[Sun Sep  2 15:35:30 2012] Detection parameters:
  Position = (311.9, 317.9) = 16 32 2.04 -47 52 28.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31364.3 +/- 212.4
  Background counts = 40.9
  Rate = 4 +/- 0.03

[Sun Sep  2 15:35:30 2012] Off-axis axis estimate = 1.72'
[Sun Sep  2 15:37:08 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 15:37:08 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Sep  2 15:37:08 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846
[Sun Sep  2 15:37:08 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Sep  2 16:27:16 2012] fullrun_pn_xmm0556140101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Sep  2 16:27:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140101_pi300-10000_cl_pass0_src1.csv
[Sun Sep  2 16:27:16 2012] fullrun_pn_xmm0556140101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Sep  2 16:27:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140101_pi300-10000_cl_pass0_src1.csv
[Sun Sep  2 16:27:16 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 16:27:16 2012] fullrun_pn_xmm0556140101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep  2 16:27:16 2012] fullrun_pn_xmm0556140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep  2 16:27:16 2012] Fit fullrun_pn_xmm0556140101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Sep  2 17:23:20 2012] Spatial fit model total counts = 21816.300000, observed total counts = 21603.000000
[Sun Sep  2 17:23:20 2012] Offset between fit and detection position for source 1 = 0.180152 pixels
[Sun Sep  2 17:23:20 2012] 21877.030000 total counts/ 5293.130000 bgd. counts: snr = 227.945168
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.180152 pixels
  Position = (311.8, 317.8) = 16 32 2.11 -47 52 29.1
  Extent = 6.1 (6.0-6.1)", rotation angle = 0
  Source counts = 16583.9 +/- 147.9
  Background counts = 5293.1
  Rate = 2 +/- 0.02
[Sun Sep  2 17:23:20 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 17:23:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 17:23:20 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 17:23:20 2012] Source does appear to be extended
[Sun Sep  2 17:23:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 17:23:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep  2 17:23:30 2012] Initial guess for spatial extent in simple fitting = 6.06"
[Sun Sep  2 17:23:30 2012] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.116
[Sun Sep  2 17:23:30 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.06"
[Sun Sep  2 18:04:44 2012] fullrun_pn_xmm0556140101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Sep  2 18:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140101_pi300-10000_cl_pass1_src1.csv
[Sun Sep  2 18:04:44 2012] fullrun_pn_xmm0556140101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Sep  2 18:04:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556140101_pi300-10000_cl_pass1_src1.csv
[Sun Sep  2 18:04:44 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556140101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556140101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 18:04:45 2012] fullrun_pn_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep  2 18:04:45 2012] fullrun_pn_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep  2 18:04:45 2012] Fit fullrun_pn_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep  2 18:41:41 2012] Spatial fit model total counts = 21796.300000, observed total counts = 21603.000000
[Sun Sep  2 18:41:41 2012] Offset between fit and detection position for source 1 = 0.000113 pixels
[Sun Sep  2 18:41:41 2012] 21856.780000 total counts/ 5282.380000 bgd. counts: snr = 228.046282
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000113 pixels
  Position = (311.8, 317.8) = 16 32 2.11 -47 52 29.1
  Extent = 6.1 (6.0-6.1)", rotation angle = 0
  Source counts = 16574.4 +/- 147.8
  Background counts = 5282.4
  Rate = 2 +/- 0.02
[Sun Sep  2 18:41:41 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 18:41:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 18:41:41 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 18:41:41 2012] Source does appear to be extended
[Sun Sep  2 18:41:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 18:41:49 2012] Counts = 16574.400000, rescaling region sizes by 3.000000
[Sun Sep  2 18:41:49 2012] XMMSAS src. selection expression = ellipse(27074.936200, 27599.406000, 1092.160831, 1092.160831, 0.000000, X, Y)
[Sun Sep  2 18:41:49 2012] Writing source region out to fullrun_pn_xmm0556140101_pi300-10000_pass1_cl_src1_src.reg
[Sun Sep  2 18:41:49 2012] Extracting stamp from image fullrun_pn_xmm0556140101_pi300-10000_cl_sm2.00.img.gz, (249, 255) - (375, 381)
[Sun Sep  2 18:41:49 2012] XMMSAS bgd. selection expression = annulus(27074.936200, 27599.406000, 5460.804157, 10921.608314, X, Y) && !ellipse(23450.035919, 33557.331543, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23718.037231, 19975.977875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17643.438620, 36444.473700, 501.098414, 501.098414, 0.000000, X, Y) && !ellipse(27095.352600, 16927.080660, 630.596818, 630.596818, 0.000000, X, Y) && !ellipse(25743.567047, 31725.998535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27381.951111, 28907.637146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28120.936000, 26034.262000, 1166.008034, 898.008026, 124.485000, X, Y) && !ellipse(27087.440727, 24411.688819, 1171.368034, 376.144523, 87.485547, X, Y) && !ellipse(27098.345000, 23927.592600, 585.682417, 585.682417, 0.000000, X, Y) && !ellipse(27122.244600, 23462.322800, 1261.000036, 353.699210, 89.459055, X, Y) && !ellipse(27123.956800, 22658.613200, 1261.000036, 415.668012, 90.114690, X, Y) && !ellipse(27059.534000, 21878.182400, 652.580819, 652.580819, 0.000000, X, Y) && !ellipse(27135.155518, 20481.568466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27019.387600, 18993.930000, 909.496026, 909.496026, 0.000000, X, Y) && !ellipse(27070.155090, 18755.660034, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27059.159200, 18296.936400, 685.191220, 685.191220, 0.000000, X, Y)
[Sun Sep  2 18:41:49 2012] Writing fullrun_pn_xmm0556140101_pi300-10000_pass1_cl_src1.gif
[Sun Sep  2 18:41:58 2012] Mean detx,y = (105.56, -198.64) 
[Sun Sep  2 18:42:01 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 18:44:42 2012] grppha failed
[Sun Sep  2 18:44:42 2012] Setting source spectrum file to fullrun_pn_xmm0556140101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sun Sep  2 18:44:42 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556140101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Sep  2 19:03:32 2012] Updating aperture counts using extracted products
[Sun Sep  2 19:03:32 2012] Error reading totcts from fullrun_pn_xmm0556140101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sun Sep  2 19:03:32 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 19:03:35 2012] Source 1 has no response, skipping
[Sun Sep  2 19:03:36 2012] xmm0556140101/analysis//spectral/fullrun_pn_xmm0556140101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete