[Fri Aug 31 21:22:37 2012] Detection parameters:
  Position = (311.0, 318.2) = 16 32 1.82 -47 52 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 49914.6 +/- 264.4
  Background counts = 31.9
  Rate = 5 +/- 0.03

[Fri Aug 31 21:22:37 2012] Off-axis axis estimate = 1.70'
[Fri Aug 31 21:23:54 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Fri Aug 31 21:23:54 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Fri Aug 31 21:23:54 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Fri Aug 31 21:23:54 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Fri Aug 31 22:03:01 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_src1.ximg exists
[Fri Aug 31 22:03:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_src1.csv
[Fri Aug 31 22:03:01 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Aug 31 22:03:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_src1.csv
[Fri Aug 31 22:03:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 22:03:02 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Aug 31 22:03:02 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Aug 31 22:03:02 2012] Fit fullrun_pn_xmm0556140401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Aug 31 22:57:00 2012] Spatial fit model total counts = 46488.900000, observed total counts = 46467.000000
[Fri Aug 31 22:57:00 2012] Offset between fit and detection position for source 1 = 0.271062 pixels
[Fri Aug 31 22:57:00 2012] 46652.400000 total counts/ 10504.400000 bgd. counts: snr = 352.694468
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.271062 pixels
  Position = (310.9, 318.5) = 16 32 1.87 -47 52 29.1
  Extent = 6.2 (6.1-6.2)", rotation angle = 0
  Source counts = 36148.0 +/- 216.0
  Background counts = 10504.4
  Rate = 3 +/- 0.02
[Fri Aug 31 22:57:00 2012] Vigneting correction estimate = 1.000000
[Fri Aug 31 22:57:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 31 22:57:00 2012] Assessing source extent using major axis lower bound
[Fri Aug 31 22:57:00 2012] Source does appear to be extended
[Fri Aug 31 22:57:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 31 22:57:08 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 31 22:57:08 2012] Initial guess for spatial extent in simple fitting = 6.16"
[Fri Aug 31 22:57:08 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.817
[Fri Aug 31 22:57:08 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.16"
[Fri Aug 31 23:29:16 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src1.ximg exists
[Fri Aug 31 23:29:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src1.csv
[Fri Aug 31 23:29:16 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Aug 31 23:29:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src1.csv
[Fri Aug 31 23:29:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 31 23:29:16 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Aug 31 23:29:16 2012] fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Aug 31 23:29:16 2012] Fit fullrun_pn_xmm0556140401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Sep  1 00:21:23 2012] Spatial fit model total counts = 46488.900000, observed total counts = 46467.000000
[Sat Sep  1 00:21:23 2012] Offset between fit and detection position for source 1 = 0.000000 pixels
[Sat Sep  1 00:21:23 2012] 46652.400000 total counts/ 10504.300000 bgd. counts: snr = 352.697123
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000000 pixels
  Position = (310.9, 318.5) = 16 32 1.87 -47 52 29.1
  Extent = 6.2 (6.1-6.2)", rotation angle = 0
  Source counts = 36148.1 +/- 216.0
  Background counts = 10504.3
  Rate = 3 +/- 0.02
[Sat Sep  1 00:21:23 2012] Vigneting correction estimate = 1.000000
[Sat Sep  1 00:21:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Sep  1 00:21:23 2012] Assessing source extent using major axis lower bound
[Sat Sep  1 00:21:23 2012] Source does appear to be extended
[Sat Sep  1 00:21:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Sep  1 00:21:30 2012] Counts = 36148.100000, rescaling region sizes by 3.000000
[Sat Sep  1 00:21:30 2012] XMMSAS src. selection expression = ellipse(26999.825500, 27660.375600, 1108.593032, 1108.593032, 0.000000, X, Y)
[Sat Sep  1 00:21:30 2012] Writing source region out to fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src1_src.reg
[Sat Sep  1 00:21:30 2012] Extracting stamp from image fullrun_pn_xmm0556140401_pi300-10000_cl_sm2.00.img.gz, (247, 255) - (375, 382)
[Sat Sep  1 00:21:30 2012] XMMSAS bgd. selection expression = annulus(26999.825500, 27660.375600, 5542.965159, 11085.930319, X, Y) && !ellipse(23379.430725, 33620.122986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17561.567245, 36491.746918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23604.837402, 20042.681503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33148.077362, 38121.188843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25581.740000, 31761.031200, 1425.928041, 1425.928041, 0.000000, X, Y) && !ellipse(27727.657166, 28996.960297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26785.708527, 28910.799286, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27128.634400, 25502.433400, 493.156814, 493.156814, 0.000000, X, Y) && !ellipse(27115.732200, 24795.852000, 1160.488033, 504.753615, 83.230900, X, Y) && !ellipse(27218.923400, 23669.472000, 899.360026, 899.360026, 0.000000, X, Y) && !ellipse(27231.047345, 23112.943111, 1666.960048, 532.793587, 84.232584, X, Y) && !ellipse(27330.580010, 21166.503020, 1666.960048, 309.865832, 83.191712, X, Y) && !ellipse(27323.220600, 21263.981600, 833.480024, 833.480024, 0.000000, X, Y) && !ellipse(27370.820620, 20269.494400, 948.384027, 948.384027, 0.000000, X, Y) && !ellipse(27439.172302, 18222.368195, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27477.430600, 17851.336200, 734.951221, 734.951221, 0.000000, X, Y) && !ellipse(27534.590000, 16997.117400, 1749.712050, 370.492011, 87.169480, X, Y) && !ellipse(27614.927277, 15863.918945, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Sep  1 00:21:30 2012] Writing fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src1.gif
[Sat Sep  1 00:21:40 2012] Mean detx,y = (112.54, -206.63) 
[Sat Sep  1 00:21:44 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Sep  1 00:24:47 2012] grppha failed
[Sat Sep  1 00:24:47 2012] Setting source spectrum file to fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  1 00:24:47 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Sep  1 00:40:40 2012] Updating aperture counts using extracted products
[Sat Sep  1 00:40:40 2012] Error reading totcts from fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src1_src.pi.gz
[Sat Sep  1 00:40:40 2012] No arf file for this source, not re-computing flux
[Sat Sep  1 00:40:43 2012] Source 1 has no response, skipping
[Sat Sep  1 00:40:44 2012] xmm0556140401/analysis//spectral/fullrun_pn_xmm0556140401_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete