[Sun Dec 18 20:11:44 2011] Detection parameters:
  Position = (299.5, 258.3) = 20 53 41.57 44 21 37.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 380.7 +/- 26.9
  Background counts = 91.8
  Rate = 0.02 +/- 0.001

[Sun Dec 18 20:11:44 2011] Off-axis axis estimate = 2.91'
[Sun Dec 18 20:54:17 2011] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 20:54:17 2011] Initial guess for spatial extent in simple fitting = 7.89"
[Sun Dec 18 20:54:17 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.935
[Sun Dec 18 20:54:17 2011] Giving source the simple spatial ID 3 for pass 0, mean size = 7.89"
[Sun Dec 18 22:42:08 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src3.ximg exists
[Sun Dec 18 22:42:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 22:42:08 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Dec 18 22:42:08 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src3.csv
[Sun Dec 18 22:42:08 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Dec 18 22:42:08 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Dec 18 22:42:08 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Dec 18 22:42:09 2011] Fit fullrun_mos1_xmm0556050101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Dec 18 23:06:15 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.468765 pixels away
[Sun Dec 18 23:06:15 2011] Vigneting correction estimate = 1.000000
[Sun Dec 18 23:06:15 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Dec 18 23:06:15 2011] Assessing source extent using major
[Sun Dec 18 23:06:15 2011] Source does appear to be extended
[Sun Dec 18 23:06:15 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Dec 18 23:50:01 2011] Using EEF radius (= 7.89 ")to estimate initial spatial extent for simple fitting
[Sun Dec 18 23:50:01 2011] Initial guess for spatial extent in simple fitting = 7.89"
[Sun Dec 18 23:50:01 2011] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.935
[Sun Dec 18 23:50:01 2011] Giving source the simple spatial ID 3 for pass 1, mean size = 7.89"
[Mon Dec 19 02:00:09 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src3.ximg exists
[Mon Dec 19 02:00:09 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src3.csv
[Mon Dec 19 02:00:09 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src3_1.ximg exists
[Mon Dec 19 02:00:09 2011] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src3.csv
[Mon Dec 19 02:00:09 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Dec 19 02:00:09 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Mon Dec 19 02:00:09 2011] fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Mon Dec 19 02:00:09 2011] Fit fullrun_mos1_xmm0556050101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Mon Dec 19 02:30:51 2011] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.468765 pixels away
[Mon Dec 19 02:30:51 2011] Vigneting correction estimate = 1.000000
[Mon Dec 19 02:30:51 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Dec 19 02:30:51 2011] Assessing source extent using major
[Mon Dec 19 02:30:51 2011] Source does appear to be extended
[Mon Dec 19 02:30:51 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Dec 19 03:56:11 2011] XMMSAS src. selection expression = ellipse(26005.945007, 22420.922668, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Dec 19 03:56:11 2011] Writing source region out to fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src2_src.reg
[Mon Dec 19 03:56:11 2011] Extracting stamp from image fullrun_mos1_xmm0556050101_pi300-10000_cl_sm2.00.img.gz, (262, 221) - (337, 296)
[Mon Dec 19 03:56:11 2011] XMMSAS bgd. selection expression = annulus(26005.945007, 22420.922668, 1087.500000, 2175.000000, X, Y) && !ellipse(23481.444800, 24388.192000, 1166.328034, 1166.328034, 0.000000, X, Y) && !ellipse(24911.192400, 24216.234800, 253.155207, 253.155207, 0.000000, X, Y) && !ellipse(22798.558000, 24104.714000, 1208.744035, 1208.744035, 0.000000, X, Y) && !ellipse(23393.709473, 23796.968597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24341.456696, 24119.321014, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Dec 19 03:56:11 2011] Writing fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src2.gif
[Mon Dec 19 03:59:41 2011] Mean detx,y = (2033.11, -1337.01) 
[Mon Dec 19 03:59:43 2011] Setting backscal keywords in source and bgd. spectrum
[Mon Dec 19 04:00:06 2011] Binned source spectrum to 10 counts/bin
[Mon Dec 19 04:00:07 2011] Setting source spectrum file to fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Dec 19 04:00:07 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Dec 19 04:11:44 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Dec 19 04:11:44 2011] rmf not generated due to insufficient counts
[Mon Dec 19 04:51:56 2011] Updating aperture counts using extracted products
[Mon Dec 19 04:51:56 2011] Error reading totcts from fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Dec 19 04:51:56 2011] Calculating source flux in energy range 0.30-8.00
[Mon Dec 19 04:51:56 2011] Using photon index=1.80, rate=0.0161, arf fullrun_mos1_xmm0556050101_pi300-10000_pass1_cl_src2.arf
[Mon Dec 19 04:51:56 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Dec 19 04:51:56 2011] Updating source flux to 1.7e-13
[Mon Dec 19 04:51:58 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting