[Sun Dec 18 20:12:06 2011] Detection parameters:
  Position = (257.0, 300.9) = 20 53 58.80 44 24 39.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 78.6 +/- 17.8
  Background counts = 83.5
  Rate = 0.003 +/- 0.0007

[Sun Dec 18 20:12:06 2011] Off-axis axis estimate = 3.01'
[Sun Dec 18 22:42:09 2011] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 22:42:09 2011] Initial guess for spatial extent in simple fitting = 7.93"
[Sun Dec 18 22:42:09 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.741
[Sun Dec 18 22:42:09 2011] Giving source the simple spatial ID 13 for pass 0, mean size = 7.93"
[Sun Dec 18 23:06:07 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src13.ximg exists
[Sun Dec 18 23:06:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src13.csv
[Sun Dec 18 23:06:07 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun Dec 18 23:06:07 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src13.csv
[Sun Dec 18 23:06:07 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 23:06:07 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun Dec 18 23:06:07 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun Dec 18 23:06:07 2011] Fit fullrun_mos2_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun Dec 18 23:06:18 2011] Source 12 is offset by -3.630039 and 5.830761 pixels which is larger than
2 X fitted extent = 2.422846 x 2.422846, not incorporating fit results
[Sun Dec 18 23:06:18 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 23:06:18 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 23:06:18 2011] Assessing source extent using major
[Sun Dec 18 23:06:18 2011] Source does appear to be extended
[Sun Dec 18 23:06:18 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 02:00:10 2011] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Mon Dec 19 02:00:10 2011] Initial guess for spatial extent in simple fitting = 7.93"
[Mon Dec 19 02:00:10 2011] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.741
[Mon Dec 19 02:00:10 2011] Giving source the simple spatial ID 12 for pass 1, mean size = 7.93"
[Mon Dec 19 02:30:41 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_src12.ximg exists
[Mon Dec 19 02:30:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_src12.csv
[Mon Dec 19 02:30:41 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Dec 19 02:30:41 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_src12.csv
[Mon Dec 19 02:30:41 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 02:30:42 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Dec 19 02:30:42 2011] fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Dec 19 02:30:42 2011] Fit fullrun_mos2_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Dec 19 02:30:54 2011] Source 12 is offset by 5.400398 and -6.496871 pixels which is larger than
2 X fitted extent = 3.713710 x 3.713710, not incorporating fit results
[Mon Dec 19 02:30:54 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 02:30:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 02:30:54 2011] Assessing source extent using major
[Mon Dec 19 02:30:54 2011] Source does appear to be extended
[Mon Dec 19 02:30:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 04:19:51 2011] XMMSAS src. selection expression = ellipse(22313.242645, 26126.892212, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 04:19:51 2011] Writing source region out to fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src12_src.reg
[Mon Dec 19 04:19:51 2011] Extracting stamp from image fullrun_mos2_xmm0556050101_pi300-10000_cl_sm2.00.img.gz, (220, 263) - (295, 338)
[Mon Dec 19 04:19:51 2011] XMMSAS bgd. selection expression = annulus(22313.242645, 26126.892212, 1087.500000, 2175.000000, X, Y) && !ellipse(23486.687400, 24389.029960, 1314.537638, 1314.537638, 0.000000, X, Y) && !ellipse(24338.945038, 25019.073273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24389.117126, 24551.469513, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23037.438000, 24131.976000, 1306.776038, 1000.520029, 320.418000, X, Y)
[Mon Dec 19 04:19:51 2011] Writing fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src12.gif
[Mon Dec 19 04:27:01 2011] Mean detx,y = (-2380.72, -1839.34) 
[Mon Dec 19 04:27:03 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 04:27:19 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 04:27:19 2011] Setting source spectrum file to fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Dec 19 04:27:19 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Mon Dec 19 04:51:00 2011] Not generating rmf since there are only 78 counts
[Mon Dec 19 04:51:00 2011] rmf not generated due to insufficient counts
[Mon Dec 19 04:51:57 2011] Updating aperture counts using extracted products
[Mon Dec 19 04:51:57 2011] Error reading totcts from fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Mon Dec 19 04:51:57 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 04:51:57 2011] Using photon index=1.80, rate=0.00303, arf fullrun_mos2_xmm0556050101_pi300-10000_pass1_cl_src12.arf
[Mon Dec 19 04:51:57 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 04:51:57 2011] Updating source flux to 3e-14
[Mon Dec 19 04:52:35 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting