[Sun Sep  2 15:36:08 2012] Detection parameters:
  Position = (312.0, 317.9) = 16 32 2.00 -47 52 28.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 8750.4 +/- 110.5
  Background counts = 12.8
  Rate = 0.9 +/- 0.01

[Sun Sep  2 15:36:08 2012] Off-axis axis estimate = 1.72'
[Sun Sep  2 16:41:30 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 16:41:30 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun Sep  2 16:41:30 2012] source mask rpix=1.7, npix_max = 18, mask sum = 12, frac = 0.634
[Sun Sep  2 16:41:30 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.29"
[Sun Sep  2 17:23:14 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Sep  2 17:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_src1.csv
[Sun Sep  2 17:23:14 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Sep  2 17:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_src1.csv
[Sun Sep  2 17:23:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:23:14 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Sep  2 17:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Sep  2 17:23:14 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Sep  2 17:23:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_tfrozen_src1.csv
[Sun Sep  2 17:23:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 17:23:24 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.289225 pixels away
[Sun Sep  2 17:23:24 2012] Spatial fit model total counts = 1638.260000, observed total counts = 1820.000000
[Sun Sep  2 17:23:24 2012] Offset between fit and detection position for source 1 = 3.201485 pixels
[Sun Sep  2 17:23:24 2012] Warning, changing simple spatial fit ID from 1 to 5
[Sun Sep  2 17:23:24 2012] 1025.009105 total counts/ 0.059105 bgd. counts: snr = 4215.895468
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 3.201485 pixels
  Position = (315.1, 318.7) = 16 32 0.67 -47 52 25.0
  Extent = 15.0 (15.0-30.0)", rotation angle = 0
  Source counts = 1025.0 +/- 32.0
  Background counts = 0.1
  Rate = 0.1 +/- 0.003
[Sun Sep  2 17:23:24 2012] Spatial fit model total counts = 1562.550000, observed total counts = 1862.000000
[Sun Sep  2 17:23:24 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Sep  2 17:23:24 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 17:23:24 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 17:23:24 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 17:23:24 2012] Source does appear to be extended
[Sun Sep  2 17:23:24 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 17:23:24 2012] Source is confused with source 3
[Sun Sep  2 17:23:24 2012] Source is confused with source 9
[Sun Sep  2 18:07:17 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Sep  2 18:07:17 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep  2 18:07:17 2012] Initial guess for spatial extent in simple fitting = 15.01"
[Sun Sep  2 18:07:17 2012] source mask rpix=3.5, npix_max = 62, mask sum = 48, frac = 0.769
[Sun Sep  2 18:07:17 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 15.01"
[Sun Sep  2 18:41:35 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Sep  2 18:41:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src1.csv
[Sun Sep  2 18:41:35 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Sep  2 18:41:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src1.csv
[Sun Sep  2 18:41:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 18:41:35 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Sep  2 18:41:35 2012] fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Sep  2 18:41:35 2012] Fit fullrun_mos2_xmm0556140101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun Sep  2 18:41:43 2012] Source 1 is offset by 3.061586 and 0.931830 pixels which is larger than
2 X fitted extent = 3.031200 x 3.031200, not incorporating fit results
[Sun Sep  2 18:41:43 2012] Spatial fit model total counts = 2090.050000, observed total counts = 1820.000000
[Sun Sep  2 18:41:43 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun Sep  2 18:41:43 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 18:41:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 18:41:43 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 18:41:43 2012] Source does appear to be extended
[Sun Sep  2 18:41:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 18:56:21 2012] Counts = 1024.950000, rescaling region sizes by 2.000000
[Sun Sep  2 18:56:21 2012] XMMSAS src. selection expression = ellipse(27365.140000, 27680.723400, 1801.104052, 1801.104052, 0.000000, X, Y)
[Sun Sep  2 18:56:21 2012] Writing source region out to fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src1_src.reg
[Sun Sep  2 18:56:21 2012] Extracting stamp from image fullrun_mos2_xmm0556140101_pi300-10000_cl_sm2.00.img.gz, (212, 215) - (419, 422)
[Sun Sep  2 18:56:21 2012] XMMSAS bgd. selection expression = annulus(27365.140000, 27680.723400, 6003.680173, 12007.360346, X, Y) && !ellipse(23433.115417, 33555.382751, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26539.802000, 27430.726000, 1152.608033, 1152.608033, 0.000000, X, Y) && !ellipse(17651.632477, 36484.583649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23773.205400, 19955.506600, 483.221614, 483.221614, 0.000000, X, Y) && !ellipse(27999.656952, 27440.343170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27016.842102, 26504.339142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25975.149323, 27775.054749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27940.375458, 26829.309418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26001.824402, 26927.301239, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Sep  2 18:56:21 2012] Writing fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src1.gif
[Sun Sep  2 18:56:24 2012] Mean detx,y = (12.51, 59.44) 
[Sun Sep  2 18:56:26 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 19:01:01 2012] grppha failed
[Sun Sep  2 19:01:01 2012] Setting source spectrum file to fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sun Sep  2 19:01:01 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Sep  2 19:03:32 2012] Updating aperture counts using extracted products
[Sun Sep  2 19:03:32 2012] Error reading totcts from fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src1_src.pi.gz
[Sun Sep  2 19:03:32 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 19:03:34 2012] Flag b found in src. 1 procflags, skipping spectral fitting
[Sun Sep  2 19:03:34 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Sun Sep  2 19:03:34 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Sep  2 19:03:34 2012] Source 1 has no response, skipping
[Sun Sep  2 19:03:35 2012] xmm0556140101/analysis//spectral/fullrun_mos2_xmm0556140101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete