[Sat Jun 16 21:51:15 2012] Detection parameters:
  Position = (219.3, 482.4) = 16 32 41.40 -47 40 34.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 28.1 +/- 6.5
  Background counts = 1.8
  Rate = 0.006 +/- 0.001

[Sat Jun 16 21:51:15 2012] Off-axis axis estimate = 14.52'
[Sat Jun 16 22:21:50 2012] Using EEF radius (= 13.69 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 22:21:50 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Jun 16 22:21:50 2012] Initial guess for spatial extent in simple fitting = 13.69"
[Sat Jun 16 22:21:50 2012] source mask rpix=3.1, npix_max = 53, mask sum = 49, frac = 0.921
[Sat Jun 16 22:21:50 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 13.69"
[Sat Jun 16 22:40:08 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src7.ximg exists
[Sat Jun 16 22:40:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src7.csv
[Sat Jun 16 22:40:08 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src7_1.ximg exists
[Sat Jun 16 22:40:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src7.csv
[Sat Jun 16 22:40:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:40:08 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sat Jun 16 22:40:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 16 22:40:08 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sat Jun 16 22:40:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Sat Jun 16 22:40:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:40:14 2012] Spatial fit model total counts = 39.631200, observed total counts = 35.000000
[Sat Jun 16 22:40:14 2012] Offset between fit and detection position for source 8 = 0.189888 pixels
[Sat Jun 16 22:40:14 2012] 38.912400 total counts/ 19.100500 bgd. counts: snr = 4.533188
Spatial fit parameters:
  Offset between fit and detection position for source 8 = 0.189888 pixels
  Position = (219.4, 482.5) = 16 32 41.34 -47 40 34.8
  Extent = 5.4 (3.9-6.9)", rotation angle = 0
  Source counts = 19.8 +/- 6.2
  Background counts = 19.1
  Rate = 0.004 +/- 0.001
[Sat Jun 16 22:40:14 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 22:40:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 22:40:14 2012] Assessing source extent using major axis lower bound
[Sat Jun 16 22:40:14 2012] Source does appear to be extended
[Sat Jun 16 22:40:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 22:40:14 2012] Deleting source due to low Poisson probability 0.9