[Thu May 30 00:40:31 2013] Detection parameters:
  Position = (421.3, 221.5) = 11 14 48.39 18 2 34.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.6 +/- 12.9
  Background counts = 41.3
  Rate = 0.002 +/- 0.0003

[Thu May 30 00:40:33 2013] Off-axis axis estimate = 10.51'
[Thu May 30 00:41:14 2013] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Thu May 30 00:41:14 2013] Initial guess for spatial extent in simple fitting = 11.68"
[Thu May 30 00:41:14 2013] source mask rpix=2.7, npix_max = 40, mask sum = 27, frac = 0.665
[Thu May 30 00:41:14 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 11.68"
[Thu May 30 00:41:16 2013] fullrun_pn_xmm0556090101_pi300-10000_cl_pass0_src51.ximg exists
[Thu May 30 00:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556090101_pi300-10000_cl_pass0_src51.csv
[Thu May 30 00:41:16 2013] fullrun_pn_xmm0556090101_pi300-10000_cl_pass0_src51_1.ximg exists
[Thu May 30 00:41:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556090101_pi300-10000_cl_pass0_src51.csv
[Thu May 30 00:41:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556090101_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556090101_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:41:18 2013] fullrun_pn_xmm0556090101_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Thu May 30 00:41:18 2013] fullrun_pn_xmm0556090101_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Thu May 30 00:41:18 2013] Fit fullrun_pn_xmm0556090101_pi300-10000_cl_pass0_tfrozen_src51 appears to have run properly
[Thu May 30 00:41:37 2013] Warning: source 51 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 14.624478 pixels away
[Thu May 30 00:41:37 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:41:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:41:37 2013] Assessing source extent using major
[Thu May 30 00:41:37 2013] Source does appear to be extended
[Thu May 30 00:41:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 00:42:14 2013] Using EEF radius (= 11.68 ")to estimate initial spatial extent for simple fitting
[Thu May 30 00:42:14 2013] Initial guess for spatial extent in simple fitting = 11.68"
[Thu May 30 00:42:14 2013] source mask rpix=2.7, npix_max = 40, mask sum = 27, frac = 0.665
[Thu May 30 00:42:14 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 11.68"
[Thu May 30 00:42:15 2013] fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_src48.ximg exists
[Thu May 30 00:42:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_src48.csv
[Thu May 30 00:42:15 2013] fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_src48_1.ximg exists
[Thu May 30 00:42:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_src48.csv
[Thu May 30 00:42:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:42:16 2013] fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Thu May 30 00:42:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Thu May 30 00:42:16 2013] fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Thu May 30 00:42:16 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_tfrozen_src48.csv
[Thu May 30 00:42:16 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556090101_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:42:39 2013] Warning: source 48 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 52 at 14.560276 pixels away
[Thu May 30 00:42:39 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:42:39 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:42:39 2013] Assessing source extent using major
[Thu May 30 00:42:39 2013] Source does appear to be extended
[Thu May 30 00:42:39 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 00:43:12 2013] XMMSAS src. selection expression = ellipse(36606.401703, 19223.270432, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 00:43:12 2013] Not overwriting source region fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_src.reg
[Thu May 30 00:43:12 2013] Extracting stamp from image fullrun_pn_xmm0556090101_pi300-10000_cl_sm2.00.img.gz, (384, 184) - (459, 259)
[Thu May 30 00:43:12 2013] XMMSAS bgd. selection expression = annulus(36606.401703, 19223.270432, 1087.500000, 2175.000000, X, Y) && !ellipse(38591.333466, 19467.681808, 870.000000, 870.000000, 0.000000, X, Y)
[Thu May 30 00:43:12 2013] Writing fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52.gif
[Thu May 30 00:43:24 2013] ../../xmm0556090101/products/events/fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_src.evt and ../../xmm0556090101/products/events/fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_bgd.evt exist, delete to re-create
[Thu May 30 00:43:24 2013] Mean detx,y = (-8245.20, -9052.67) 
[Thu May 30 00:43:24 2013] ../../xmm0556090101/products/images/fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_src.img and ../../xmm0556090101/products/images/fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_bgd.img exist, delete to re-create
[Thu May 30 00:43:24 2013] ../../xmm0556090101/products/spectra/fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_src.pi and ../../xmm0556090101/products/spectra/fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_bgd.pi exist, delete to re-create
[Thu May 30 00:43:24 2013] Setting source spectrum file to fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_src.pi.gz
[Thu May 30 00:43:24 2013] Setting bgd. spectrum file to fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_bgd.pi.gz
[Thu May 30 00:43:24 2013] ../../xmm0556090101/products/lightcurves/fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_src.lc and ../../xmm0556090101/products/lightcurves/fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_bgd.lc exist, delete to re-create
[Thu May 30 00:43:56 2013] Not generating rmf since there are only 73 counts
[Thu May 30 00:43:56 2013] rmf not generated due to insufficient counts
[Thu May 30 00:46:10 2013] Updating aperture counts using extracted products
[Thu May 30 00:46:10 2013] Total counts from fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_src.pi.gz = 230.00
[Thu May 30 00:46:11 2013] Total counts from fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_bgd.pi.gz = 1885.00
[Thu May 30 00:46:11 2013] Got source and background scale factors 847626.000000, 8314705.000000
[Thu May 30 00:46:11 2013] User source parameters:
  Position = (421.3, 221.5) = 11 14 48.39 18 2 34.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 37.8 +/- 16.2
  Background aperture counts = 192.2
  Rate = 0.0009 +/- 0.0004

[Thu May 30 00:46:11 2013] Updating counts from extracted products
[Thu May 30 00:46:11 2013] Set source signif. to 37.84/13.86 = 2.73
[Thu May 30 00:46:14 2013] No arf file for this source, not re-computing flux
[Thu May 30 00:46:33 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 00:46:34 2013] xmm0556090101/analysis//spectral/fullrun_pn_xmm0556090101_pi300-10000_pass1_cl_src52_pl.csv not found, spectral fit skipped or did not complete