[Fri Jun  1 16:45:20 2012] Detection parameters:
  Position = (229.9, 426.9) = 12 56 29.68 -5 36 20.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 199.6 +/- 20.8
  Background counts = 44.6
  Rate = 0.008 +/- 0.0008

[Fri Jun  1 16:45:21 2012] Off-axis axis estimate = 10.56'
[Fri Jun  1 16:48:00 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 16:48:00 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 16:48:00 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Fri Jun  1 16:48:00 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Fri Jun  1 16:48:00 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 11.71"
[Fri Jun  1 18:13:47 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src2.ximg exists
[Fri Jun  1 18:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src2.csv
[Fri Jun  1 18:13:47 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri Jun  1 18:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src2.csv
[Fri Jun  1 18:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 18:13:48 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri Jun  1 18:13:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun  1 18:13:48 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri Jun  1 18:13:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri Jun  1 18:13:48 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 19:14:58 2012] Warning, spatial fit 2 centroid is now closest to src. 4
[Fri Jun  1 19:14:58 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 19:14:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 19:14:58 2012] Assessing source extent using major
[Fri Jun  1 19:14:58 2012] Source does appear to be extended
[Fri Jun  1 19:14:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 19:15:11 2012] Using EEF radius (= 11.71 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 19:15:11 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Jun  1 19:15:11 2012] Initial guess for spatial extent in simple fitting = 11.71"
[Fri Jun  1 19:15:11 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.884
[Fri Jun  1 19:15:11 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 11.71"
[Fri Jun  1 21:17:05 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src2.ximg exists
[Fri Jun  1 21:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src2.csv
[Fri Jun  1 21:17:05 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src2_1.ximg exists
[Fri Jun  1 21:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src2.csv
[Fri Jun  1 21:17:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:17:06 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Fri Jun  1 21:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun  1 21:17:06 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Fri Jun  1 21:17:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src2.csv
[Fri Jun  1 21:17:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:59:12 2012] Warning, spatial fit 2 centroid is now closest to src. 4
[Fri Jun  1 21:59:12 2012] Spatial fit model total counts = 1102.810000, observed total counts = 1100.000000
[Fri Jun  1 21:59:12 2012] Offset between fit and detection position for source 2 = 1.154581 pixels
[Fri Jun  1 21:59:12 2012] Warning, changing simple spatial fit ID from 2 to 4
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.154581 pixels
  Position = (229.1, 426.1) = 12 56 29.93 -5 36 26.8
  Extent = 27.8 (27.7-55.7)", rotation angle = 0
  Source counts = 1061.8 +/- 32.6
  Background counts = 0.0
  Rate = 0.05 +/- 0.001
[Fri Jun  1 21:59:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:59:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:59:12 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:59:12 2012] Source does appear to be extended
[Fri Jun  1 21:59:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:59:12 2012] Source is confused with source 4
[Fri Jun  1 21:59:22 2012] Counts = 1061.780000, rescaling region sizes by 2.000000
[Fri Jun  1 21:59:22 2012] XMMSAS src. selection expression = ellipse(19879.992000, 37021.078000, 3339.480096, 3339.480096, 0.000000, X, Y)
[Fri Jun  1 21:59:22 2012] Writing source region out to fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src2_src.reg
[Fri Jun  1 21:59:22 2012] Extracting stamp from image fullrun_pn_xmm0556030101_pi300-10000_cl_sm2.00.img.gz, (37, 234) - (421, 595)
[Fri Jun  1 21:59:23 2012] XMMSAS bgd. selection expression = annulus(19879.992000, 37021.078000, 11131.600320, 22263.200641, X, Y) && !ellipse(25473.263800, 23928.931000, 1438.164041, 1438.164041, 0.000000, X, Y) && !ellipse(26146.292511, 36758.542847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20253.242000, 36298.746000, 1113.160032, 1113.160032, 0.000000, X, Y) && !ellipse(20619.458000, 35407.264000, 1701.328049, 1701.328049, 0.000000, X, Y) && !ellipse(20915.262000, 34708.132000, 2041.568059, 2041.568059, 0.000000, X, Y) && !ellipse(21081.390000, 34314.634000, 1606.256046, 1606.256046, 0.000000, X, Y) && !ellipse(39874.418854, 34234.918915, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35870.851400, 34501.122720, 439.292013, 439.292013, 0.000000, X, Y) && !ellipse(29366.173981, 34147.756958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14458.479187, 34223.735931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21309.843000, 33794.760000, 803.128023, 803.128023, 0.000000, X, Y) && !ellipse(16683.908813, 33431.852203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21794.124000, 32442.030000, 1505.648043, 1505.648043, 0.000000, X, Y) && !ellipse(39527.273773, 32202.456818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22082.004196, 31971.644501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22317.328000, 31539.078000, 1504.272043, 1504.272043, 0.000000, X, Y) && !ellipse(22236.296000, 31622.108000, 2786.640080, 2786.640080, 0.000000, X, Y) && !ellipse(11983.581680, 31087.320618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22574.252000, 30912.518000, 1257.400036, 1257.400036, 0.000000, X, Y) && !ellipse(23034.284034, 29698.106465, 2446.488070, 503.298626, 66.601066, X, Y) && !ellipse(23147.174000, 29422.319600, 2019.296058, 427.189612, 65.387842, X, Y) && !ellipse(17745.017800, 28462.235400, 448.734413, 448.734413, 0.000000, X, Y) && !ellipse(23267.956665, 27549.937469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29478.495600, 27249.253000, 429.782412, 429.782412, 0.000000, X, Y) && !ellipse(23871.182420, 28032.034000, 547.950416, 547.950416, 0.000000, X, Y) && !ellipse(24366.670200, 26476.200200, 514.171215, 514.171215, 0.000000, X, Y) && !ellipse(21978.951889, 26042.048096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18320.796768, 25378.699646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12191.811646, 25331.894135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31341.528780, 22587.476200, 375.607211, 375.607211, 0.000000, X, Y) && !ellipse(14832.773270, 14249.392975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34908.691786, 30938.080756, 1187.656034, 414.781927, 72.857180, X, Y) && !ellipse(26319.503967, 26850.958527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28181.624695, 26663.006348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25069.723267, 25956.898651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22512.839783, 24030.775787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25188.129608, 22328.737396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26286.958618, 22786.945007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16572.870178, 19708.019043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31033.471313, 19554.153458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25665.291000, 18877.791600, 431.718412, 431.718412, 0.000000, X, Y) && !ellipse(23438.507782, 17133.844681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25117.319977, 15112.278824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28373.370911, 38062.438354, 870.000000, 870.000000, 0.000000, X, Y)
[Fri Jun  1 21:59:23 2012] Writing fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src2.gif
[Fri Jun  1 22:04:35 2012] Mean detx,y = (158.56, 12712.88) 
[Fri Jun  1 22:04:42 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 22:12:30 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 22:12:30 2012] Setting source spectrum file to fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri Jun  1 22:12:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Jun  2 00:44:28 2012] Updating aperture counts using extracted products
[Sat Jun  2 00:44:28 2012] Error reading totcts from fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Jun  2 00:44:29 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 00:44:29 2012] Using photon index=1.80, rate=0.0483, arf fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src2.arf
[Sat Jun  2 00:44:29 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 00:44:29 2012] Updating source flux to 2.6e-13
[Sat Jun  2 00:45:03 2012] Flag c found in src. 2 procflags, skipping spectral fitting