[Fri Aug 31 21:22:37 2012] Detection parameters:
  Position = (308.4, 332.9) = 16 32 2.93 -47 51 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 106.9 +/- 18.7
  Background counts = 30.6
  Rate = 0.02 +/- 0.003

[Fri Aug 31 21:22:37 2012] Off-axis axis estimate = 2.60'
[Fri Aug 31 21:23:54 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 21:23:54 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Fri Aug 31 21:23:54 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.916
[Fri Aug 31 21:23:54 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 7.73"
[Fri Aug 31 22:03:01 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_src13.ximg exists
[Fri Aug 31 22:03:01 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_src13_1.ximg exists
[Fri Aug 31 22:03:01 2012] Fit fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_src13 appears to have run properly
[Fri Aug 31 22:03:02 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Fri Aug 31 22:03:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Aug 31 22:03:02 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Fri Aug 31 22:03:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_tfrozen_src13.csv
[Fri Aug 31 22:03:02 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 22:57:00 2012] Source 14 is offset by 7.507477 and 5.933808 pixels which is larger than
2 X fitted extent = 7.068276 x 7.068276, not incorporating fit results
[Fri Aug 31 22:57:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 22:57:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 22:57:00 2012] Assessing source extent using major
[Fri Aug 31 22:57:00 2012] Source does appear to be extended
[Fri Aug 31 22:57:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 22:57:08 2012] Using EEF radius (= 7.73 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 22:57:08 2012] Initial guess for spatial extent in simple fitting = 7.73"
[Fri Aug 31 22:57:08 2012] source mask rpix=1.8, npix_max = 20, mask sum = 19, frac = 0.916
[Fri Aug 31 22:57:08 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 7.73"
[Fri Aug 31 23:29:16 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src9.ximg exists
[Fri Aug 31 23:29:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src9.csv
[Fri Aug 31 23:29:16 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Aug 31 23:29:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src9.csv
[Fri Aug 31 23:29:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 23:29:16 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Aug 31 23:29:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Aug 31 23:29:16 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Aug 31 23:29:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_tfrozen_src9.csv
[Fri Aug 31 23:29:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Sep  1 00:21:23 2012] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 35.082981 pixels away
[Sat Sep  1 00:21:23 2012] Spatial fit model total counts = 2253.500000, observed total counts = 1361.000000
[Sat Sep  1 00:21:23 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Sep  1 00:21:23 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 00:21:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 00:21:23 2012] Assessing source extent using major
[Sat Sep  1 00:21:23 2012] Source does appear to be extended
[Sat Sep  1 00:21:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 00:21:30 2012] XMMSAS src. selection expression = ellipse(26785.708527, 28910.799286, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Sep  1 00:21:30 2012] Writing source region out to fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src14_src.reg
[Sat Sep  1 00:21:30 2012] Extracting stamp from image fullrun_pn_xmm0556140401_pi300-10000_cl_sm2.00.img.gz, (271, 295) - (346, 370)
[Sat Sep  1 00:21:30 2012] XMMSAS bgd. selection expression = annulus(26785.708527, 28910.799286, 1087.500000, 2175.000000, X, Y) && !ellipse(26999.825500, 27660.375600, 1478.124043, 1478.124043, 0.000000, X, Y) && !ellipse(25581.740000, 31761.031200, 1425.928041, 1425.928041, 0.000000, X, Y) && !ellipse(27727.657166, 28996.960297, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep  1 00:21:30 2012] Writing fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src14.gif
[Sat Sep  1 00:32:00 2012] Mean detx,y = (-19.25, -1337.84) 
[Sat Sep  1 00:32:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 00:32:15 2012] grppha failed
[Sat Sep  1 00:32:15 2012] Setting source spectrum file to fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src14_src.pi.gz
[Sat Sep  1 00:32:15 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Sep  1 00:38:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Sep  1 00:38:41 2012] rmf not generated due to insufficient counts
[Sat Sep  1 00:40:40 2012] Updating aperture counts using extracted products
[Sat Sep  1 00:40:40 2012] Error reading totcts from fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src14_src.pi.gz
[Sat Sep  1 00:40:40 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 00:40:43 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Sep  1 00:40:44 2012] xmm0556140401/analysis//spectral/fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src14_pl.csv not found, spectral fit skipped or did not complete