[Fri Jun  1 16:45:20 2012] Detection parameters:
  Position = (293.4, 275.8) = 12 56 11.18 -5 47 21.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100166.5 +/- 362.6
  Background counts = 66.9
  Rate = 5 +/- 0.02

[Fri Jun  1 16:45:21 2012] Off-axis axis estimate = 1.68'
[Fri Jun  1 16:48:00 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 16:48:00 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jun  1 16:48:00 2012] source mask rpix=1.7, npix_max = 18, mask sum = 20, frac = 1.061
[Fri Jun  1 16:48:00 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.27"
[Fri Jun  1 18:13:47 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src1.ximg exists
[Fri Jun  1 18:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 18:13:47 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Jun  1 18:13:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src1.csv
[Fri Jun  1 18:13:47 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 18:13:48 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Jun  1 18:13:48 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Jun  1 18:13:48 2012] Fit fullrun_pn_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Jun  1 19:14:58 2012] Spatial fit model total counts = 82236.200000, observed total counts = 82101.000000
[Fri Jun  1 19:14:58 2012] Offset between fit and detection position for source 1 = 0.189164 pixels
[Fri Jun  1 19:14:58 2012] 82204.500000 total counts/ 16435.300000 bgd. counts: snr = 513.019344
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.189164 pixels
  Position = (293.4, 275.6) = 12 56 11.19 -5 47 21.4
  Extent = 6.0 (6.0-6.0)", rotation angle = 0
  Source counts = 65769.2 +/- 286.7
  Background counts = 16435.3
  Rate = 3 +/- 0.01
[Fri Jun  1 19:14:58 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 19:14:58 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 19:14:58 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 19:14:58 2012] Source does appear to be extended
[Fri Jun  1 19:14:58 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 19:15:11 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun  1 19:15:11 2012] Initial guess for spatial extent in simple fitting = 5.99"
[Fri Jun  1 19:15:11 2012] source mask rpix=1.4, npix_max = 14, mask sum = 12, frac = 0.851
[Fri Jun  1 19:15:11 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.99"
[Fri Jun  1 21:17:05 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src1.ximg exists
[Fri Jun  1 21:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 21:17:05 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Jun  1 21:17:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src1.csv
[Fri Jun  1 21:17:05 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:17:06 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Jun  1 21:17:06 2012] fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Jun  1 21:17:06 2012] Fit fullrun_pn_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Fri Jun  1 21:59:12 2012] Spatial fit model total counts = 82235.600000, observed total counts = 82101.000000
[Fri Jun  1 21:59:12 2012] Offset between fit and detection position for source 1 = 0.000024 pixels
[Fri Jun  1 21:59:12 2012] 82204.000000 total counts/ 16441.100000 bgd. counts: snr = 512.879713
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.000024 pixels
  Position = (293.4, 275.6) = 12 56 11.19 -5 47 21.4
  Extent = 6.0 (5.9-6.0)", rotation angle = 0
  Source counts = 65762.9 +/- 286.7
  Background counts = 16441.1
  Rate = 3 +/- 0.01
[Fri Jun  1 21:59:12 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:59:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:59:12 2012] Assessing source extent using major axis lower bound
[Fri Jun  1 21:59:12 2012] Source does appear to be extended
[Fri Jun  1 21:59:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:59:22 2012] Counts = 65762.900000, rescaling region sizes by 3.000000
[Fri Jun  1 21:59:22 2012] XMMSAS src. selection expression = ellipse(25473.263800, 23928.931000, 1078.623031, 1078.623031, 0.000000, X, Y)
[Fri Jun  1 21:59:22 2012] Writing source region out to fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src1_src.reg
[Fri Jun  1 21:59:22 2012] Extracting stamp from image fullrun_pn_xmm0556030101_pi300-10000_cl_sm2.00.img.gz, (231, 214) - (355, 338)
