[Sat Jun 16 21:51:15 2012] Detection parameters:
  Position = (320.6, 316.8) = 16 31 57.71 -47 52 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 34.9 +/- 9.6
  Background counts = 5.4
  Rate = 0.008 +/- 0.002

[Sat Jun 16 21:51:15 2012] Off-axis axis estimate = 2.09'
[Sat Jun 16 22:21:50 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 22:21:50 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Sat Jun 16 22:21:50 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.610
[Sat Jun 16 22:21:50 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.47"
[Sat Jun 16 22:40:08 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 16 22:40:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 22:40:08 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 16 22:40:08 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src5.csv
[Sat Jun 16 22:40:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 22:40:08 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 16 22:40:08 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 16 22:40:08 2012] Fit fullrun_mos2_xmm0556140501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sat Jun 16 22:40:14 2012] Source 6 is offset by 0.601575 and 5.352671 pixels which is larger than
2 X fitted extent = 9.010115 x 1.126262, not incorporating fit results
[Sat Jun 16 22:40:14 2012] Warning, spatial fit 5 centroid is now closest to src. 1
[Sat Jun 16 22:40:14 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 22:40:14 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 22:40:14 2012] Assessing source extent using major
[Sat Jun 16 22:40:14 2012] Source does appear to be extended
[Sat Jun 16 22:40:14 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 22:49:37 2012] Using EEF radius (= 7.47 ")to estimate initial spatial extent for simple fitting
[Sat Jun 16 22:49:37 2012] Initial guess for spatial extent in simple fitting = 7.47"
[Sat Jun 16 22:49:37 2012] source mask rpix=1.7, npix_max = 19, mask sum = 12, frac = 0.610
[Sat Jun 16 22:49:37 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.47"
[Sat Jun 16 23:03:05 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_src5.ximg exists
[Sat Jun 16 23:03:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_src5.csv
[Sat Jun 16 23:03:05 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Jun 16 23:03:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_src5.csv
[Sat Jun 16 23:03:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 23:03:05 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Jun 16 23:03:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 16 23:03:05 2012] fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Jun 16 23:03:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Sat Jun 16 23:03:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 16 23:03:08 2012] Source 6 is offset by -4.211007 and 3.574031 pixels which is larger than
2 X fitted extent = 3.573086 x 5.027678, not incorporating fit results
[Sat Jun 16 23:03:08 2012] Vigneting correction estimate = 1.000000
[Sat Jun 16 23:03:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 16 23:03:08 2012] Assessing source extent using major
[Sat Jun 16 23:03:08 2012] Source does appear to be extended
[Sat Jun 16 23:03:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 16 23:03:08 2012] Deleting source due to low Poisson probability 0.9