[Sat Aug  4 21:47:59 2012] Detection parameters:
  Position = (380.5, 347.7) = 16 31 32.14 -47 50 21.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.1 +/- 10.9
  Background counts = 10.4
  Rate = 0.01 +/- 0.002

[Sat Aug  4 21:47:59 2012] Off-axis axis estimate = 6.94'
[Sat Aug  4 22:44:05 2012] Using EEF radius (= 9.90 ")to estimate initial spatial extent for simple fitting
[Sat Aug  4 22:44:05 2012] Initial guess for spatial extent in simple fitting = 9.90"
[Sat Aug  4 22:44:05 2012] source mask rpix=2.3, npix_max = 30, mask sum = 25, frac = 0.812
[Sat Aug  4 22:44:05 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.90"
[Sat Aug  4 23:00:28 2012] fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_src4.ximg exists
[Sat Aug  4 23:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_src4.csv
[Sat Aug  4 23:00:28 2012] fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Aug  4 23:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_src4.csv
[Sat Aug  4 23:00:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 23:00:28 2012] fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Aug  4 23:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Aug  4 23:00:28 2012] fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Aug  4 23:00:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_tfrozen_src4.csv
[Sat Aug  4 23:00:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556140301_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug  4 23:38:12 2012] Spatial fit model total counts = 152.131000, observed total counts = 132.000000
[Sat Aug  4 23:38:12 2012] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Aug  4 23:38:12 2012] Vigneting correction estimate = 1.000000
[Sat Aug  4 23:38:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug  4 23:38:12 2012] Assessing source extent using major
[Sat Aug  4 23:38:12 2012] Source does appear to be extended
[Sat Aug  4 23:38:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug  4 23:38:12 2012] Deleting source due to low Poisson probability 0.9