[Fri Jun  1 21:59:22 2012] XMMSAS bgd. selection expression = annulus(25473.263800, 23928.931000, 5393.115155, 10786.230310, X, Y) && !ellipse(20619.458000, 35407.264000, 1701.328049, 1701.328049, 0.000000, X, Y) && !ellipse(20915.262000, 34708.132000, 2041.568059, 2041.568059, 0.000000, X, Y) && !ellipse(21081.390000, 34314.634000, 1606.256046, 1606.256046, 0.000000, X, Y) && !ellipse(35870.851400, 34501.122720, 439.292013, 439.292013, 0.000000, X, Y) && !ellipse(29366.173981, 34147.756958, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14458.479187, 34223.735931, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21309.843000, 33794.760000, 803.128023, 803.128023, 0.000000, X, Y) && !ellipse(16683.908813, 33431.852203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21794.124000, 32442.030000, 1505.648043, 1505.648043, 0.000000, X, Y) && !ellipse(22082.004196, 31971.644501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22317.328000, 31539.078000, 1504.272043, 1504.272043, 0.000000, X, Y) && !ellipse(22236.296000, 31622.108000, 2786.640080, 2786.640080, 0.000000, X, Y) && !ellipse(22574.252000, 30912.518000, 1257.400036, 1257.400036, 0.000000, X, Y) && !ellipse(23034.284034, 29698.106465, 2446.488070, 503.298626, 66.601066, X, Y) && !ellipse(23147.174000, 29422.319600, 2019.296058, 427.189612, 65.387842, X, Y) && !ellipse(17745.017800, 28462.235400, 448.734413, 448.734413, 0.000000, X, Y) && !ellipse(23267.956665, 27549.937469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29478.495600, 27249.253000, 429.782412, 429.782412, 0.000000, X, Y) && !ellipse(23871.182420, 28032.034000, 547.950416, 547.950416, 0.000000, X, Y) && !ellipse(24366.670200, 26476.200200, 514.171215, 514.171215, 0.000000, X, Y) && !ellipse(21978.951889, 26042.048096, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18320.796768, 25378.699646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31341.528780, 22587.476200, 375.607211, 375.607211, 0.000000, X, Y) && !ellipse(14832.773270, 14249.392975, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24993.683228, 12987.121689, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34908.691786, 30938.080756, 1187.656034, 414.781927, 72.857180, X, Y) && !ellipse(26319.503967, 26850.958527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28181.624695, 26663.006348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25069.723267, 25956.898651, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22512.839783, 24030.775787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25188.129608, 22328.737396, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26286.958618, 22786.945007, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16572.870178, 19708.019043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31033.471313, 19554.153458, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25665.291000, 18877.791600, 431.718412, 431.718412, 0.000000, X, Y) && !ellipse(23438.507782, 17133.844681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25117.319977, 15112.278824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22358.522400, 13459.179600, 728.584021, 728.584021, 0.000000, X, Y)
[Fri Jun  1 21:59:22 2012] Writing fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src1.gif
[Fri Jun  1 21:59:46 2012] Mean detx,y = (123.11, -177.25) 
[Fri Jun  1 21:59:52 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun  1 22:04:08 2012] Binned source spectrum to 10 counts/bin
[Fri Jun  1 22:04:08 2012] Setting source spectrum file to fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Fri Jun  1 22:04:08 2012] Setting bgd. spectrum file to fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sat Jun  2 00:44:28 2012] Updating aperture counts using extracted products
[Sat Jun  2 00:44:28 2012] Error reading totcts from fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sat Jun  2 00:44:28 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 00:44:28 2012] Using photon index=1.80, rate=2.99, arf fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 00:44:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 00:44:29 2012] Updating source flux to 6.7e-12
[Sat Jun  2 00:47:13 2012] Reading fit data from xmm0556030101/analysis//spectral/fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src1_pl.csv
[Sat Jun  2 00:47:13 2012] Spectral fit parameter nH value = 3.84111e+20
[Sat Jun  2 00:47:13 2012] Spectral fit parameter PhoIndex value = 1.86362
[Sat Jun  2 00:47:13 2012] Failed to get F(0.3-8.0) from xmm0556030101/analysis//spectral/fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Sat Jun  2 00:47:13 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jun  2 00:47:13 2012] Using Nh = 3.8e+20, photon index=1.86, rate=2.99, arf fullrun_pn_xmm0556030101_pi300-10000_pass1_cl_src1.arf
[Sat Jun  2 00:47:13 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun  2 00:47:13 2012] Updating source flux to 7.1e-12