:24:17 2012] Error reading totcts from fullrun_pn_xmm0556140501_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun 16 23:24:17 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 23:24:17 2012] Using photon index=1.80, rate=2.59, arf fullrun_pn_xmm0556140501_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 23:24:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 23:24:17 2012] Updating source flux to 6.1e-12
[Sat Jun 16 23:25:23 2012] Reading fit data from xmm0556140501/analysis//spectral/fullrun_pn_xmm0556140501_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun 16 23:25:23 2012] Spectral fit parameter nH value = 2.57906e+23
[Sat Jun 16 23:25:23 2012] Spectral fit parameter PhoIndex value = 0.889307
[Sat Jun 16 23:25:23 2012] Failed to get F(0.3-8.0) from xmm0556140501/analysis//spectral/fullrun_pn_xmm0556140501_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun 16 23:25:23 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun 16 23:25:23 2012] Using Nh = 2.6e+23, photon index=0.89, rate=2.59, arf fullrun_pn_xmm0556140501_pi300-10000_pass1_cl_src1.arf
[Sat Jun 16 23:25:23 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 16 23:25:23 2012] Updating source flux to 2.8e-11