[Fri Jun  1 13:23:26 2012] Detection parameters:
  Position = (314.0, 161.9) = 16 32 0.91 -48 3 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125.0 +/- 16.5
  Background counts = 32.7
  Rate = 0.02 +/- 0.002

[Fri Jun  1 13:23:26 2012] Off-axis axis estimate = 9.96'
[Fri Jun  1 13:25:28 2012] Using EEF radius (= 11.41 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 13:25:28 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 13:25:28 2012] Initial guess for spatial extent in simple fitting = 11.41"
[Fri Jun  1 13:25:28 2012] source mask rpix=2.6, npix_max = 39, mask sum = 36, frac = 0.923
[Fri Jun  1 13:25:28 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 11.41"
[Fri Jun  1 14:22:18 2012] fullrun_pn_xmm0556140201_pi300-10000_cl_pass0_src3.ximg exists
[Fri Jun  1 14:22:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140201_pi300-10000_cl_pass0_src3.csv
[Fri Jun  1 14:22:18 2012] fullrun_pn_xmm0556140201_pi300-10000_cl_pass0_src3_1.ximg exists
[Fri Jun  1 14:22:18 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556140201_pi300-10000_cl_pass0_src3.csv
[Fri Jun  1 14:22:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 14:22:18 2012] fullrun_pn_xmm0556140201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Fri Jun  1 14:22:18 2012] fullrun_pn_xmm0556140201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Fri Jun  1 14:22:18 2012] Fit fullrun_pn_xmm0556140201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Fri Jun  1 14:52:02 2012] Spatial fit model total counts = 307.936000, observed total counts = 308.000000
[Fri Jun  1 14:52:02 2012] Offset between fit and detection position for source 4 = 0.846231 pixels
[Fri Jun  1 14:52:02 2012] 219.224700 total counts/ 135.817000 bgd. counts: snr = 7.156968
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.846231 pixels
  Position = (314.0, 162.8) = 16 32 0.91 -48 3 46.1
  Extent = 9.3 (6.6-13.4)", rotation angle = 0
  Source counts = 83.4 +/- 14.8
  Background counts = 135.8
  Rate = 0.03 +/- 0.005
[Fri Jun  1 14:52:02 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 14:52:02 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 14:52:02 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 14:52:02 2012] Source does appear to be extended
[Fri Jun  1 14:52:02 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 14:52:15 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 14:52:15 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Fri Jun  1 14:52:15 2012] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.087
[Fri Jun  1 14:52:15 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 9.25"
[Fri Jun  1 15:44:18 2012] fullrun_pn_xmm0556140201_pi300-10000_cl_pass1_src3.ximg exists
[Fri Jun  1 15:44:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140201_pi300-10000_cl_pass1_src3.csv
[Fri Jun  1 15:44:18 2012] fullrun_pn_xmm0556140201_pi300-10000_cl_pass1_src3_1.ximg exists
[Fri Jun  1 15:44:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140201_pi300-10000_cl_pass1_src3.csv
[Fri Jun  1 15:44:18 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 15:44:18 2012] fullrun_pn_xmm0556140201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Fri Jun  1 15:44:18 2012] fullrun_pn_xmm0556140201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Fri Jun  1 15:44:18 2012] Fit fullrun_pn_xmm0556140201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Fri Jun  1 16:03:34 2012] Spatial fit model total counts = 301.434000, observed total counts = 302.000000
[Fri Jun  1 16:03:34 2012] Offset between fit and detection position for source 4 = 0.707134 pixels
[Fri Jun  1 16:03:34 2012] 225.976900 total counts/ 149.637000 bgd. counts: snr = 6.240683
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.707134 pixels
  Position = (314.0, 163.5) = 16 32 0.92 -48 3 43.1
  Extent = 8.9 (6.5-12.8)", rotation angle = 0
  Source counts = 76.3 +/- 15.0
  Background counts = 149.6
  Rate = 0.03 +/- 0.005
[Fri Jun  1 16:03:34 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 16:03:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 16:03:34 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 16:03:34 2012] Source does appear to be extended
[Fri Jun  1 16:03:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 16:03:34 2012] Source is confused with source 25
[Fri Jun  1 16:03:42 2012] XMMSAS src. selection expression = ellipse(27269.188670, 14173.824800, 536.988015, 536.988015, 0.000000, X, Y)
[Fri Jun  1 16:03:42 2012] Writing source region out to fullrun_pn_xmm0556140201_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun  1 16:03:42 2012] Extracting stamp from image fullrun_pn_xmm0556140201_pi300-10000_cl_sm2.00.img.gz, (283, 133) - (345, 194)
[Fri Jun  1 16:03:42 2012] XMMSAS bgd. selection expression = annulus(27269.188670, 14173.824800, 894.980026, 1789.960052, X, Y) && !ellipse(27292.368600, 16319.218000, 713.703221, 713.703221, 0.000000, X, Y) && !ellipse(27277.802277, 14818.799850, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27297.985809, 13361.383911, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 16:03:42 2012] Writing fullrun_pn_xmm0556140201_pi300-10000_pass1_cl_src4.gif
[Fri Jun  1 16:09:26 2012] Mean detx,y = (105.11, 13252.71) 
[Fri Jun  1 16:09:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 16:09:41 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 16:09:41 2012] Setting source spectrum file to fullrun_pn_xmm0556140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  1 16:09:41 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556140201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun  1 17:03:10 2012] Not generating rmf since there are only 76 counts
[Fri Jun  1 17:03:10 2012] rmf not generated due to insufficient counts
[Fri Jun  1 17:36:47 2012] Updating aperture counts using extracted products
[Fri Jun  1 17:36:47 2012] Error reading totcts from fullrun_pn_xmm0556140201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun  1 17:36:48 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun  1 17:36:48 2012] Using photon index=1.80, rate=0.0264, arf fullrun_pn_xmm0556140201_pi300-10000_pass1_cl_src4.arf
[Fri Jun  1 17:36:48 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun  1 17:36:48 2012] Updating source flux to 1.5e-13
[Fri Jun  1 17:37:22 2012] Flag c found in src. 4 procflags, skipping spectral fitting
[Fri Jun  1 17:37:22 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting