[Sun Sep  2 15:36:08 2012] Detection parameters:
  Position = (309.3, 318.0) = 16 32 3.17 -47 52 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 602.3 +/- 65.0
  Background counts = 12.8
  Rate = 0.07 +/- 0.008

[Sun Sep  2 15:36:08 2012] Off-axis axis estimate = 1.62'
[Sun Sep  2 16:41:30 2012] Using EEF radius (= 7.24 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 16:41:30 2012] Initial guess for spatial extent in simple fitting = 7.24"
[Sun Sep  2 16:41:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 8, frac = 0.427
[Sun Sep  2 16:41:30 2012] Skipping simple spatial due to low active detector fraction
[Sun Sep  2 17:23:24 2012] Source 3 is offset by -3.728845 and 5.593247 pixels which is larger than
2 X fitted extent = 3.540648 x 3.540648, not incorporating fit results
[Sun Sep  2 17:23:24 2012] Spatial fit model total counts = 721.137000, observed total counts = 720.000000
[Sun Sep  2 17:23:24 2012] Offset between fit and detection position for source 3 = 3.833166 pixels
[Sun Sep  2 17:23:24 2012] Warning, changing simple spatial fit ID from -1 to 7
[Sun Sep  2 17:23:24 2012] 701.274000 total counts/ 530.437000 bgd. counts: snr = 7.417628
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 3.833166 pixels
  Position = (305.6, 316.9) = 16 32 4.77 -47 52 32.8
  Extent = 12.9 (9.9-14.4)", rotation angle = 0
  Source counts = 170.8 +/- 26.5
  Background counts = 530.4
  Rate = 0.02 +/- 0.002
[Sun Sep  2 17:23:24 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 17:23:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 17:23:24 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 17:23:24 2012] Source does appear to be extended
[Sun Sep  2 17:23:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 17:23:24 2012] Source is confused with source 1
[Sun Sep  2 18:07:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep  2 18:07:17 2012] Initial guess for spatial extent in simple fitting = 12.92"
[Sun Sep  2 18:07:17 2012] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.872
[Sun Sep  2 18:07:17 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 12.92"
[Sun Sep  2 18:41:35 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src3.ximg exists
[Sun Sep  2 18:41:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src3.csv
[Sun Sep  2 18:41:35 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Sep  2 18:41:35 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src3.csv
[Sun Sep  2 18:41:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 18:41:35 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Sep  2 18:41:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Sep  2 18:41:35 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Sep  2 18:41:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src3.csv
[Sun Sep  2 18:41:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 18:41:43 2012] Warning, spatial fit 3 centroid is now closest to src. 12
[Sun Sep  2 18:41:43 2012] Source 3 is offset by 1.214023 and 4.324299 pixels which is larger than
2 X fitted extent = 0.828023 x 0.841816, not incorporating fit results
[Sun Sep  2 18:41:43 2012] Spatial fit model total counts = 718.811000, observed total counts = 720.000000
[Sun Sep  2 18:41:43 2012] Offset between fit and detection position for source 3 = 1.095348 pixels
[Sun Sep  2 18:41:43 2012] Warning, changing simple spatial fit ID from 3 to 8
[Sun Sep  2 18:41:43 2012] 620.289000 total counts/ 472.829000 bgd. counts: snr = 6.781444
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.095348 pixels
  Position = (305.6, 315.9) = 16 32 4.77 -47 52 37.5
  Extent = 14.4 (14.4-28.8)", rotation angle = 0
  Source counts = 147.5 +/- 24.9
  Background counts = 472.8
  Rate = 0.01 +/- 0.002
[Sun Sep  2 18:41:43 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 18:41:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 18:41:43 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 18:41:43 2012] Source does appear to be extended
[Sun Sep  2 18:41:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 18:56:21 2012] XMMSAS src. selection expression = ellipse(26539.802000, 27430.726000, 864.456025, 864.456025, 0.000000, X, Y)
[Sun Sep  2 18:56:21 2012] Writing source region out to fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src3_src.reg
[Sun Sep  2 18:56:21 2012] Extracting stamp from image fullrun_mos2_xmm0556140101_pi300-10000_cl_sm2.00.img.gz, (256, 266) - (355, 366)
[Sun Sep  2 18:56:21 2012] XMMSAS bgd. selection expression = annulus(26539.802000, 27430.726000, 1440.760041, 2881.520083, X, Y) && !ellipse(27365.140000, 27680.723400, 1200.736035, 1200.736035, 0.000000, X, Y) && !ellipse(27999.656952, 27440.343170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27016.842102, 26504.339142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25975.149323, 27775.054749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27940.375458, 26829.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26001.824402, 26927.301239, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep  2 18:56:21 2012] Writing fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src3.gif
[Sun Sep  2 19:01:24 2012] Mean detx,y = (117.63, 35.90) 
[Sun Sep  2 19:01:25 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 19:01:31 2012] grppha failed
[Sun Sep  2 19:01:31 2012] Setting source spectrum file to fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src3_src.pi.gz
[Sun Sep  2 19:01:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun Sep  2 19:03:32 2012] Updating aperture counts using extracted products
[Sun Sep  2 19:03:32 2012] Error reading totcts from fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src3_src.pi.gz
[Sun Sep  2 19:03:32 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 19:03:34 2012] Flag b found in src. 3 procflags, skipping spectral fitting
[Sun Sep  2 19:03:34 2012] Flag c found in src. 3 procflags, skipping spectral fitting
[Sun Sep  2 19:03:34 2012] Source 3 has no response, skipping
[Sun Sep  2 19:03:35 2012] xmm0556140101/analysis//spectral/fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete