[Sat Aug  4 21:47:41 2012] Detection parameters:
  Position = (311.3, 318.1) = 16 32 2.04 -47 52 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 41208.8 +/- 241.9
  Background counts = 34.7
  Rate = 7 +/- 0.04

[Sat Aug  4 21:47:41 2012] Off-axis axis estimate = 1.70'
[Sat Aug  4 21:49:20 2012] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 21:49:20 2012] Initial guess for spatial extent in simple fitting = 7.28"
[Sat Aug  4 21:49:20 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.847
[Sat Aug  4 21:49:20 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28"
[Sat Aug  4 22:44:04 2012] fullrun_pn_xmm0556140301_pi300-10000_cl_pass0_src1.ximg exists
[Sat Aug  4 22:44:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140301_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 22:44:04 2012] fullrun_pn_xmm0556140301_pi300-10000_cl_pass0_src1_1.ximg exists
[Sat Aug  4 22:44:04 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140301_pi300-10000_cl_pass0_src1.csv
[Sat Aug  4 22:44:04 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 22:44:04 2012] fullrun_pn_xmm0556140301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sat Aug  4 22:44:04 2012] fullrun_pn_xmm0556140301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sat Aug  4 22:44:04 2012] Fit fullrun_pn_xmm0556140301_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sat Aug  4 23:38:10 2012] Spatial fit model total counts = 31307.400000, observed total counts = 31243.000000
[Sat Aug  4 23:38:10 2012] Offset between fit and detection position for source 1 = 0.155303 pixels
[Sat Aug  4 23:38:10 2012] 31389.430000 total counts/ 6873.630000 bgd. counts: snr = 295.701137
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.155303 pixels
  Position = (311.1, 318.2) = 16 32 2.09 -47 52 29.5
  Extent = 6.4 (6.3-6.5)", rotation angle = 0
  Source counts = 24515.8 +/- 177.2
  Background counts = 6873.6
  Rate = 5 +/- 0.03
[Sat Aug  4 23:38:10 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 23:38:10 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 23:38:10 2012] Assessing source extent using major axis lower bound
[Sat Aug  4 23:38:10 2012] Source does appear to be extended
[Sat Aug  4 23:38:10 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 23:38:21 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Aug  4 23:38:21 2012] Initial guess for spatial extent in simple fitting = 6.41"
[Sat Aug  4 23:38:21 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.027
[Sat Aug  4 23:38:21 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.41"
[Sun Aug  5 00:33:52 2012] fullrun_pn_xmm0556140301_pi300-10000_cl_pass1_src1.ximg exists
[Sun Aug  5 00:33:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140301_pi300-10000_cl_pass1_src1.csv
[Sun Aug  5 00:33:52 2012] fullrun_pn_xmm0556140301_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Aug  5 00:33:52 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140301_pi300-10000_cl_pass1_src1.csv
[Sun Aug  5 00:33:52 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Aug  5 00:33:52 2012] fullrun_pn_xmm0556140301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Aug  5 00:33:52 2012] fullrun_pn_xmm0556140301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Aug  5 00:33:52 2012] Fit fullrun_pn_xmm0556140301_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Aug  5 01:42:54 2012] Spatial fit model total counts = 31341.400000, observed total counts = 31243.000000
[Sun Aug  5 01:42:54 2012] Offset between fit and detection position for source 1 = 0.000055 pixels
[Sun Aug  5 01:42:54 2012] 31423.700000 total counts/ 6882.000000 bgd. counts: snr = 295.833471
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000055 pixels
  Position = (311.1, 318.2) = 16 32 2.09 -47 52 29.5
  Extent = 6.4 (6.3-6.5)", rotation angle = 0
  Source counts = 24541.7 +/- 177.3
  Background counts = 6882.0
  Rate = 5 +/- 0.03
[Sun Aug  5 01:42:54 2012] Vigneting correction estimate = 1.000000
[Sun Aug  5 01:42:54 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Aug  5 01:42:54 2012] Assessing source extent using major axis lower bound
[Sun Aug  5 01:42:54 2012] Source does appear to be extended
[Sun Aug  5 01:42:54 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Aug  5 01:43:03 2012] Counts = 24541.700000, rescaling region sizes by 3.000000
[Sun Aug  5 01:43:03 2012] XMMSAS src. selection expression = ellipse(27019.802580, 27632.891000, 1153.800033, 1153.800033, 0.000000, X, Y)
[Sun Aug  5 01:43:03 2012] Writing source region out to fullrun_pn_xmm0556140301_pi300-10000_pass1_cl_src1_src.reg
[Sun Aug  5 01:43:03 2012] Extracting stamp from image fullrun_pn_xmm0556140301_pi300-10000_cl_sm2.00.img.gz, (245, 252) - (377, 384)
[Sun Aug  5 01:43:03 2012] XMMSAS bgd. selection expression = annulus(27019.802580, 27632.891000, 5769.000166, 11538.000332, X, Y) && !ellipse(23391.542969, 33607.524872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17591.169495, 36487.257263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23609.528839, 19995.852097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33227.245026, 38116.285004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33057.913600, 30204.018200, 502.108814, 502.108814, 0.000000, X, Y) && !ellipse(27821.406250, 29057.234772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29104.677490, 28046.186340, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27072.222200, 24921.480000, 697.020020, 697.020020, 0.000000, X, Y) && !ellipse(27117.392600, 24294.785340, 1162.272033, 406.851212, 90.000000, X, Y) && !ellipse(27155.331600, 23196.524600, 1042.632030, 1042.632030, 0.000000, X, Y) && !ellipse(27146.374000, 22663.270780, 755.727222, 755.727222, 0.000000, X, Y) && !ellipse(27241.571747, 21523.797562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23076.863586, 20510.268005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27315.908600, 20325.400000, 834.064024, 834.064024, 0.000000, X, Y) && !ellipse(27287.857006, 20120.473538, 1498.160043, 471.165616, 88.503119, X, Y) && !ellipse(27320.211600, 19024.155000, 1498.160043, 470.728014, 88.425520, X, Y) && !ellipse(27317.782740, 18965.473000, 1968.888057, 465.980013, 89.898412, X, Y) && !ellipse(27360.840973, 17350.917221, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27398.013540, 15713.131522, 1739.856050, 336.989002, 87.198239, X, Y) && !ellipse(27433.543400, 15390.248000, 817.544024, 817.544024, 0.000000, X, Y) && !ellipse(27445.020614, 15033.978484, 1809.168052, 415.976149, 88.866007, X, Y)
[Sun Aug  5 01:43:03 2012] Writing fullrun_pn_xmm0556140301_pi300-10000_pass1_cl_src1.gif
[Sun Aug  5 01:43:12 2012] Mean detx,y = (102.78, -192.74) 
[Sun Aug  5 01:43:16 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Aug  5 01:47:41 2012] Binned source spectrum to 10 counts/bin
[Sun Aug  5 01:47:41 2012] Setting source spectrum file to fullrun_pn_xmm0556140301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 01:47:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556140301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Aug  5 03:25:35 2012] Updating aperture counts using extracted products
[Sun Aug  5 03:25:35 2012] Error reading totcts from fullrun_pn_xmm0556140301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Aug  5 03:25:36 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 03:25:36 2012] Using photon index=1.80, rate=4.79, arf fullrun_pn_xmm0556140301_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 03:25:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 03:25:36 2012] Updating source flux to 1.1e-11
[Sun Aug  5 03:28:42 2012] Reading fit data from xmm0556140301/analysis//spectral/fullrun_pn_xmm0556140301_pi300-10000_pass1_cl_src1_pl.csv
[Sun Aug  5 03:28:42 2012] Spectral fit parameter nH value = 2.3771e+23
[Sun Aug  5 03:28:42 2012] Spectral fit parameter PhoIndex value = 0.831573
[Sun Aug  5 03:28:42 2012] Failed to get F(0.3-8.0) from xmm0556140301/analysis//spectral/fullrun_pn_xmm0556140301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sun Aug  5 03:28:42 2012] Calculating source flux in energy range 0.30-8.00
[Sun Aug  5 03:28:42 2012] Using Nh = 2.4e+23, photon index=0.83, rate=4.79, arf fullrun_pn_xmm0556140301_pi300-10000_pass1_cl_src1.arf
[Sun Aug  5 03:28:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Aug  5 03:28:43 2012] Updating source flux to 4.9e-11