[Sun Dec 18 20:11:44 2011] Detection parameters:
  Position = (280.3, 277.8) = 20 53 49.33 44 22 54.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 214.0 +/- 30.2
  Background counts = 70.2
  Rate = 0.01 +/- 0.001

[Sun Dec 18 20:11:44 2011] Off-axis axis estimate = 1.99'
[Sun Dec 18 20:54:17 2011] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 20:54:17 2011] Initial guess for spatial extent in simple fitting = 7.42"
[Sun Dec 18 20:54:17 2011] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.513
[Sun Dec 18 20:54:17 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 7.42"
[Sun Dec 18 22:42:08 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src7.ximg exists
[Sun Dec 18 22:42:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src7.csv
[Sun Dec 18 22:42:08 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Dec 18 22:42:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src7.csv
[Sun Dec 18 22:42:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 22:42:09 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Dec 18 22:42:09 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Dec 18 22:42:09 2011] Fit fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Dec 18 23:06:15 2011] Source 6 is offset by 1.007962 and 4.454678 pixels which is larger than
2 X fitted extent = 0.832952 x 0.832952, not incorporating fit results
[Sun Dec 18 23:06:15 2011] Source 6 is offset by 6.722583 and -2.093211 pixels which is larger than
2 X fitted extent = 2.756464 x 2.756464, not incorporating fit results
[Sun Dec 18 23:06:15 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 23:06:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 23:06:15 2011] Assessing source extent using major
[Sun Dec 18 23:06:15 2011] Source does appear to be extended
[Sun Dec 18 23:06:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 23:06:15 2011] Source is confused with source 1
[Sun Dec 18 23:50:01 2011] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 23:50:01 2011] Initial guess for spatial extent in simple fitting = 7.42"
[Sun Dec 18 23:50:01 2011] source mask rpix=1.7, npix_max = 19, mask sum = 10, frac = 0.513
[Sun Dec 18 23:50:01 2011] Giving source the simple spatial ID 7 for pass 1, mean size = 7.42"
[Mon Dec 19 02:00:09 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src7.ximg exists
[Mon Dec 19 02:00:09 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src7.csv
[Mon Dec 19 02:00:09 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src7_1.ximg exists
[Mon Dec 19 02:00:09 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src7.csv
[Mon Dec 19 02:00:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 02:00:09 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Mon Dec 19 02:00:09 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Mon Dec 19 02:00:09 2011] Fit fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Mon Dec 19 02:30:51 2011] Source 6 is offset by -5.761003 and 6.617414 pixels which is larger than
2 X fitted extent = 3.884901 x 3.884901, not incorporating fit results
[Mon Dec 19 02:30:51 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 02:30:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 02:30:51 2011] Assessing source extent using major
[Mon Dec 19 02:30:51 2011] Source does appear to be extended
[Mon Dec 19 02:30:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 03:56:11 2011] XMMSAS src. selection expression = ellipse(24341.456696, 24119.321014, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 03:56:11 2011] Writing source region out to fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src6_src.reg
[Mon Dec 19 03:56:11 2011] Extracting stamp from image fullrun_mos1_xmm0556050101_pi300-10000_cl_sm2.00.img.gz, (243, 240) - (318, 315)
[Mon Dec 19 03:56:11 2011] XMMSAS bgd. selection expression = annulus(24341.456696, 24119.321014, 1087.500000, 2175.000000, X, Y) && !ellipse(23481.444800, 24388.192000, 1166.328034, 1166.328034, 0.000000, X, Y) && !ellipse(24911.192400, 24216.234800, 253.155207, 253.155207, 0.000000, X, Y) && !ellipse(26005.945007, 22420.922668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22798.558000, 24104.714000, 1208.744035, 1208.744035, 0.000000, X, Y) && !ellipse(23393.709473, 23796.968597, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 03:56:11 2011] Writing fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src6.gif
[Mon Dec 19 04:01:30 2011] Mean detx,y = (237.02, 510.49) 
[Mon Dec 19 04:01:31 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 04:01:41 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 04:01:42 2011] Setting source spectrum file to fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 04:01:42 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Mon Dec 19 04:19:43 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 19 04:19:43 2011] rmf not generated due to insufficient counts
[Mon Dec 19 04:51:56 2011] Updating aperture counts using extracted products
[Mon Dec 19 04:51:56 2011] Error reading totcts from fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Dec 19 04:51:56 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 04:51:56 2011] Using photon index=1.80, rate=0.00958, arf fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src6.arf
[Mon Dec 19 04:51:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 04:51:56 2011] Updating source flux to 9.5e-14
[Mon Dec 19 04:51:58 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting