[Sun Dec 18 20:11:25 2011] Detection parameters:
  Position = (270.3, 280.9) = 20 53 53.43 44 23 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 150044.4 +/- 459.5
  Background counts = 190.7
  Rate = 6 +/- 0.02

[Sun Dec 18 20:11:26 2011] Off-axis axis estimate = 2.41'
[Sun Dec 18 20:14:50 2011] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 20:14:50 2011] Initial guess for spatial extent in simple fitting = 7.63"
[Sun Dec 18 20:14:50 2011] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.984
[Sun Dec 18 20:14:50 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.63"
[Sun Dec 18 20:54:16 2011] fullrun_pn_xmm0556050101_pi300-10000_cl_pass0_src1.ximg exists
[Sun Dec 18 20:54:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556050101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 20:54:16 2011] fullrun_pn_xmm0556050101_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Dec 18 20:54:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556050101_pi300-10000_cl_pass0_src1.csv
[Sun Dec 18 20:54:16 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556050101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556050101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 20:54:17 2011] fullrun_pn_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Dec 18 20:54:17 2011] fullrun_pn_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Dec 18 20:54:17 2011] Fit fullrun_pn_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Dec 18 23:06:13 2011] Spatial fit model total counts = 77462.400000, observed total counts = 77452.000000
[Sun Dec 18 23:06:13 2011] Offset between fit and detection position for source 1 = 0.093107 pixels
[Sun Dec 18 23:06:13 2011] 77822.600000 total counts/ 15842.800000 bgd. counts: snr = 492.418318
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.093107 pixels
  Position = (270.3, 280.8) = 20 53 53.42 44 23 11.7
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 61979.8 +/- 279.0
  Background counts = 15842.8
  Rate = 6 +/- 0.03
[Sun Dec 18 23:06:13 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 23:06:13 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 23:06:13 2011] Assessing source extent using major axis lower bound
[Sun Dec 18 23:06:13 2011] Source does appear to be extended
[Sun Dec 18 23:06:13 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 23:06:24 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Dec 18 23:06:24 2011] Initial guess for spatial extent in simple fitting = 5.88"
[Sun Dec 18 23:06:24 2011] source mask rpix=1.4, npix_max = 13, mask sum = 16, frac = 1.166
[Sun Dec 18 23:06:24 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.88"
[Sun Dec 18 23:50:00 2011] fullrun_pn_xmm0556050101_pi300-10000_cl_pass1_src1.ximg exists
[Sun Dec 18 23:50:00 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556050101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 23:50:00 2011] fullrun_pn_xmm0556050101_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Dec 18 23:50:00 2011] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0556050101_pi300-10000_cl_pass1_src1.csv
[Sun Dec 18 23:50:00 2011] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556050101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556050101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 23:50:00 2011] fullrun_pn_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Dec 18 23:50:00 2011] fullrun_pn_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Dec 18 23:50:00 2011] Fit fullrun_pn_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Dec 19 02:30:48 2011] Spatial fit model total counts = 77377.900000, observed total counts = 77378.000000
[Mon Dec 19 02:30:48 2011] Offset between fit and detection position for source 1 = 0.014704 pixels
[Mon Dec 19 02:30:48 2011] 77455.700000 total counts/ 15618.500000 bgd. counts: snr = 494.800529
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.014704 pixels
  Position = (270.3, 280.8) = 20 53 53.41 44 23 11.7
  Extent = 5.9 (5.8-5.9)", rotation angle = 0
  Source counts = 61837.2 +/- 278.3
  Background counts = 15618.5
  Rate = 6 +/- 0.03
[Mon Dec 19 02:30:48 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 02:30:48 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 02:30:48 2011] Assessing source extent using major axis lower bound
[Mon Dec 19 02:30:48 2011] Source does appear to be extended
[Mon Dec 19 02:30:48 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 02:31:06 2011] Counts = 61837.200000, rescaling region sizes by 3.000000
[Mon Dec 19 02:31:06 2011] XMMSAS src. selection expression = ellipse(23466.126200, 24385.123400, 1055.197830, 1055.197830, 0.000000, X, Y)
[Mon Dec 19 02:31:06 2011] Writing source region out to fullrun_pn_xmm0556050101_pi300-10000_pass1_cl_src1_src.reg
[Mon Dec 19 02:31:06 2011] Extracting stamp from image fullrun_pn_xmm0556050101_pi300-10000_cl_sm2.00.img.gz, (210, 220) - (331, 341)
[Mon Dec 19 02:31:06 2011] XMMSAS bgd. selection expression = annulus(23466.126200, 24385.123400, 5275.989152, 10551.978304, X, Y) && !ellipse(24925.665040, 24193.979400, 370.260011, 370.260011, 0.000000, X, Y) && !ellipse(19182.838318, 26026.173676, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23766.698608, 17077.272644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30193.707400, 29927.724000, 396.791211, 396.791211, 0.000000, X, Y) && !ellipse(26399.767466, 27562.934000, 513.090415, 513.090415, 0.000000, X, Y) && !ellipse(29798.823640, 25014.717400, 388.194411, 388.194411, 0.000000, X, Y) && !ellipse(32064.573360, 24654.544880, 918.640026, 450.604013, 110.372205, X, Y) && !ellipse(25998.838600, 22493.484200, 487.825614, 487.825614, 0.000000, X, Y) && !ellipse(29687.091000, 21235.318400, 528.091215, 354.446410, 115.309002, X, Y) && !ellipse(30699.104889, 31000.461334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25034.901600, 29132.210400, 643.292019, 643.292019, 0.000000, X, Y) && !ellipse(28432.397522, 24649.280792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18054.150848, 24594.289825, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24510.924561, 22769.812103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23767.030487, 22842.382019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22874.890000, 22267.966000, 1303.688038, 1303.688038, 0.000000, X, Y) && !ellipse(15249.088501, 20934.236359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14756.654907, 20793.122879, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 02:31:06 2011] Writing fullrun_pn_xmm0556050101_pi300-10000_pass1_cl_src1.gif
[Mon Dec 19 02:31:27 2011] Mean detx,y = (1434.03, 26.21) 
[Mon Dec 19 02:31:35 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 02:37:05 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 02:37:06 2011] Setting source spectrum file to fullrun_pn_xmm0556050101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 02:37:06 2011] Setting bgd. spectrum file to fullrun_pn_xmm0556050101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon Dec 19 04:51:55 2011] Updating aperture counts using extracted products
[Mon Dec 19 04:51:55 2011] Error reading totcts from fullrun_pn_xmm0556050101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon Dec 19 04:51:56 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 04:51:56 2011] Using photon index=1.80, rate=6.02, arf fullrun_pn_xmm0556050101_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 04:51:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 04:51:56 2011] Updating source flux to 1.4e-11
[Mon Dec 19 04:54:32 2011] Reading fit data from xmm0556050101/analysis//spectral/fullrun_pn_xmm0556050101_pi300-10000_pass1_cl_src1_pl.csv
[Mon Dec 19 04:54:32 2011] Spectral fit parameter nH value = 2.08434e+21
[Mon Dec 19 04:54:32 2011] Spectral fit parameter PhoIndex value = 3.08376
[Mon Dec 19 04:54:32 2011] Failed to get F(0.3-8.0) from xmm0556050101/analysis//spectral/fullrun_pn_xmm0556050101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon Dec 19 04:54:32 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 04:54:32 2011] Using Nh = 2.1e+21, photon index=3.08, rate=6.02, arf fullrun_pn_xmm0556050101_pi300-10000_pass1_cl_src1.arf
[Mon Dec 19 04:54:32 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 04:54:32 2011] Updating source flux to 1.1e-11