[Fri Jun  1 16:46:02 2012] Detection parameters:
  Position = (285.4, 264.2) = 12 56 13.51 -5 48 12.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.8 +/- 15.1
  Background counts = 18.1
  Rate = 0.003 +/- 0.0006

[Fri Jun  1 16:46:02 2012] Off-axis axis estimate = 2.65'
[Fri Jun  1 18:28:04 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 18:28:04 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Fri Jun  1 18:28:04 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.199
[Fri Jun  1 18:28:04 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.76"
[Fri Jun  1 19:14:48 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jun  1 19:14:48 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jun  1 19:14:48 2012] Fit fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_src12 appears to have run properly
[Fri Jun  1 19:14:48 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jun  1 19:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Jun  1 19:14:48 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jun  1 19:14:48 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Jun  1 19:14:48 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556030101_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 19:15:03 2012] Spatial fit model total counts = 248.698000, observed total counts = 1495.000000
[Fri Jun  1 19:15:03 2012] Poor agreement between spatial fit and data for source 18
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jun  1 19:15:03 2012] Warning: source 12 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.384582 pixels away
[Fri Jun  1 19:15:03 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 19:15:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 19:15:03 2012] Assessing source extent using major
[Fri Jun  1 19:15:03 2012] Source does appear to be extended
[Fri Jun  1 19:15:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:24:01 2012] Using EEF radius (= 7.76 ")to estimate initial spatial extent for simple fitting
[Fri Jun  1 21:24:01 2012] Initial guess for spatial extent in simple fitting = 7.76"
[Fri Jun  1 21:24:01 2012] source mask rpix=1.8, npix_max = 20, mask sum = 25, frac = 1.199
[Fri Jun  1 21:24:01 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.76"
[Fri Jun  1 21:58:57 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_src10.ximg exists
[Fri Jun  1 21:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_src10.csv
[Fri Jun  1 21:58:57 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Jun  1 21:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_src10.csv
[Fri Jun  1 21:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:58:57 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Jun  1 21:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Jun  1 21:58:57 2012] fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Jun  1 21:58:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Jun  1 21:58:57 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0556030101_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun  1 21:59:15 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 18 at 10.269915 pixels away
[Fri Jun  1 21:59:15 2012] Vigneting correction estimate = 1.000000
[Fri Jun  1 21:59:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun  1 21:59:15 2012] Assessing source extent using major
[Fri Jun  1 21:59:15 2012] Source does appear to be extended
[Fri Jun  1 21:59:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun  1 21:59:15 2012] Deleting source due to low Poisson probability 0.9