[Sun Dec 18 20:12:06 2011] Detection parameters:
  Position = (296.4, 426.3) = 20 53 42.80 44 33 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 143.8 +/- 18.3
  Background counts = 63.4
  Rate = 0.005 +/- 0.0007

[Sun Dec 18 20:12:06 2011] Off-axis axis estimate = 9.27'
[Sun Dec 18 22:42:09 2011] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 22:42:09 2011] Initial guess for spatial extent in simple fitting = 11.06"
[Sun Dec 18 22:42:09 2011] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Sun Dec 18 22:42:09 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 11.06"
[Sun Dec 18 23:06:07 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src11.ximg exists
[Sun Dec 18 23:06:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src11.csv
[Sun Dec 18 23:06:07 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun Dec 18 23:06:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src11.csv
[Sun Dec 18 23:06:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 23:06:07 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun Dec 18 23:06:07 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun Dec 18 23:06:07 2011] Fit fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun Dec 18 23:06:18 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.602857 pixels away
[Sun Dec 18 23:06:18 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 23:06:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 23:06:18 2011] Assessing source extent using major
[Sun Dec 18 23:06:18 2011] Source does appear to be extended
[Sun Dec 18 23:06:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 02:00:10 2011] Using EEF radius (= 11.06 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 02:00:10 2011] Initial guess for spatial extent in simple fitting = 11.06"
[Mon Dec 19 02:00:10 2011] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.972
[Mon Dec 19 02:00:10 2011] Giving source the simple spatial ID 11 for pass 1, mean size = 11.06"
[Mon Dec 19 02:30:41 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_src11.ximg exists
[Mon Dec 19 02:30:41 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_src11_1.ximg exists
[Mon Dec 19 02:30:41 2011] Fit fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_src11 appears to have run properly
[Mon Dec 19 02:30:41 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Mon Dec 19 02:30:41 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Mon Dec 19 02:30:42 2011] Fit fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Mon Dec 19 02:30:54 2011] Warning: source 11 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 13.602857 pixels away
[Mon Dec 19 02:30:54 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 02:30:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 02:30:54 2011] Assessing source extent using major
[Mon Dec 19 02:30:54 2011] Source does appear to be extended
[Mon Dec 19 02:30:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 04:19:51 2011] XMMSAS src. selection expression = ellipse(25741.042114, 37041.173370, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 04:19:51 2011] Writing source region out to fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src6_src.reg
[Mon Dec 19 04:19:51 2011] Extracting stamp from image fullrun_mos2_xmm0556050101_pi300-10000_cl_sm2.00.img.gz, (259, 389) - (334, 464)
[Mon Dec 19 04:19:51 2011] XMMSAS bgd. selection expression = annulus(25741.042114, 37041.173370, 1087.500000, 2175.000000, X, Y) && !ellipse(26122.453500, 34610.023600, 731.168021, 731.168021, 0.000000, X, Y)
[Mon Dec 19 04:19:51 2011] Writing fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src6.gif
[Mon Dec 19 04:26:32 2011] Mean detx,y = (1273.32, -12740.38) 
[Mon Dec 19 04:26:33 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 04:26:58 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 04:26:58 2011] Setting source spectrum file to fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 04:26:58 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Dec 19 04:50:57 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 19 04:50:57 2011] rmf not generated due to insufficient counts
[Mon Dec 19 04:51:57 2011] Updating aperture counts using extracted products
[Mon Dec 19 04:51:57 2011] Error reading totcts from fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 04:51:57 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 04:51:57 2011] Using photon index=1.80, rate=0.00521, arf fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src6.arf
[Mon Dec 19 04:51:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 04:51:57 2011] Updating source flux to 1e-13
[Mon Dec 19 04:52:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting