[Thu May 30 00:40:34 2013] Detection parameters:
  Position = (409.3, 391.3) = 11 14 52.00 18 15 2.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 85.9 +/- 12.5
  Background counts = 14.6
  Rate = 0.002 +/- 0.0003

[Thu May 30 00:40:35 2013] Off-axis axis estimate = 10.49'
[Thu May 30 00:41:18 2013] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Thu May 30 00:41:18 2013] Initial guess for spatial extent in simple fitting = 11.67"
[Thu May 30 00:41:18 2013] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.209
[Thu May 30 00:41:18 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 11.67"
[Thu May 30 00:41:18 2013] fullrun_mos1_xmm0556090101_pi300-10000_cl_pass0_src10.ximg exists
[Thu May 30 00:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556090101_pi300-10000_cl_pass0_src10.csv
[Thu May 30 00:41:18 2013] fullrun_mos1_xmm0556090101_pi300-10000_cl_pass0_src10_1.ximg exists
[Thu May 30 00:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556090101_pi300-10000_cl_pass0_src10.csv
[Thu May 30 00:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556090101_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556090101_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:41:19 2013] fullrun_mos1_xmm0556090101_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Thu May 30 00:41:19 2013] fullrun_mos1_xmm0556090101_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Thu May 30 00:41:19 2013] Fit fullrun_mos1_xmm0556090101_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Thu May 30 00:41:44 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.412472 pixels away
[Thu May 30 00:41:44 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:41:44 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:41:44 2013] Assessing source extent using major
[Thu May 30 00:41:44 2013] Source does appear to be extended
[Thu May 30 00:41:44 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 00:42:16 2013] Using EEF radius (= 11.67 ")to estimate initial spatial extent for simple fitting
[Thu May 30 00:42:16 2013] Initial guess for spatial extent in simple fitting = 11.67"
[Thu May 30 00:42:16 2013] source mask rpix=2.7, npix_max = 40, mask sum = 49, frac = 1.209
[Thu May 30 00:42:16 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 11.67"
[Thu May 30 00:42:17 2013] fullrun_mos1_xmm0556090101_pi300-10000_cl_pass1_src10.ximg exists
[Thu May 30 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556090101_pi300-10000_cl_pass1_src10.csv
[Thu May 30 00:42:17 2013] fullrun_mos1_xmm0556090101_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu May 30 00:42:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556090101_pi300-10000_cl_pass1_src10.csv
[Thu May 30 00:42:17 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556090101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556090101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 30 00:42:17 2013] fullrun_mos1_xmm0556090101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu May 30 00:42:17 2013] fullrun_mos1_xmm0556090101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu May 30 00:42:17 2013] Fit fullrun_mos1_xmm0556090101_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu May 30 00:42:45 2013] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 15.412472 pixels away
[Thu May 30 00:42:45 2013] Vigneting correction estimate = 1.000000
[Thu May 30 00:42:45 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 30 00:42:45 2013] Assessing source extent using major
[Thu May 30 00:42:45 2013] Source does appear to be extended
[Thu May 30 00:42:45 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 30 00:43:58 2013] XMMSAS src. selection expression = ellipse(35564.918671, 33998.541656, 652.500000, 652.500000, 0.000000, X, Y)
[Thu May 30 00:43:58 2013] Not overwriting source region fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_src.reg
[Thu May 30 00:43:58 2013] Extracting stamp from image fullrun_mos1_xmm0556090101_pi300-10000_cl_sm2.00.img.gz, (372, 354) - (447, 429)
[Thu May 30 00:43:58 2013] XMMSAS bgd. selection expression = annulus(35564.918671, 33998.541656, 1087.500000, 2175.000000, X, Y)
[Thu May 30 00:43:58 2013] Writing fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5.gif
[Thu May 30 00:43:59 2013] ../../xmm0556090101/products/events/fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0556090101/products/events/fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Thu May 30 00:43:59 2013] Mean detx,y = (-4851.41, -13454.95) 
[Thu May 30 00:43:59 2013] ../../xmm0556090101/products/images/fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_src.img and ../../xmm0556090101/products/images/fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Thu May 30 00:43:59 2013] ../../xmm0556090101/products/spectra/fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_src.pi and ../../xmm0556090101/products/spectra/fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Thu May 30 00:43:59 2013] Setting source spectrum file to fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_src.pi.gz
[Thu May 30 00:43:59 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu May 30 00:43:59 2013] ../../xmm0556090101/products/lightcurves/fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0556090101/products/lightcurves/fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Thu May 30 00:44:25 2013] Not generating rmf since there are only 85 counts
[Thu May 30 00:44:25 2013] rmf not generated due to insufficient counts
[Thu May 30 00:46:17 2013] Updating aperture counts using extracted products
[Thu May 30 00:46:17 2013] Total counts from fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_src.pi.gz = 175.00
[Thu May 30 00:46:17 2013] Total counts from fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_bgd.pi.gz = 854.00
[Thu May 30 00:46:17 2013] Got source and background scale factors 1344000.000000, 10847564.000000
[Thu May 30 00:46:17 2013] User source parameters:
  Position = (409.3, 391.3) = 11 14 52.00 18 15 2.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 69.2 +/- 14.3
  Background aperture counts = 105.8
  Rate = 0.002 +/- 0.0003

[Thu May 30 00:46:17 2013] Updating counts from extracted products
[Thu May 30 00:46:17 2013] Set source signif. to 69.19/10.29 = 6.73
[Thu May 30 00:46:20 2013] No arf file for this source, not re-computing flux
[Thu May 30 00:46:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu May 30 00:46:32 2013] xmm0556090101/analysis//spectral/fullrun_mos1_xmm0556090101_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete